2019-06-19 Roy Rankin <rrankin@ihug.com.au>
	* configure.ac
	: Set release 0.31.0

2019-06-13 Rob Pearce <rob@fairview.ukfsn.org>
	* regression/*/*.asm regression/*/i2c_low.inc
        : Changed the quoting style of .assert and .sim directives as the
          escape gave trouble on my Gentoo box

2019-06-12 Rob Pearce <rob@fairview.ukfsn.org>
	* src/eeprom.cc
        : Fix behaviour when EEPGD and CFGS bits are both set. Allow zero-size
          EEPROM for flash-only devices like 12F1572
	* src/p18fk.cc
        : Correct pin-out of P18F14K22 and POR value of CMxCON0 registers

2019-06-09 Roy Rankin <rrankin@ihug.com.au>
	* cli/cmd_symbol.cc
	: Fix compiler warning
	* regression/p1xf18xx/Makefile regression/p1xf18xx/zcd_f1705.asm regression/run_regression.sh
	: add left out regression test 
	* src/p1xf1xxx.cc src/p1xf1xxx.h src/pic-processor.cc
	: Add p16lf1709 processor

2019-06-08 Roy Rankin <rrankin@ihug.com.au>
	* configure.ac
	: change to version 0.30.2
	* plat/win32/gpsim.nsi plat/win32/settings_reg.cpp src/breakpoints.h src/trace.h
	  src/gpsim_time.h
	: fixes for win32 build
	* src/clc.cc src/cwg.cc src/nco.cc
	: Replace %ld occurrences 

2019-06-07 Roy Rankin <rrankin@ihug.com.au>
	* cli/parse.yy
	: Fix compiler warning messages
	* regression/p12f675/p12f629.asm regression/p16f84/reset.asm
	  regression/p1xf18xx/p16f1825.asm regression/a2d/p18f1220.asm
	: test for int pin interrupt
	* regression/p1xf18xx/p16f1823_i2c.asm 
	  regression/p1xf18xx/p16f1823_i2c_v2.asm
	: indicate type (slave/master) of I2C tested
	* src/14bit-processors.cc src/14bit-processors.h
	* src/14bit-registers.cc src/14bit-registers.h
	: add INLVL (input level register), ODCON (Open Drain register)
	* src/14bit-tmrs.cc src/14bit-tmrs.h
	: Fix Bug #241 pwm does not work if tmr2 started last
	  add COG (Complimentary output generator) and pps support 
	* src/a2dconverter.cc src/a2dconverter.h
	: support more than 2 ANSEL registers
	* src/clc.cc src/clc.h src/cwg.cc src/cwg.h src/ssp.cc src/ssp.h
          src/tmr0.cc src/tmr0.h src/uart.cc src/uart.h src/nco.cc src/nco.h
          src/ioports.cc src/ioports.h src/comparator.cc src/comparator.h
	: add support for pps
	* src/intcon.cc src/intcon.h src/pic-ioports.cc
	: add INTCON_16::general_interrupt function
	* src/op_amp.cc src/op_amp.h src/pps.cc src/pps.h src/zcd.cc src/zcd.h
          src/Makefile.am src/makefile.mingw
	: New modules
	* src/p12x.cc src/p12x.h
	: Modify I2C link to ee prom
	* src/p12f6xx.cc src/p12f6xx.h src/p16f88x.cc src/p16f88x.h
	  src/p16x6x.cc src/p16x6x.h src/p16x7x.cc src/p16x7x.h
	  src/p16x8x.cc src/p16x8x.h
	: new int pin model
	* src/p18fk.cc src/p16f62x.h
	: cleanup
	* src/p18x.cc
	: P18F1220 change porta2 to open collector
	* src/p1xf1xxx.cc src/p1xf1xxx.h 
	  src/pic-processor.cc src/pic-processor.h
          regression/p1xf18xx/p16f1705.asm regression/p1xf18xx/p16f1709.asm
          regression/p1xf18xx/p16f1709_cog.asm 
          regression/p1xf18xx/p16f1709_i2c.asm
          regression/p1xf18xx/zcd_f1705.asm regression/run_regression.sh
          regression/p1xf18xx/Makefile
	: add p16f1709, p16f1705
	* src/pic-registers.h src/processor.h
	: Add INTEDG enum for option register
	* src/stimuli.cc src/stimuli.h
	: Add schmitt level control

2019-05-06 Roy Rankin <rrankin@ihug.com.au>
	* gui/gui_register.h gui/gui_src_asm.cc gui/gui_watch.cc
	: Fix core dump when trying to select W reg for watch window
	  and fix issue selecting registers for watch window from source
	  browser

2019-03-04 Roy Rankin <rrankin@ihug.com.au>
	* doc/gpsim.lyx
	: Simplifiy character set to lytex
	* extras/lcd/Makefile.am
	: remove examples/Makefile from EXTRA_DIST
	* regression/a2d/p18f1220.asm regression/a2d/p18f4321.asm 
	  regression/epwm/p18f1220.asm regression/epwm/p18f2321.asm
	  regression/epwm/p18f26k22.asm regression/epwm/p18f4321.asm
	  regression/p18f/reset.asm regression/usart_test/eusart_2455.asm
	  regression/wdt/nwdt_18f452.asm regression/wdt/nwdt_18f4620.asm
	: Fix depreciated CONFIG usage
	* regression/ccp/pwm_26k22.asm
	: Swap CCP3 and CCP4 duty cycle
	* regression/comparator/Makefile
	: fix sim_compar_873a rule
	* regression/comparator/compar_873a.asm
	: Add replace "FAILED" with "*** FAILED"
	* regression/interrupts_14bit/int_sleep.asm
	: add nop after sleep
	* regression/p16f88x/p16f886.asm
	: new program read value
	* regression/p18f/Makefile
	: Add p18f14k22.cod test and remove $(SCRIPT) from link step
	* regression/p18f452_ports/p18f452_ports.asm
	: Replace label FAILED with BAD
	* regression/p1xf18xx/Makefile
	: Add p16f1823_i2c_v2.cod to all:
	* regression/rt.sh
	: Look for FAILED in output log file
	* src/p16f88x.cc src/p12f6xx.cc src/p16x6x.cc src/p16x8x.cc src/p18x.cc 
       	  src/p18x.h src/p1xf1xxx.cc src/p1xf1xxx.h src/p16x7x.cc
	  src/pic-ioports.cc src/pic-ioports.h
	: Clean up intf (feature request #61)  new set_intf_bit()
	* src/p18fk.h src/p18fk.cc
	: Fix WDT for P19F14K22 processor
	* src/16bit-processors.cc src/16bit-processors.h
	: support WDTPS3 for postscale
	* src/comparator.cc
	: Give register name in debug printout

2019-01-01 Errol van de l'Isle <errolv@users.sourceforge.net>
	* cli/cmd_break.cc cli/cmd_break.h cli/cmd_bus.cc cli/cmd_bus.h
	  cli/cmd_dump.cc cli/cmd_dump.h cli/cmd_macro.cc cli/cmd_macro.h
	  cli/cmd_quit.cc cli/cmd_quit.h cli/cmd_x.cc cli/cmd_x.h cli/input.cc
	  cli/input.h cli/misc.h cli/ui_gpsim.cc cli/ui_gpsim.h
	: Fix warnings when built with -Wextra, stricter use of namespaces,
	  correct includes, general code review.

2018-12-30 Errol van de l'Isle <errolv@users.sourceforge.net>
	* extras/graphic_lcd/src/glcd.cc extras/graphic_lcd/src/glcd.h
	  extras/graphic_lcd/src/glcd_100X32_sed1520.cc
	  extras/graphic_lcd/src/glcd_100X32_sed1520.h
	  extras/graphic_lcd/src/sed1520.cc extras/graphic_lcd/src/sed1520.h
	  extras/graphic_lcd/src/ssd0323.cc extras/graphic_lcd/src/ssd0323.h
	  extras/lcd/lcd.h extras/lcd/lcdgui.cc extras/lcd/raw_lcd.cc
	  extras/lcd/raw_lcd.h
	: Fix warnings when built with -Wextra, stricter use of namespaces,
	  correct includes, general code review.

2018-12-30 Errol van de l'Isle <errolv@users.sourceforge.net>
	* gpsim/main.cc modules/encoder.cc modules/encoder.h
	  modules/push_button.cc modules/push_button.h modules/ttl.cc
	  modules/video.cc modules/video.h
	: Fix warnings when built with -Wextra, stricter use of namespaces,
	  correct includes, general code review.

2018-12-23 Errol van de l'Isle <errolv@users.sourceforge.net>
	* extras/ds1307/ds1307.cc extras/ds1307/ds1307.h
	  extras/graphic_lcd/src/osram.cc extras/graphic_lcd/src/osram.h
	  extras/lcd/hd44780.cc extras/lcd/hd44780.h extras/lcd/lcd.cc
	  extras/lcd/lcd.h extras/solar/solar.cc extras/solar/solar.h
	  src/breakpoints.h
	: Fix warnings when built with -Wextra, stricter use of namespaces,
	  correct includes, general code review.

2018-12-23 Errol van de l'Isle <errolv@users.sourceforge.net>
	* modules/i2c.cc modules/i2c.h modules/i2c2par.cc modules/i2c2par.h
	  modules/logic.cc modules/logic.h modules/m_stimuli.cc
	  modules/m_stimuli.h modules/resistor.cc modules/resistor.h
	  modules/switch.cc modules/switch.h modules/ttl.cc modules/ttl.h
	  modules/usart.cc modules/usart.h
	: Fix warnings when built with -Wextra, stricter use of namespaces,
	  correct includes, general code review.

2018-12-22 Errol van de l'Isle <errolv@users.sourceforge.net>
	* cli/socket.cc gui/gui_breadboard.cc gui/gui_breadboard.h
	  gui/gui_scope.cc gui/gui_scope.h gui/gui_statusbar.cc
	  gui/gui_statusbar.h gui/gui_symbols.cc gui/gui_symbols.h
	  modules/gpsim_modules.cc modules/i2c-eeprom.cc modules/i2c-eeprom.h
	  modules/led.cc modules/led.h

2018-12-20 Errol van de l'Isle <errolv@users.sourceforge.net>
	* src/12bit-processors.cc src/dspic/dspic-processors.cc
	  src/dspic/dspic-processors.h src/eeprom.cc src/eeprom.h
	  src/fopen-path.cc src/fopen-path.h src/p12f6xx.cc src/p12f6xx.h
	  src/p16x8x.cc src/p16x8x.h src/p1xf1xxx.cc src/p1xf1xxx.h
	: Fix warnings when built with -Wextra, stricter use of namespaces,
	  correct includes, general code review.

2018-12-20 Errol van de l'Isle <errolv@users.sourceforge.net>
	* src/icd.cc src/icd.h src/pic-processor.cc src/processor.cc
	  src/processor.h src/psp.cc src/psp.h src/spp.cc src/spp.h src/ssp.cc
	  src/ssp.h
	: Fix warnings when built with -Wextra, stricter use of namespaces,
	  correct includes, general code review.

2018-12-17 Errol van de l'Isle <errolv@users.sourceforge.net>
	* src/p16f91x.cc src/p16f91x.h src/p16x5x.cc src/p16x5x.h src/p16x6x.cc
	  src/p16x6x.h src/p16x7x.cc src/p16x7x.h src/p17c75x.cc src/p17c75x.h
	  src/p18fk.cc src/p18x.cc
	: Fix warnings when built with -Wextra, stricter use of namespaces,
	  correct includes, general code review.

2018-12-16 Errol van de l'Isle <errolv@users.sourceforge.net>
	* src/bitlog.cc src/bitlog.h src/gpsim_time.cc src/gpsim_time.h
	  src/hexutils.cc src/hexutils.h src/p12x.cc src/p12x.h src/p16f87x.cc
	  src/p16f87x.h src/p16f88x.cc src/p16f88x.h src/p16f8x.cc src/p16f8x.h
	: Fix warnings when built with -Wextra, stricter use of namespaces,
	  correct includes, general code review.

2018-12-13 Errol van de l'Isle <errolv@users.sourceforge.net>
	*src/16bit-instructions.cc src/16bit-instructions.h
	  src/16bit-processors.cc src/16bit-processors.h src/16bit-registers.cc
	  src/16bit-registers.h src/a2d_v2.cc src/a2d_v2.h src/a2dconverter.cc
	  src/a2dconverter.h src/breakpoints.cc
	: Fix warnings when built with -Wextra, stricter use of namespaces,
	  correct includes, general code review.

2018-12-10 Errol van de l'Isle <errolv@users.sourceforge.net>
	* src/clc.cc src/clc.h src/cwg.cc src/cwg.h src/i2c-ee.cc src/i2c-ee.h
	  src/nco.cc src/nco.h src/p16f62x.cc src/p16f62x.h src/pic-registers.cc
	  src/pic-registers.h
	: Fix warnings when built with -Wextra, stricter use of namespaces,
	  correct includes, general code review.

2018-12-10 Errol van de l'Isle <errolv@users.sourceforge.net>
	* src/comparator.cc src/comparator.h src/intcon.cc src/intcon.h
	  src/p18fk.cc src/p18fk.h src/p18x.cc src/p18x.h src/pic-processor.cc
	  src/pic-processor.h
	: Fix warnings when built with -Wextra, strict use of namespaces,
	  correct includes, general code review.

2018-12-06 Errol van de l'Isle <errolv@users.sourceforge.net>
	* src/14bit-tmrs.cc src/14bit-tmrs.h src/16bit-tmrs.cc src/16bit-tmrs.h
	  src/tmr0.cc src/tmr0.h
	: Fix warnings when built with -Wextra, strict use of namespaces,
	  correct includes, general code review.

2018-12-06 Errol van de l'Isle <errolv@users.sourceforge.net>
	* src/14bit-processors.cc src/14bit-processors.h
	: Fix warnings when built with -Wextra, strict use of namespaces,
	  correct includes, general code review.

2018-12-01 Errol van de l'Isle <errolv@users.sourceforge.net>
	* src/14bit-registers.cc src/14bit-registers.h src/breakpoints.cc
	  src/breakpoints.h src/expr.h src/processor.h src/program_files.cc
	  src/program_files.h src/ui.cc src/ui.h
	: Fix warnings when built with -Wextra, strict use of namespaces,
	  correct includes, general code review.

2018-12-01 Errol van de l'Isle <errolv@users.sourceforge.net>
	* src/ValueCollections.cc src/ValueCollections.h src/expr.cc src/expr.h
	  src/operator.cc src/operator.h src/sim_context.cc src/sim_context.h
	: Fix warnings when built with -Wextra, strict use of namespaces,
	  correct includes, general code review.

2018-11-29 Errol van de l'Isle <errolv@users.sourceforge.net>
	* src/pm_rd.cc src/pm_rd.h src/registers.cc src/registers.h
	  src/trace.cc src/trace.h
	: Fix warnings when built with -Wextra, strict use of namespaces,
	  correct includes, general code review.

2018-11-25 Errol van de l'Isle <errolv@users.sourceforge.net>
	* src/packages.cc src/packages.h
	: Fix warnings when built with -Wextra, strict use of namespaces,
	  correct includes, general code review.

2018-11-23 Errol van de l'Isle <errolv@users.sourceforge.net>
	* gui/gui_src.h src/gpsim_object.h src/symbol.cc
	: Strict use of namespaces

2018-11-23 Errol van de l'Isle <errolv@users.sourceforge.net>
	* src/gpsim_object.cc src/pic-instructions.cc src/pic-instructions.h
	  src/value.h
	: Fix warnings when built with -Wextra, strict use of namespaces,
	  correct includes

2018-11-22 Errol van de l'Isle <errolv@users.sourceforge.net>
	* src/dspic/gpsim_modules.cc
	: strict use of namespaces, correct includes

2018-11-22 Errol van de l'Isle <errolv@users.sourceforge.net>
	* extras/lcd/lcd.cc src/dspic/dspic-instructions.cc
	  src/modules.cc src/modules.h src/os_dependent.cc
	:

2018-11-20 Errol van de l'Isle <errolv@users.sourceforge.net>
	* src/lxt_write.c src/lxt_write.h src/xref.cc src/xref.h
	: Refactor, be explicit with namespaces

2018-11-05 Errol van de l'Isle <errolv@users.sourceforge.net>
	* src/attributes.cc src/attributes.h src/gpsim_object.cc
	  src/gpsim_object.h src/protocol.cc src/protocol.h src/stimuli.cc
	  src/stimuli.h
	: Fix warnings when built with -Wextra, be explicit with namespace,
	  correct includes

2018-11-01 Errol van de l'Isle <errolv@users.sourceforge.net>
	* src/cmd_manager.cc src/cmd_manager.h src/gpsim_interface.h
	  src/interface.cc src/interface.h
	: Fix warnings when built with -Wextra, be explicit with namespace,
	  correct includes, remove some dead code.

2018-11-01 Errol van de l'Isle <errolv@users.sourceforge.net>
	* src/value.h src/value.cc
	: Fix warnings when built with -Wextra, be explicit with namespace,
	  correct includes

2018-11-01 Errol van de l'Isle <errolv@users.sourceforge.net>
	*gui/gui_object.cc gui/gui_profile.cc gui/gui_regwin.cc
	 gui/gui_scope.cc gui/gui_src.cc gui/gui_symbols.cc gui/gui_trace.cc
	: Fix warnings when built with -Wextra

2018-10-25 Errol van de l'Isle <errolv@users.sourceforge.net>
	* src/uart.h src/uart.cc
	: Fix warnings when built with -Wextra, be explicit with namespace

2018-10-25 Errol van de l'Isle <errolv@users.sourceforge.net>
	* src/ui.h src/cc
	: Fix warnings when built with -Wextra, be explicit with namespace

2018-10-24 Errol van de l'Isle <errolv@users.sourceforge.net>
	* gui/gui_breadboard.cc gui/gui_break.cc gui/gui_interface.h
	  gui/gui_main.cc gui/gui_menu.cc gui/gui_object.h
	  gui/gui_profile.cc gui/gui_regwin.cc gui/gui_scope.cc
	  gui/gui_src.h gui/gui_src_asm.cc gui/gui_src_opcode.cc
	  gui/gui_stack.cc gui/gui_statusbar.cc gui/gui_stopwatch.cc
	  gui/gui_watch.cc gui/settings.h gui/settings_exdbm.cc
	: Fix warnings when built with -Wallextra

2018-10-22 Errol van de l'Isle <errolv@users.sourceforge.net>
	* src/ioports.cc src/ioports.h src/pic-ioports.cc src/pic-ioports.h
	: Tidy code correct includes, and other minor updates

2018-10-20 Errol van de l'Isle <errolv@users.sourceforge.net>
	* src/trigger.h src/trigger.cc
	: Be explicit with namespace, correct includes

2018-10-20 Errol van de l'Isle <errolv@users.sourceforge.net>
	* src/symbol.h src/symbol.cc
	: Be explicit with namespace, correct includes

2018-10-20 Errol van de l'Isle <errolv@users.sourceforge.net>
	* cli/cmd_clear.cc cli/cmd_disasm.cc cli/cmd_module.cc cli/cmd_set.cc
	  cli/cmd_stimulus.cc cli/cmd_symbol.cc cli/command.cc cli/parse.yy
	  cli/scan.ll gpsim/main.cc gui/gui_breadboard.cc modules/led.cc
	  modules/switch.cc src/ValueCollections.cc src/errors.cc
	  src/errors.h src/expr.cc src/icd.cc src/modules.cc src/operator.cc
	  src/stimuli.cc src/trigger.cc src/value.cc
	: Catch all exceptions by reference, exceptions Error and TypeMismatch
	  now inherit from the standard c++ libraries exceptions

2018-10-18 Errol van de l'Isle <errolv@users.sourceforge.net>
	* src/processor.h src/processor.cc
	: Be explicit with namespace, correct includes, remove deprecated cache,
	  and other minor code clean up.

2018-10-15 Errol van de l'Isle <errolv@users.sourceforge.net>
	* src/pie.cc src/pie.h
	: Correct includes and forward references

2018-10-15 Roy Rankin <rrankin@ihug.com.au>
	* src/14bit-tmrs.cc
	: remove debug prints
	* src/p1xf1xxx.cc src/p1xf1xxx.h
	: Add missing p16f1825 registers

2018-10-13 Errol van de l'Isle <errolv@users.sourceforge.net>
	* src/12bit-processors.cc src/12bit-processors.h
	: Be explicit with namespace, correct includes, reduce variable scope

2018-10-13 Errol van de l'Isle <errolv@users.sourceforge.net>
	* src/ValueCollections.cc src/ValueCollections.h
	: Catch the exception by reference, be explicit about namespaces

2018-10-13 Roy Rankin <rrankin@ihug.com.au>
	* src/14bit-tmrs.cc src/14bit-tmrs.h src/clc.cc src/clc.h
	  src/ioports.cc src/ioports.h src/nco.cc src/nco.h src/ssp.cc src/ssp.h
	  src/uart.cc src/uart.h src/p1xf1xxx.cc src/p1xf1xxx.h
	: Generalize apfcon, add missing ccp modules to p16f1825

2018-10-09 Errol van de l'Isle <errolv@users.sourceforge.net>
	* src/uart.cc src/uart.h
	: Fix possible memory leak

2018-10-08 Errol van de l'Isle <errolv@users.sourceforge.net>
	* src/dsm_module.cc
	: Fix variable type

2018-10-06 Errol van de l'Isle <errolv@users.sourceforge.net>
	* src/12bit-processors.cc src/14bit-processors.cc src/14bit-registers.cc
	  src/14bit-tmrs.cc src/16bit-instructions.cc src/16bit-processors.cc
	  src/16bit-registers.cc src/16bit-registers.h src/a2d_v2.cc
	  src/a2d_v2.h src/a2dconverter.cc src/breakpoints.cc
	  src/clc.cc src/comparator.cc src/ctmu.cc src/ctmu.h src/cwg.cc
	  src/cwg.h src/dspic/dspic-instructions.cc
	  src/dspic/dspic-processors.cc src/eeprom.cc src/gpsim_time.cc
	  src/i2c-ee.cc src/interface.cc src/ioports.cc
	  src/lcd_module.cc src/lcd_module.h src/p12x.cc src/p16x8x.cc
	  src/p18x.cc src/p1xf1xxx.cc src/pic-instructions.cc
	  src/pic-instructions.h src/pic-processor.cc src/pic-processor.h
	  src/pic-registers.cc src/pm_rd.cc src/processor.cc
	  src/processor.h src/spp.h src/ssp.cc src/stimuli.cc
	: Ensure member variables are initialised in the constructor

2018-09-29 Errol van de l'Isle <errolv@users.sourceforge.net>
	* src/16bit-instructions.h src/a2dconverter.h src/pm_rd.h src/psp.h
	  src/spp.cc src/spp.h src/ui.h
	: Ensure member variables are initialised in the constructor

2018-09-29 Errol van de l'Isle <errolv@users.sourceforge.net>
	* src/trace.cc src/trigger.cc src/uart.cc
	: Ensure member variables are initialised in the constructor

2018-09-27 Errol van de l'Isle <errolv@users.sourceforge.net>
	* src/14bit-tmrs.cc src/14bit-tmrs.h src/16bit-tmrs.cc src/tmr0.c
	: Ensure member variables are initialised in the constructor

2018-09-24 Errol van de l'Isle <errolv@users.sourceforge.net>
	* gui/gui_breadboard.cc
	: Replace C style memory allocation with c++ versions

2018-09-24 Errol van de l'Isle <errolv@users.sourceforge.net>
	* gui/gui_breadboard.cc gui/gui_breadboard.h gui/gui_object.cc
	  gui/gui_object.h gui/gui_profile.cc gui/gui_profile.h
	  gui/gui_regwin.cc gui/gui_regwin.h gui/gui_scope.cc gui/gui_scope.h
	  gui/gui_src.cc gui/gui_src.h gui/gui_src_asm.cc gui/gui_src_opcode.cc
	  gui/gui_stack.cc gui/gui_stack.h gui/gui_stopwatch.cc
	  gui/gui_stopwatch.h gui/gui_symbols.cc gui/gui_symbols.h
	  gui/gui_trace.cc gui/gui_trace.h gui/gui_watch.cc gui/gui_watch.h
	: Move reading and applying the window size and position configuration
	  into their base class.

2018-09-23 Errol van de l'Isle <errolv@users.sourceforge.net>
	* gpsim/main.cc modules/usart.cc src/16bit-instructions.cc
	  src/ValueCollections.h src/a2d_v2.cc src/comparator.cc src/icd.cc
	  src/lcd_module.cc src/operator.cc src/pic-instructions.cc src/value.cc
	: Use the safer snprintf instead of sprintf

2018-09-17 Errol van de l'Isle <errolv@users.sourceforge.net>
	* src/16bit-hexdecode.cc src/Makefile.am src/hexutils.cc
	  src/pic-processor.cc src/picdis.h
	: Remove src/picdis.h

2018-09-17 Errol van de l'Isle <errolv@users.sourceforge.net>
	* gui/gui.h gui/gui_breadboard.cc gui/gui_breadboard.h gui/gui_object.cc
	  gui/gui_object.h gui/gui_profile.cc gui/gui_regwin.cc
	  gui/gui_scope.cc gui/gui_src.cc gui/gui_src_asm.cc
	  gui/gui_src_opcode.cc gui/gui_stack.cc gui/gui_stack.h
	  gui/gui_statusbar.h gui/gui_stopwatch.cc gui/gui_stopwatch.h
	  gui/gui_symbols.cc gui/gui_symbols.h gui/gui_trace.cc
	  gui/gui_trace.h gui/gui_watch.cc gui/gui_watch.h
	: Move creating of the window and connecting of signals to the parent
	  class GUI_Object

2018-09-17 Errol van de l'Isle <errolv@users.sourceforge.net>
	* extras/graphic_lcd/src/glcd_100X32_sed1520.cc
	  extras/graphic_lcd/src/osram.cc extras/lcd/lcdgui.cc
	  gui/gui_breadboard.cc gui/gui_profile.cc gui/gui_regwin.cc
	  gui/gui_src.cc gui/gui_src_asm.cc gui/gui_stack.cc
	  gui/gui_stopwatch.cc gui/gui_symbols.cc gui/gui_trace.cc
	  gui/gui_watch.cc
	: Remove calls to the now usless gtk_window_set_wmclass(). GTK
	  documentation says not to use it.

2018-09-08 Errol van de l'Isle <errolv@users.sourceforge.net>
	* gui/gui_breadboard.h gui/gui_breadboard.cc
	: Code refactor, removed dead code, simplified memory management

2018-09-08 Errol van de l'Isle <errolv@users.sourceforge.net>
	* src/fopen_path.h src/fopen_path.cc
	: Refactor code, remove memory leak mentioned in the comments

2018-09-08 Errol van de l'Isle <errolv@users.sourceforge.net>
	* src/cod.h src/cod.cc
	: Fix possible memory leak, fix undefined behaviour of writing beyond
	  allocated memory, comment out unused private member functions,
	  remove dead code, set the correct include files, modernise the code

2018-09-05 Errol van de l'Isle <errolv@users.sourceforge.net>
	* cli/cmd_shell.h cli/cmd_shell.cc
	: Fix undefined behaviour when using std::string

2018-09-03 Errol van de l'Isle <errolv@users.sourceforge.net>
	* examples/scripts/client2.cc src/14bit-registers.cc src/a2dconverter.cc
          src/clc.cc src/cwg.cc src/lcd_module.cc src/nco.cc src/pic-registers.cc
	: Code review - correct printf usage

2018-09-03 Errol van de l'Isle <errolv@users.sourceforge.net>
	* Deleted gui/gui_callbacks.cc gui/gui_callbacks.h gui/gui_dialog.cc
          gui/gui_init.cc gui/Makefile.am gui/Makefile.mingw gui/gui_main.cc
	: Remove dead GUI code

2018-08-03 Roy Rankin <rrankin@ihug.com.au>
	* regression/ccp_628/ccp_628.asm
	: T1 requires PEIE to be set to wakeup proc from sleep
	* regression/p1xf18xx/p16f1503_nco.asm
	: NCO does not run during sleep when FOSC clock used
	* regression/p1xf18xx/p16f1788.asm
	: fix assert for correct register names
	* src/nco.cc src/nco.h
	: stop NCO clock during sleep if clock is FOSC
	* src/14bit-processors.cc src/p12f6xx.cc src/p12f6xx.h src/p1xf1xxx.cc
	  src/p1xf1xxx.h
	: Flag registers which reinitialize on non POR resets
	* src/intcon.cc src/intcon.h src/14bit-registers.cc
	: Allow PIR, OSCCON reinitialization on all types of reset if wdt_value
	  defined
	* src/pic-processor.cc src/pic-processor.h
	: Add add_sfr_registerR() which copies por_value to wdtr_value
	* src/pir.cc
	: add comment
	* src/registers.cc
	: reinitialize sfr registers on non POR resets is wdt_value defined

2018-07-12 Roy Rankin <rrankin@ihug.com.au>
	* src/ssp.cc src/ssp.h regression/spi/p16c62.asm
          regression/spi/p16f88.asm
	: Add SPI proto trace
        * src/16bit-processors.cc
	: delete osccon when processor closes
	* src/stimuli.cc src/stimuli.h src/processor.cc
	  src/registers.cc src/registers.h
	: fix address/value column in symbol GUI
        * src/pic-processor.cc
	: mclr pin name in processor symbol space
	* regression/p16f873/p16f873.asm
	: Fine tune interrupt handling

2018-07-12 Roy Rankin <rrankin@ihug.com.au>
	* src/14bit-registers.cc src/16bit-instructions.cc
	  src/16bit-registers.cc
	: Fix bug 228 Reading of PCL doesn't update PCLATH/PCLATU

2018-03-03 Errol van de l'Isle <errol@mail.uk>
	* gui/gui_menu.cc
	: Grey out the open file option on succesful open with the GUI

2018-01-27 Roy Rankin <rrankin@ihug.com.au>
	* src/makefile.mingw
	: Add new files for windows build
	* src/tmr0.cc src/uart.cc
	: Fix bug 235 	Core dump when specifying processor

2018-01-24 Roy Rankin <rrankin@ihug.com.au>
	* src/clc.cc src/clc.h src/nco.cc src/nco.h src/p12f6xx.cc
	  src/p12f6xx.h src/p1xf1xxx.cc src/p1xf1xxx.h
	: CLC operational for p16f1503 and p10f320
	*  regression/i2c/Makefile regression/p10f32x/Makefile
	   regression/p1xf18xx/Makefile regression/p1xf18xx/p16f1503.asm
	   regression/p1xf18xx/p16f1503_nco.asm
	   regression/p1xf18xx/p16f1788_comp.asm regression/run_regression.sh
	: New regression tests

2017-12-24 Roy Rankin <rrankin@ihug.com.au>
	* src/nco.cc src/nco.h
	: Fix sinks with same name causing core dump

2017-12-24 Roy Rankin <rrankin@ihug.com.au>
	* src/14bit-tmrs.cc src/14bit-tmrs.h src/Makefile.am src/a2dconverter.cc
	  src/a2dconverter.h src/clc.cc src/clc.h src/comparator.cc
	  src/comparator.h src/cwg.cc src/cwg.h src/nco.cc src/nco.h
	  src/tmr0.cc src/tmr0.h
	: Developing Configurable Logic Cell(CLC)
	* src/p1xf1xxx.cc src/p1xf1xxx.h src/pic-processor.cc
	  src/pic-processor.h
	: Add p16f1503 and p16lf1503 processors
	* src/eeprom.cc src/eeprom.h
	: Allow read only a one bits

2017-12-12 Roy Rankin <rrankin@ihug.com.au>
	* src/p18fk.cc src/p18fk.h
	: Fix 234 Seg fault with pic18f14k22 cod

2017-11-05 Roy Rankin <rrankin@ihug.com.au>
	* regression/p16f91x/i2c_slave.asm
	: SCL scope chan 0, SDA scope chan 1
	* regression/p1xf18xx/p16f1823_i2c.asm
	: Improve failed assert messages
	* src/p1xf1xxx.cc src/p1xf1xxx.h src/pic-processor.cc
	  src/pic-processor.h
	: Add processors p12lf1822, p12lf1840, p16lf1788, p16lf1823, p16lf1825
	* src/processor.cc
	: Fix uninitialized variables
	* modules/i2c2par.cc modules/i2c2par.h src/i2c-ee.cc src/i2c-ee.h
	  src/ssp.cc src/ssp.h
	: I2C - move data transitions off clock edge

2017-10-28 Roy Rankin <rrankin@ihug.com.au>
	* regression/ccp/pwm_26k22.asm regression/ccp/pwm_6520.asm
	  regression/ccp/pwm_877a.asm
	: improve messages for failed asserts
	* src/14bit-tmrs.cc src/14bit-tmrs.h src/p1xf1xxx.h
	: bug #233 T2 on p12f1822 can have prescale of 64

2017-10-15 Roy Rankin <rrankin@ihug.com.au>
	* src/ssp.cc src/ssp.h
	: bug #232 pic12f1822: I2C reads not working

2017-10-02 Roy Rankin <rrankin@ihug.com.au>
	* gpsim/main.cc
	: Fix core dump
	* regression/p10f32x/Makefile regression/p10f32x/p10f320.asm
	  regression/p10f32x/p10f320_cwg.asm regression/p10f32x/p10f320_nco.asm
	  regression/run_regression.sh src/14bit-tmrs.cc src/14bit-tmrs.h
	  src/Makefile.am src/ctmu.cc src/cwg.cc src/cwg.h src/nco.cc src/nco.h
	  src/p12f6xx.cc src/p12f6xx.h src/pir.h
	: Add Complementary Waveform Generator (CWG) and
	  Numerically Controlled Oscillator (NCOx) to p10f32x

2017-09-22 Roy Rankin <rrankin@ihug.com.au>
	* gui/gtkextra/gtkitementry.c
	: Fix write to invalid address
	* src/pm_rd.cc src/pm_rd.h
	: Fix uninitialized variable

2017-09-20 Roy Rankin <rrankin@ihug.com.au>
	* src/14bit-tmrs.cc src/14bit-tmrs.h
	: update tmr2 when required for GUI

2017-09-18 Roy Rankin <rrankin@ihug.com.au>
	* modules/i2c2par.cc
	: Fix Bug #231 i2c2par: Non-default slave addresses not honoured

2017-09-16 Roy Rankin <rrankin@ihug.com.au>
	* src/uart.cc
	: Fix Bug #230 PIC12F1822: RS232 Tx doesn't work unless Rx also enabled
	* src/a2dconverter.cc
	: Turn off debug output

2017-09-08 Roy Rankin <rrankin@ihug.com.au>
	* regression/p10f32x regression/p10f32x/Makefile
	  regression/p10f32x/p10f320.asm src/14bit-processors.cc
	  src/14bit-processors.h src/14bit-registers.cc src/14bit-registers.h
	  src/14bit-tmrs.cc src/14bit-tmrs.h src/a2dconverter.cc
	  src/a2dconverter.h src/p12f6xx.cc src/p12f6xx.h src/pic-processor.cc
          src/pic-processor.h src/pm_rd.cc src/pm_rd.h
	: Add P10[L]F32x processors - partial functionality
        * src/ssp.cc
	: Correct syntax

2017-07-09 Roy Rankin <rrankin@ihug.com.au>
	* configure.ac
	: Change to development release 0.30.1
	* src/trace.cc
	: bug 225 Program counter traces always decoded as single cycles due
	  to regression in r601

2017-06-12 Roy Rankin <rrankin@ihug.com.au>
	* configure.ac
	: Change to release 0.30.0
	* extras/i2c2par extras/i2c2par/Makefile.am extras/i2c2par/examples
	  extras/i2c2par/examples/Makefile.am extras/i2c2par/examples/i2c2par.asm
	  extras/i2c2par/i2c2par.cc extras/i2c2par/i2c2par.h
	  extras/i2c2par/makefile.mingw extras/i2c2par/module_manager.cc
	: Delete i2c2par source in extras as it is already included
	* extras/lcd/raw_lcd.cc extras/lcd/raw_lcd.h
	: Catch changes on cc pin
	* plat/win32/gpsim.nsi
	: Fix windows cleanup
	* extras/lcd/examples/lcd_916.asm extras/lcd/examples/lcd_917.asm
	  extras/lcd/examples/lcd_mod.asm regression/a2d/p16c71.asm
	  regression/a2d/p16f819.asm regression/a2d/p16f871.asm
	  regression/a2d/p16f873a.asm regression/a2d/p16f874a.asm
	  regression/a2d/p16f88.asm regression/ccp/pwm_877a.asm
	  regression/comparator/compar_882.asm regression/epwm/p16f882.asm
	  regression/epwm/p16f887.asm regression/epwm/p18f1220.asm
	  regression/epwm/p18f2321.asm regression/epwm/p18f26k22.asm
	  regression/epwm/p18f4321.asm regression/i2c/p16f819.asm
	  regression/i2c/p16f88.asm
	  regression/instructions_14bit/instructions_14bit.asm
	  regression/logic_test/logic_test.asm regression/node_test/node_test.asm
	  regression/p16f684/a2d_684.asm regression/p16f684/epwm.asm
	  regression/p16f690/epwm.asm regression/p16f84/p16f84.asm
	  regression/p16f88x/a2d.asm regression/p16f88x/comparator.asm
	  regression/p16f88x/epwm.asm regression/p16f88x/i2c_slave.asm
	  regression/p16f88x/p16f882.asm regression/p16f88x/p16f883.asm
	  regression/p16f88x/p16f886.asm regression/p16f88x/p16f887.asm
	  regression/p16f91x/i2c_slave.asm regression/p16f91x/p16f913.asm
	  regression/p16f91x/p16f914.asm regression/p16f91x/p16f916.asm
	  regression/p16f91x/p16f917.asm regression/p16f91x/pwm_914.asm
	  regression/p1xf18xx/p16f1823_spi.asm regression/psp/p16f871.asm
	  regression/psp/p18f452.asm regression/psp/p18f6520.asm
	  regression/register_stim/register_stim.asm
	  regression/resistor/resistor.asm regression/switch_test/switch_test.asm
	: Align interrupt code

2017-06-10 Roy Rankin <rrankin@ihug.com.au>
	* PROCESSORS doc/gpsim.html src/p18x.cc src/p18x.h src/pic-processor.cc
	  src/pic-processor.h
	: patch #46 Support for 18F258/18F458
	* src/16bit-registers.h src/pic-registers.cc src/registers.h
	:  bug #229 PCL of 16-bit devices isn't shown properly in RAM view
	* src/comparator.h
	: bug #227 Compile error
	* doc/gpsim.lyx
	: Update extras module section
	* src/lcd_module.cc
	: Fix debug print formats for 32 bit systems

2017-06-05 Roy Rankin <rrankin@ihug.com.au>
	* gui/gui_breadboard.cc
	: fix default filename for "Save Configuration"
	* modules/ttl.cc modules/usart.cc src/14bit-processors.cc
	  src/14bit-registers.cc src/dsm_module.cc src/p16f88x.cc
	  src/p16f8x.cc src/p18fk.cc src/p18x.cc src/stimuli.cc
	: Remove debug printf statements

2017-06-04 Roy Rankin <rrankin@ihug.com.au>
	* cli/cmd_stimulus.cc gui/gui_breadboard.cc
	: give full name for stimulus
	* cli/scan.ll
	: allow \"text\" as well as "text"
	* extras/lcd/Makefile.am plat/win32/gpsim.nsi
	: fixes for win32 build

2017-06-01 Roy Rankin <rrankin@ihug.com.au>
	* src/makefile.mingw plat/win32/gpsim.nsi extras/makefile.mingw
	  gpsim/makefile.mingw gui/makefile.mingw plat/win32/make.mingw
	  extras/ds1307/examples/Makefile extras/Makefile.am
	  src/uart.cc src/uart.h
	: Fix windows build
	* extras/lcd/Makefile.am extras/lcd/examples/lcd_916.asm
	  extras/lcd/examples/lcd_917.asm extras/lcd/examples/p16c64.inc
	  extras/lcd/examples/p16c84.inc extras/lcd/raw_lcd.cc
	  extras/lcd/raw_lcd.h extras/module_manager.cc
	: Add 7 segment LCD display
	* src/a2d_v2.cc src/a2dconverter.cc
	: Improve debugging
	* src/interface.cc
	: remove blank line
	* src/lcd_module.cc src/lcd_module.h src/p16f91x.cc src/p16f91x.h
	  src/14bit-tmrs.cc src/14bit-tmrs.h regression/p16f91x/Makefile
	  regression/p16f91x/p16f913.asm
	: Implement LCD module
	* src/p16f88x.cc
	: fix 16f685 program memory r/w
	* src/p16f8x.cc src/p16f8x.h src/14bit-registers.cc
	  src/14bit-registers.h src/p1xf1xxx.cc
	  regression/p18f26k22/osccon_26k22.asm
	: Fix osccon wake issue

2017-05-08 Roy Rankin <rrankin@ihug.com.au>
	* regression/p16f91x/Makefile regression/p16f91x/ccp_917.asm
	  regression/p16f91x/compar_917.asm regression/p16f91x/i2c_low.inc
	  regression/p16f91x/i2c_slave.asm regression/p16f91x/p16f913.asm
	  regression/p16f91x/p16f914.asm regression/p16f91x/p16f916.asm
	  regression/p16f91x/p16f917.asm regression/p16f91x/pwm_914.asm
	  regression/p16f91x/usart_917.asm regression/p18f26k22/osccon_26k22.asm
	  regression/run_regression.sh src/14bit-processors.cc
	  src/14bit-registers.cc src/14bit-registers.h src/Makefile.am
	  src/a2dconverter.cc src/a2dconverter.h src/comparator.cc src/comparator.h
	  src/eeprom.cc src/lcd_module.cc src/lcd_module.h src/p16f91x.cc
	  src/p16f91x.h src/pic-processor.cc src/pic-processor.h src/pir.cc
	  src/pir.h
	: Add P16f91x processors (LCD functionality pending)

2017-04-27 Roy Rankin <rrankin@ihug.com.au>
	* regression/p16f690/Makefile regression/p16f690/eusart.asm
	   regression/run_regression.sh regression/p16f690/eusart_690.asm
	: Add 690 eusart test
	* regression/p16f690/p16f690.asm regression/p18f26k22/Makefile
	  regression/p18f26k22/osccon_26k22.asm regression/p1xf18xx/p16f1823.asm
	  regression/p1xf18xx/p16f1823_i2c.asm regression/p1xf18xx/p16f1825.asm
	  regression/wdt/nwdt_16f1823.asm regression/wdt/nwdt_16f88.asm
	  regression/wdt/wdt_16f88.asm regression/p1xf18xx/Makefile
	  regression/p16f88x/eusart.asm
	: Add OSCCON test, fix assert messages
	* src/14bit-processors.cc src/14bit-processors.h src/14bit-registers.h
	  src/16bit-processors.h src/16bit-registers.cc src/16bit-registers.h
	  src/p16f88x.cc src/p16f8x.cc src/p16f8x.h src/p18fk.cc src/p18fk.h
	  src/p18x.cc src/p18x.h src/processor.cc src/processor.h
	  src/14bit-registers.cc
	: Bug #226 OSCCON not setting LTS bit for p16f685, 2 clock startup
	* src/p1xf1xxx.cc src/p1xf1xxx.h
	: Add DSM functionality
	* extras/solar/solar.cc extras/solar/solar.h src/a2dconverter.cc
	  src/cod.cc src/trace.cc
	: fix debug format

2017-04-19 Roy Rankin <rrankin@ihug.com.au>
	* src/p18x.cc src/p18x.h src/pic-processor.cc src/pic-processor.h
	: Feature request #55 Add P18f2525 processor

2017-03-23 Errol van de l'Isle <evandel@cix.co.uk>
	* cli/cmd_module.cc cli/input.cc extras/rs232-gen/rs232-gen.c
	  extras/solar/solar.cc modules/paraface.cc modules/resistor.cc
	  modules/ttl.cc src/fopen-path.cc src/pic-processor.cc
	  src/registers.cc src/trace.cc
	: Remove unused variables

2017-03-23 Errol van de l'Isle <evandel@cix.co.uk>
	* src/processor.cc
	: Removed unused variables

2017-03-23 Errol van de l'Isle <evandel@cix.co.uk>
	* src/os_dependent.cc
	: Removed unused variable and redundent expression

2017-03-16 Errol van de l'Isle <evandel@cix.co.uk>
	* cli/socket.cc examples/scripts/client3.cc src/cod.cc src/lxt_write.c
	: Correct some undefined behaviour
	* gui/gui_breadboard.cc
	: Fix memory reallocation error

2017-03-13 Errol van de l'Isle <evandel@cix.co.uk>
	* src/trace.h
	: Fix integer to bool  logic

2017-03-13 Errol van de l'Isle <evandel@cix.co.uk>
	* src/14bit-registers.h src/bitlog.h src/breakpoints.h
	  src/clock_phase.h src/errors.h src/expr.h src/gpsim_interface.h
	  src/gpsim_object.h src/ioports.h src/modules.h src/operator.h
	  src/packages.h src/pic-instructions.h src/processor.h
	  src/program_files.h src/stimuli.h src/trace.h
	  src/trigger.h src/value.h src/xref.h
	: code review, make signle argument constrctors explicit.

2017-03-11 Errol van de l'Isle <evandel@cix.co.uk>
	* src/value.h src/value.cc
	: Change internals of class String to use std::string instead of char *

2017-02-23 Errol van de l'Isle <evandel@cix.co.uk>
	* src/icd.cc
	: Fix build error.

2017-02-23 Errol van de l'Isle <evandel@cix.co.uk>
	* cli/input.cc cli/socket.cc plat/win32/fd2raw.cpp plat/win32/fd2raw.h
	  plat/win32/icd.cc plat/win32/unistd.h src/icd.h src/interface.cc
	  autoconf.ac
	: Set the minimum GLib version to version 2.26 and remove checks for
	  versions lower than this.

2017-02-18 Roy Rankin <rrankin@ihug.com.au>
	* gui/settings_exdbm.cc
	: fix error detected by gcc-7

2017-02-12 Roy Rankin <rrankin@ihug.com.au>
	* src/14bit-instructions.h src/pic-instructions.cc
	: Bug #224 14bits Enhanced Instruction BRW not working

2017-01-26 Errol van de l'Isle <evandel@cix.co.uk>
	* configure.ac
	: Add extra gcc and clang run time sanitization build options

2017-01-26 Errol van de l'Isle <evandel@cix.co.uk>
	* gui/gui_regwin.cc
	: Correct error in svn r2392

2017-01-22 Errol van de l'Isle <evandel@cix.co.uk>
	* src/14bit-processors.cc src/14bit-registers.h src/16bit-processors.cc
	  src/bit.cc src/dspic/dspic-instructions.cc src/p12x.cc
	  src/pic-ioports.cc src/registers.h src/uart.cc gui/gui_processor.h
	: Clarify calculation precedence for '&' and '?'.

2017-01-22 Errol van de l'Isle <evandel@cix.co.uk>
	* gui/gui_breadboard.cc gui/gui_breadboard.h gui/gui_main.cc
	  gui/gui_menu.cc gui/gui_processor.h gui/gui_profile.h
	  gui/gui_register.h gui/gui_regwin.cc gui/gui_regwin.h
	  gui/gui_scope.cc gui/gui_scope.h gui/gui_src.h
	  gui/gui_stack.h gui/gui_statusbar.h gui/gui_stopwatch.h
	  gui/gui_symbols.h gui/gui_trace.h gui/gui_watch.h
	  gui/settings_exdbm.h
	: Some code tidy

2016-12-25 Errol van de l'Isle <evandel@cix.co.uk>
	* cli/cmd_macro.cc cli/cmd_module.cc cli/input.cc modules/i2c.cc
	  src/a2dconverter.cc src/errors.cc src/errors.h src/modules.cc
	  src/modules.h src/operator.cc src/operator.h src/registers.cc
	  src/ssp.cc
	: Minor optimisations

2016-12-24 Errol van de l'Isle <evandel@cix.co.uk>
	* cli/cmd_break.cc cli/socket.cc extras/lcd/hd44780.cc
	extras/rs232-gen/rs232-gen.c modules/i2c.cc src/14bit-instructions.cc
	src/14bit-registers.cc src/14bit-tmrs.cc src/16bit-instructions.cc
	src/ValueCollections.h src/a2d_v2.cc src/a2dconverter.cc
	src/breakpoints.cc src/comparator.cc src/dsm_module.cc
	src/dspic/dspic-processors.cc src/expr.cc src/i2c-ee.cc src/icd.cc
	src/ioports.cc src/p1xf1xxx.cc src/pic-instructions.cc
	src/pic-ioports.cc src/processor.cc src/ssp.cc src/tmr0.cc src/trace.cc
	src/trigger.cc src/uart.cc src/value.cc
	: Correct the usage of printf and scanf type functions, enforceing
	the correct signed and data widths.

2016-11-24 Errol van de l'Isle <evandel@cix.co.uk>
	* gui/gtkextra/gtkitementry.c gui/gtkextra/gtksheet.c gui/gui_regwin.cc
	: Fix some minor issues with gtk extra

2016-11-19 Errol van de l'Isle <evandel@cix.co.uk>
	* gui/gui_profile.h gui/gui_profile.cc
	: Removed unreachable code leaving stubs so that profiling information
	can be added at a later date. Current and previous code is unable
	to extract profiling information.

2016-11-10 Errol van de l'Isle <evandel@cix.co.uk>
	* src/ioports.h gui/gtkextra/gtksheets.c
	: Remove possible buffer over flows
	* cli/cmd_dump.cc src/program_files.cc src/sim_context.cc
	: Minor loop optimization
2016-10-31 Roy Rankin <rrankin@ihug.com.au>
	* gui/gui_breadboard.cc gui/gui_breadboard.h
	: bug #223 sigsegv in gui_breadboard.cc:646
	* src/dsm_module.cc src/dsm_module.h
	: Data Signal Modulator (in developement)

2016-07-15 Roy Rankin <rrankin@ihug.com.au>
	* extras/dht11/examples/Makefile extras/ds1820/examples/Makefile
	  src/Makefile.am
	: Fix missing files for "make dist"
	* gui/gui_menu.cc
	: patch #45 Simulation time cycles in decimal by default

2016-07-10 Errol van de l'Isle <evandel@cix.co.uk>
	* gui/Makefile.am gui/gtkextra gui/gtkextra/COPYING
	  gui/gtkextra/README.gpsim
	  gui/gtkextra/gtkextra-marshal.c
	  gui/gtkextra/gtkextra-marshal.h
	  gui/gtkextra/gtkextra.c
	  gui/gtkextra/gtkextrafeatures.h
	  gui/gtkextra/gtkitementry.c
	  gui/gtkextra/gtkitementry.h
	  gui/gtkextra/gtksheet.c
	  gui/gtkextra/gtksheet.h
	  gui/gui_regwin.h
	  gui/gui_symbols.cc
	  modules/logic.cc
	: Include GtkSheet from GtkExtra to remove external dependedncy on it.

2016-07-07 Roy Rankin <rrankin@ihug.com.au>
	* regression/instructions_16bit/instructions_16bit.asm
	: Fix assemble error with gputils < 1.4.0

2016-07-01 Roy Rankin <rrankin@ihug.com.au>
	* cli/input.cc cli/socket.cc extras/dht11/dht11.cc
	  extras/ds1820/bit1w.cc extras/lcd/hd44780.cc extras/lcd/hd44780.h
	  extras/lcd/lcd.cc extras/lcd/lcd.h extras/lcd/lcdgui.cc
	  gui/gui_menu.cc modules/usart.cc src/14bit-registers.cc
	  src/14bit-tmrs.cc src/a2d_v2.cc src/a2dconverter.cc src/icd.cc
	  src/p16f88x.cc src/p17c75x.cc src/p18x.cc src/pic-ioports.cc
	  src/pic-registers.cc src/stimuli.cc src/tmr0.cc src/uart.cc
	: Fix GCC 6.1.1 warning messages
	* regression/instructions_16bit/instructions_16bit.asm
	: Fix assemble error with gputils 1.4.2

2016-06-30 Roy Rankin <rrankin@ihug.com.au>
	* src/16bit-processors.h src/p18fk.cc
	: Bug #222 breadboard issue with 18f26k22 clock pin labels

2016-06-28 Roy Rankin <rrankin@ihug.com.au>
	* src/ssp.h src/ssp.cc
	: Bug #221 When selecting I2C, SSx pin may change name in breadboard

2016-03-22 Roy Rankin <rrankin@ihug.com.au>
	* regression/p18f26k22/Makefile regression/p18f26k22/sync_26k22.asm
	  src/16bit-processors.cc src/p18fk.cc src/pir.cc src/pir.h
	  src/uart.cc src/uart.h
	: Add synchronous functionallity to euart.
	  Uart sets name pin name when active

2016-03-15 Roy Rankin <rrankin@ihug.com.au>
	* cli/cmd_load.cc doc/gpsim.lyx
	: Bug #220 Make documentation more clear for processor loading

2016-02-15 Roy Rankin <rrankin@ihug.com.au>
	 * src/14bit-tmrs.cc src/14bit-tmrs.h
	 : Bug #219 TMR2 can exceed 255 after changing prescale bits of T2CON
	 * src/p18x.cc src/pic-processor.cc
	 : regression causing add_sfr_register to be called twice for osccon

2016-02-06 Roy Rankin <rrankin@ihug.com.au>
	* regression/p1xf18xx/Makefile regression/p1xf18xx/p12f1840.asm
	  regression/p1xf18xx/p16f1825.asm src/p1xf1xxx.cc src/p1xf1xxx.h
	  src/pic-processor.cc src/pic-processor.h
	: Feature 52 Add p16f1825, fix devID for p12f1840

2016-02-04 Errol van de l'Isle <evandel@cix.co.uk>
	* gui/gui_src_asm.cc
	: Fix bug 217 issue with right click, fix memory leak

2016-02-04 Roy Rankin <rrankin@ihug.com.au>
	* regression/p1xf18xx/12f1822_g.lkr
	  regression/p1xf18xx/16f1788_g.lkr
	  regression/p1xf18xx/16f1823_g.lkr
	  regression/p1xf18xx/Makefile
	  regression/p1xf18xx/p12f1840.asm
	: Add basic p12f1840 test, cleanup Makefile
	* src/p1xf1xxx.cc src/p1xf1xxx.h src/pic-processor.cc
	  src/pic-processor.h
	: Feature 51 - Add p12f1840 processor

2016-02-02 Errol van de l'Isle <evandel@cix.co.uk>
	* gui/gui_regwin.cc
	: Bug fixes + patch from Rob Pearce.
	  Added some input sanitization (feature 49)

2016-02-01 Roy Rankin <rrankin@ihug.com.au>
	* src/ssp.cc src/ssp.h regression/spi/p16c62.asm
          regression/spi/p16f88.asm
	: Add SPI proto trace
        * src/16bit-processors.cc
	: delete osccon when processor closes
	* src/stimuli.cc src/stimuli.h src/processor.cc
	  src/registers.cc src/registers.h
	: fix address/value column in symbol GUI
        * src/pic-processor.cc
	: mclr pin name in processor symbol space
	* regression/p16f873/p16f873.asm
	: Fine tune interrupt handling

2016-01-31 Roy Rankin <rrankin@ihug.com.au>
	* src/i2c-ee.cc src/ioports.cc src/ioports.h
	: support for separate symbol space

2016-01-31 Roy Rankin <rrankin@ihug.com.au>
	* modules/Makefile.am modules/makefile.mingw modules/m_stimuli.cc
	  modules/m_stimuli.h modules/stimuli.cc modules/stimuli.h
	: rename stimuli file for gdb as same file name used in src
	* modules/encoder.cc modules/gpsim_modules.cc modules/i2c-eeprom.cc
	  modules/i2c.cc modules/i2c2par.cc modules/i2c2par.h modules/led.cc
	  modules/led.h modules/logic.cc modules/logic.h modules/push_button.cc
	  modules/resistor.cc modules/switch.cc modules/ttl.cc modules/ttl.h
	  modules/usart.cc modules/usart.h modules/video.cc
	: Fix memory issues on module removal (bug 214),
	  separate module symbol space
	* extras/ds1307/ds1307.cc extras/ds1307/ds1307.h
	: Bug 213 ds1307 not at i2c address 0xd0

2016-01-30 Roy Rankin <rrankin@ihug.com.au>
	* src/14bit-tmrs.cc src/14bit-tmrs.h src/16bit-tmrs.cc
	  src/16bit-tmrs.h src/p18fk.cc
	: bug 215 Issues with tmr1_freq
	* src/symbol.cc
	: Print message when adding same name symbol with different value

2016-01-29 Errol van de l'Isle <evandel@cix.co.uk>
	* gui/gui_src_opcode.cc
	: Fix build with gtk extra 2
	* gui/gui_regwin.cc
	: Bug 216 - Fix numerical inputs

2016-01-19 Rob Pearce <rob@fairview.ukfsn.org>
	* src/16bit-processors.cc src/16bit-processors.h src/16bit-registers.cc
	  src/p12f6xx.cc src/p12f6xx.h src/p16f88x.cc src/p16f88x.h
	  src/p16f8x.cc src/p16f8x.h src/p1xf1xxx.cc src/p1xf1xxx.h
	  src/pic-ioports.cc src/pic-processor.cc src/pic-processor.h
	: Changed "osccon" member of processor classes to a pointer so that it
	  can be properly virtual
	* src/Makefile.am src/p18fk.h src/p18fk.cc src/p18x.cc src/p18x.h
	  src/a2d_v2.cc src/a2d_v2.h src/pir.h
	: Reduce excessive file size (18FxxKyy family separate from other 18x)
	: Implement PIC18F14K22 processor
	* src/14bit-registers.cc
	: Fixed bug in setting IOFS (HFIOFS) bit of OSCCON

2016-01-05 Roy Rankin <rrankin@ihug.com.au>
	* cli/input.cc src/hexutils.cc src/icd.cc src/sim_context.cc
	: Fix unused results warnings
	* src/comparator.cc
	: Fix free cm_an in CMCON destructor

2015-12-23 Roy Rankin <rrankin@ihug.com.au>
	* src/pic-ioports.cc src/pic-ioports.h
	: PicPortGRegister generalize intf bit
	* src/14bit-tmrs.cc src/14bit-tmrs.h
	: add dummy registers triscpp, dataccp
	* src/pic-processor.cc src/pic-processor.h src/p16x7x.cc src/p16x7x.h
        : Bug 212 - add 16f716, fix package 16c712, 16c716

2015-11-28 Errol van de l'Isle <evandel@cix.co.uk>
	* gui/gui_main.cc gui/gui_menu.cc gui/gui_regwin.cc gui/gui_regwin.h
	  gui/gui_stopwatch.cc gui/gui_stopwatch.h
	: Reduce the number of global variables

2015-11-28 Errol van de l'Isle <evandel@cix.co.uk>
	* extras/lcd/hd44780.cc extras/lcd/lcd.cc gui/gui_symbols.cc
	  modules/encoder.cc modules/logic.cc modules/stimuli.cc
	  modules/ttl.cc src/ValueCollections.cc src/ValueCollections.h
	  src/attributes.cc src/bitlog.cc src/breakpoints.h
	  src/comparator.h src/ctmu.h src/eeprom.h src/intcon.cc
	  src/intcon.h src/interface.cc src/pic-processor.h
	  src/processor.cc src/processor.h src/registers.cc
	  src/registers.h src/stimuli.cc src/stimuli.h src/ui.cc
	: Removed unnecessary use of #include <iostream> from headers.
	  This leads to some code bloat with GCC for units that do not need
	  iostream.

2015-11-28 Errol van de l'Isle <evandel@cix.co.uk>
	* doc/gpsim.lyx
	: Update documentation

2015-11-28 Errol van de l'Isle <evandel@cix.co.uk>
	* gui/gui_src.h gui/gui_src_opcode.cc
	: Major re-write of the opcode window. Simplefied the font handling,
	  removed broken options. Improved redraw speed and gave it a similar
	  look to the RAM & EPROM windows.

2015-11-19 Roy Rankin <rrankin@ihug.com.au>
	* cli/cmd_break.cc cli/cmd_break.h
	: undo fix for for bug 206
	* cli/parse.yy src/expr.cc
	: improve error processing and undo fix for bug 206
	* cli/scan.ll
	: Allow [dD]'nn' decimal values
	* doc/gpsim.lyx
	: Correct documentation errors
	* src/breakpoints.cc
	: new fix for bug 206

2015-11-17 Errol van de l'Isle <evandel@cix.co.uk>
	* src/ValueCollections.cc src/cmd_manager.cc src/errors.cc
	  src/os_dependent.cc src/processor.cc src/value.cc
	: Minor optimisations, found during static analysis of code
	* gui/gui_breadboard.cc gui/gui_breadboard.h
	: Removed trace buttons, added status line to show if the trace failed

2015-11-15 Errol van de l'Isle <evandel@cix.co.uk>
	* gui/gui_menu.cc gui/gui_src.h gui/gui_src_asm.cc
	: Fix memory leaks. Refactor source browser

2015-11-11 Errol van de l'Isle <evandel@cix.co.uk>
	* gui/gui.h gui/gui_scope.cc gui/gui_scope.h gui/gui_src.cc
	  gui/gui_src.h gui/gui_src_asm.cc gui/gui_src_opcode.cc
	: Simplified keyboard handling

2015-11-07 Roy Rankin <rrankin@ihug.com.au>
	* regression/p16f88x regression/p16f88x/Makefile
	  regression/p16f88x/comparator.asm regression/p16f88x/epwm.asm
	  regression/p16f88x/eusart.asm regression/p16f88x/i2c.asm
	  regression/p16f88x/i2c_low.inc regression/p16f88x/i2c_slave.asm
	  regression/p16f88x/p16f882.asm regression/p16f88x/p16f883.asm
	  regression/p16f88x/p16f886.asm regression/p16f88x/p16f887.asm
          regression/run_regression.sh regression/p16f88x/a2d.asm
	: Add p16f88x regressions test
	* regression/p1xf18xx/p12f1822.asm regression/p1xf18xx/p16f1823.asm
          src/p16f87x.cc src/p16f88x.cc
	* regression/tmr0_16bit/tmr0_16bit.asm
	: add nops after assert's
	* src/eeprom.cc
	: turn off debug
	* src/p18x.cc src/p1xf1xxx.cc src/pic-processor.cc src/pic-processor.h
	  src/ssp.cc src/ssp.h src/p16f88x.cc
	: Add SSP registers to 16f88x and consolidate sspmsk code

2015-11-02 Errol van de l'Isle <evandel@cix.co.uk>
	* gui/gui.h gui/gui_src.h gui/gui_src_asm.cc
	: Remove limit on number of source files. Removed unused and deprecated code.

2015-10-27 Errol van de l'Isle <evandel@cix.co.uk>
	* cli/socket.cc eXdbm/eXdbm.c
	: Fix resource & memory leaks found with static analysis.

2015-10-27 Errol van de l'Isle <evandel@cix.co.uk>
	* gui/gui.h gui/gui_menu.cc gui/gui_regwin.cc gui/gui_regwin.h
	  gui/gui_src_asm.cc gui/gui_statusbar.cc gui/gui_statusbar.h
	: Improve register status bar code & remove it from the RAM window
	  preparing to change the source window to be the main one

2015-10-25 Errol van de l'Isle <evandel@cix.co.uk>
	* gui/gui.h gui/gui_break.cc gui/gui_main.cc gui/gui_processor.cc
	  gui/gui_profile.cc gui/gui_profile.h gui/gui_register.h
	  gui/gui_regwin.cc gui/gui_regwin.h gui/gui_src_opcode.cc
	  gui/gui_statusbar.cc gui/gui_symbols.cc gui/gui_symbols.h
	  src/ValueCollections.h src/operator.h src/packages.h src/ui.h
	: Fix minor errors and remove dead code found with static analysis.

2015-10-24 Errol van de l'Isle <evandel@cix.co.uk>
	* gui/gui_menu.cc
	: Modified file selector to enable the selction of the processor for
	  .hex files

2015-10-22 Roy Rankin <rrankin@ihug.com.au>
	* src/16bit-registers.cc src/clock_phase.cc src/clock_phase.h
	  src/pic-processor.cc src/pic-registers.cc src/processor.h
	: Move clock phase variables into Processor class

2015-10-21 Roy Rankin <rrankin@ihug.com.au>
	* cli/cmd_clear.cc
	: fix sigsegv on improper input
	* gpsim/main.cc gui/gui.h gui/gui_breadboard.cc gui/gui_break.cc
	  gui/gui_main.cc gui/gui_menu.cc gui/gui_regwin.cc gui/gui_src.h
	  gui/gui_src_asm.cc gui/gui_src_opcode.cc gui/gui_statusbar.cc
	  gui/gui_watch.cc src/14bit-tmrs.cc src/14bit-tmrs.h src/16bit-processors.cc
	  src/comparator.cc src/expr.cc src/p18x.cc src/pic-instructions.cc
	  src/pic-registers.cc src/processor.cc src/processor.h src/value.cc
	  src/xref.cc src/xref.h
	: Fix memory leaks

2015-10-11 Roy Rankin <rrankin@ihug.com.au>
	* cli/cmd_break.cc
	: improve error message
	* cli/input.cc
	: add verbose output
	* gui/gui_breadboard.cc
	: trace nodes
	: gui/gui_src_asm.cc
	* cntl-F in src window when no code loaded causes sigsegv
        * src/cod.cc src/cod.h
	: improve error handling when opening code files
        * src/processor.cc src/processor.h
	: move m_ProgramMemoryAllocationSize into Processor class
	* src/breakpoints.cc src/expr.cc src/operator.cc
	: better handle error conditions
	* src/fopen-path.cc
	: handle invalid file names

2015-08-07 Errol van de l'Isle <evandel@cix.co.uk>
	* gui_menu.cc gui_profile.cc gui_src_asm.cc
	: Fixed error in gui_message(), resource not destroyed.
	  Re: patch from andi

2015-09-07 Roy Rankin <rrankin@ihug.com.au>
	* cli/cmd_break.cc cli/cmd_break.h cli/parse.yy src/breakpoints.cc
	: bug 206 	Break command problems

2015-09-07 Roy Rankin <rrankin@ihug.com.au>
	* doc/gpsim.html doc/gpsim.lyx
	: Update documentation

2015-09-04 Roy Rankin <rrankin@ihug.com.au>
	* configure.ac
	: Change release to 0.29.1
	* src/eeprom.cc src/p16f87x.cc src/p16f87x.h
	: bug 207 	Wrong EEPROM size (16f876/876a/877/877a)
	* src/tmr0.cc
	: bug 205 	TMR0: bug TMR0 is larger than 255

2015-08-17 Roy Rankin <rrankin@ihug.com.au>
	* configure.ac
	: Change release to 0.29.0
	* gui/gui_src.cc
	: Fix compiler warning
	* src/p18x.cc src/pic-ioports.cc src/ssp.cc
	: Remove debug output

2015-08-13 Roy Rankin <rrankin@ihug.com.au>
	* modules/ttl.cc src/14bit-registers.cc src/14bit-registers.h
	  src/14bit-tmrs.cc src/16bit-registers.cc src/16bit-tmrs.h
	  src/comparator.cc src/comparator.h src/ctmu.h src/i2c-ee.cc
	  src/ioports.cc src/p12x.cc src/p18x.cc src/pic-processor.cc
	  src/pic-processor.h src/ssp.cc src/uart.cc
	: Fix memory error reported by Valgrind

2015-08-07 Errol van de l'Isle <evandel@cix.co.uk>
	* modules/led.cc modules/led.h
	: bug 203 - led module looping

2015-08-03 Roy Rankin <rrankin@ihug.com.au>
	* modules/ttl.cc modules/ttl.h
	: bug 204 - tt595 Qs output lags by one SCK clock

2015-08-03 Roy Rankin <rrankin@ihug.com.au>
	* src/gpsim_time.cc src/gpsim_time.h
	: bug 202 - too many breaks

2015-07-29 Roy Rankin <rrankin@ihug.com.au>
	* extras/i2c2par/Makefile extras/i2c2par/examples/Makefile
	: remove from svn control
	* src/14bit-registers.cc
	: bug 201 - Nested CALL causes loop in p10f202

2015-07-26 Errol van de l'Isle <evandel@cix.co.uk>
	* gui/gui_src.cc gui/gui_src.h gui/gui_src_asm.cc
	: Feature 41
	  In the source browser the find dialog now has a keyboard shortcut
	  with improvments to the dialog. Improved keyboard keypress detection
	  as keyboard modifiers not correctly detected.

2015-07-27 Roy Rankin <rrankin@ihug.com.au>
	* configure.ac makefile.mingw extras/Makefile.am extras/i2c2par
	  extras/i2c2par/Makefile extras/i2c2par/Makefile.am
	  extras/i2c2par/examples extras/i2c2par/examples/Makefile
	  extras/i2c2par/examples/Makefile.am extras/i2c2par/examples/i2c2par.asm
	  extras/i2c2par/i2c2par.cc extras/i2c2par/i2c2par.h
	  extras/i2c2par/makefile.mingw extras/i2c2par/module_manager.cc
	: Feature 40 - Add support for 20x4 lcd module with I2C interface
	* extras/lcd/makefile.mingw extras/dht11/makefile.mingw
	  extras/ds1307/makefile.mingw extras/ds1820/makefile.mingw
	  extras/graphic_lcd/src/makefile.mingw
	: More Fixes for windows build

2015-07-27 Roy Rankin <rrankin@ihug.com.au>
	* gpsim/makefile.mingw modules/led.h modules/makefile.mingw
	  src/gpsim_interface.h src/makefile.mingw src/modules.h
	: Fixes for windows build

2015-07-26 Roy Rankin <rrankin@ihug.com.au>
	* doc/screenshots/breadboard_register.png
	  doc/screenshots/control_source.png
	: new screendump files
	* regression/a2d/10f222.lkr regression/ccp/16f819.lkr
	  regression/ccp/16f877a.lkr regression/ccp/18f6520.lkr
	  regression/comparator/10f204.lkr regression/comparator/16f628.lkr
	  regression/comparator/16f873a.lkr regression/comparator/16f877a.lkr
	  regression/comparator/16f882.lkr regression/tmr1_16bit/18f452.lkr
	  regression/ttl/18f452.lkr
	: Remove gputil link files
	* regression/run_regression.sh regression/tmr1_16bit/tmr1_18f2620.asm
	  regression/ttl/Makefile regression/ttl/ttl595.asm
	: add new regression tests

2015-07-26 Errol van de l'Isle <evandel@cix.co.uk>
	* configure.ac
	: Add option for leak testing (X86-64 gcc or clang only)
	*  extras/graphic_lcd/src/glcd.cc
	   extras/graphic_lcd/src/glcd.h
	   extras/graphic_lcd/src/glcd_100X32_sed1520.cc
	   extras/graphic_lcd/src/glcd_100X32_sed1520.h
	   extras/graphic_lcd/src/gpsim_modules.cc
	   extras/graphic_lcd/src/osram.cc
	   extras/graphic_lcd/src/osram.h
	   extras/graphic_lcd/src/sed1520.cc
	   extras/graphic_lcd/src/ssd0323.cc
	   extras/graphic_lcd/src/ssd0323.h
	: Do all drawing with Cairo instead of deprecated GDK.

2015-07-26 Roy Rankin <rrankin@ihug.com.au>
	* src/pic-processor.cc src/p18x.h src/p18x.cc
	  regression/a2d/Makefile regression/a2d/p18f26k22.asm
	  regression/ccp/Makefile regression/ccp/pwm_26k22.asm
	  regression/comparator/Makefile regression/comparator/compar_26k22.asm
	  regression/tmr1_16bit/Makefile regression/tmr1_16bit/tmr1_18f26k22.asm
	  regression/epwm/p18f26k22.asm regression/p18f26k22/Makefile
	  regression/p18f26k22/ctmu_26k22.asm regression/p18f26k22/tbl_26k22.asm
	  regression/p18f26k22/hlvd_26k22.asm
	: feature 46 - Add p18f26k22 Processor
	* gpsim/main.cc gui/gui_scope.cc gui/gui.h
	: fix scope error messages
	* cli/Makefile.am
	: fix continual rebuild of parse.cc
	* src/14bit-registers.cc src/14bit-registers.h
	: add CPSCON0::callback_print() function
	* src/16bit-processors.cc src/16bit-processors.h
	  src/16bit-registers.h src/16bit-registers.cc
	: Bug 200 - tblptrx registers miss named
	  Feature 45 -	P18 processors do not return devid
	  Add HLVDCON class
	* src/bit.cc : fix compiler warning
	* src/comparator.cc src/comparator.h src/ctmu.cc src/ctmu.h
	  src/Makefile.am src/a2d_v2.h src/a2d_v2.cc src/p16f88x.cc
	: Add ctmu class for p18f26k22
	* src/eeprom.h src/eeprom.cc
	: changes to integrate eeprom with TBL

2015-07-09 Roy Rankin <rrankin@ihug.com.au>
	* regression/a2d/16c71.lkr regression/a2d/16f819.lkr
          regression/a2d/16f871.lkr regression/a2d/16f873a.lkr
	  regression/a2d/16f874a.lkr regression/a2d/16f88.lkr
          regression/a2d/18f1220.lkr regression/a2d/18f4321.lkr
          regression/a2d/18f452.lkr regression/a2d/Makefile
	: Remove outdated gputil link files

2015-07-09 Roy Rankin <rrankin@ihug.com.au>
	* stimuli.h simuli.cc
	: Feature 44 Entering node name into cli should show attached stimului
	  Refine node RC voltage vs time calculation
	* stimuli.h simuli.cc src/processor.h src/processor.cc
	  src/modules.h src/modules.cc
	: Feature 43 	Allow setting of Vdd on processors
	* src/ioports.cc
	: feature 42 	Analog inputs should have about 5pF capacitance
	* src/p1xf1xxx.cc
	: Fix cpscon0 register name (was cpscon)
        * regression/a2d/p16c71.asm regression/p1xf18xx/p16f1823.asm
	  regression/switch_test/switch_test.asm regression/spi/p18f242.asm
	: adjust regression tests for above changes

2015-07-08 Errol van de l'Isle <evandel@cix.co.uk>
	* gui/gui.h gui/gui_scope.h gui/gui_scope.cc
	: Replace all deprecated GDK drawing with Cairo drawing and some code
	  clean up.

2015-06-25 Roy Rankin <rrankin@ihug.com.au>
	* gui/gui_watch.cc: initialize variable watch_list
	* regression/comparator/Makefile
	  regression/comparator/compar_2321.asm
	  regression/comparator/compar_628.asm
	  regression/comparator/compar_6520.asm
	  regression/comparator/compar_873a.asm
	  regression/comparator/compar_877a.asm
	  regression/comparator/compar_882.asm
	  regression/p16f684/Makefile
	  regression/p16f684/compar_684.asm
	  regression/p16f690/p16f690.asm
	  regression/p1xf18xx/Makefile
	  regression/p1xf18xx/p16f1823_comp.asm
	  regression/run_regression.sh
	: Improve comparator regression tests
	* regression/p1xf18xx/p16f1823_i2c.asm
	  regression/p1xf18xx/p16f1823_i2c_v2.asm
	  regression/p1xf18xx/p16f1823_spi.asm
	: fix variable names in asserts
	* src/14bit-registers.h
	: define aditional OSCCON and OSCTUNE bits
	* src/14bit-tmrs.cc src/14bit-tmrs.h
	: Allow timer classes to be used more than once
	* src/16bit-processors.cc src/16bit-processors.h
	: change t1con and t3con to pointers so they can be redefine if required

	* src/16bit-registers.cc src/16bit-registers.h
	: add OSCCON2 and OSCCON_HS classes
	* src/16bit-tmrs.cc src/16bit-tmrs.h
	: Timers 1,3,5
	* src/a2d_v2.cc src/a2d_v2.h src/a2dconverter.cc src/a2dconverter.h
	  src/p1xf1xxx.cc
	: improve inheratance structure
	* src/comparator.cc src/comparator.h src/p16f88x.cc src/p16f88x.h
	: restructure for up to 4 comparators
	* src/p16f62x.cc
	: Fix Bug 199 	p16f627,8 comparator error mode 3
	* src/p16x6x.cc
	: Allow multiple SSP modules to connect to tmr2
	* src/p18x.cc
	: Fix bug 198 - p18f6620 comparator pins wrong
	  Fix bug 197 	Bad comparator output pin on p18f2x21 based processors
	* src/p18x.h : fix 2620 register size
	* src/pic-ioports.cc src/pic-ioports.h
	: make IOCxF optional in  PicPortIOCRegister
	* src/pic-processor.cc src/pic-processor.h
	: allow for secondary oscillator
	* src/pir.cc src/pir.h
	: add support for PIR4, PIR5 registers
	* src/registers.cc
	: Fix register naming
	* src/ssp.cc src/ssp.h
	: Allow multiple SSP modules using flexable pir registers
	* src/stimuli.h
	: Increase input impedance
	* src/tmr0.h
	: make m_t1gcon useable by derrived classes

2015-05-31 Errol van de l'Isle <evandel@cix.co.uk>
	* gui/gui_scope.cc gui/gui_scope.h
	: Draw signal names using Cairo
	* gui/gui_menu.cc gui/gui_processor.cc gui/gui_profile.cc
	  gui/gui_profile.h gui/gui_regwin.cc gui/gui_regwin.h gui/gui_src.cc
	  gui/gui_src.h gui/gui_src_asm.cc gui/gui_src_opcode.cc
	  gui/gui_stack.cc gui/gui_statusbar.cc gui/gui_statusbar.h
	  gui/gui_stopwatch.cc gui/gui_stopwatch.h gui/gui_symbols.cc
	  gui/gui_symbols.h gui/gui_trace.cc gui/gui_trace.h
	  gui/preferences.cc gui/settings_exdbm.cc
	  modules/encoder.cc modules/encoder.h modules/gpsim_modules.cc
	  modules/i2c-eeprom.cc modules/i2c-eeprom.h modules/i2c.cc
	  modules/i2c2par.cc modules/i2c2par.h modules/led.cc modules/led.h
	  modules/logic.cc modules/logic.h modules/push_button.cc
	  modules/push_button.h modules/resistor.cc modules/stimuli.cc
	  modules/stimuli.h modules/switch.cc modules/switch.h
	  modules/ttl.cc modules/ttl.h modules/usart.cc modules/video.cc
	  modules/video.h
	: Used clang tool "iwyu" to help tidy up which headers are included

2015-05-27 Errol van de l'Isle <evandel@cix.co.uk>
	* gui/gui_main.cc
	: Fix display update from error introduced in svn 2323
	* gui/gui_scope.cc gui/gui_scope.cc
	: Cleaned up code to prepare for removing GDK deprecated calls
	* gui/gui.h gui_break.cc gui_regwin.cc
	: Change CrossReferenceToGUI class to a pure calls

2015-05-23 Errol van de l'Isle <evandel@cix.co.uk>
	* gui/gui_init.cc
	: Removed header dependencies and marked as should be removed
	* gui/gui_main.cc
	: Removed threading code, this style of threading is deprecated in
	  GTK+ v3.6 and does not work under MS Windows.
	* gui/gui.h gui/gui_breadboard.cc gui/gui_object.cc gui/gui_object.h
	  gui/gui_profile.cc gui/gui_regwin.cc gui/gui_regwin.h
	  gui/gui_scope.cc gui/gui_src.cc gui/gui_src_asm.cc
	  gui/gui_src_opcode.cc gui/gui_stack.cc gui/gui_stopwatch.cc
	  gui/gui_symbols.cc gui/gui_trace.cc gui/gui_watch.cc
	: Change GUI_Object to an abstract type, error checking now at
	  compile time not just run time. Removed un-used variable "wt"
	  and partially used variable "wc" from GUI_Object.

2015-05-13 Errol van de l'Isle <evandel@cix.co.uk>
	* gui/gui_breadboard.cc
	: Fixed regression. Now correcly shows the alternative pin name

2015-05-07 Errol van de l'Isle <evandel@cix.co.uk>
	* extras/lcd/Makefile.am extras/lcd/hd44780.cc extras/lcd/hd44780.h
	  extras/lcd/lcd.cc extras/lcd/lcd.h extras/lcd/lcdgui.cc
	  extras/lcd/module_manager.cc gui/gui_breadboard.cc
	: Do drawing in the LCD module with Cairo. Clean up resource mangement

2015-04-26 Errol van de l'Isle <evandel@cix.co.uk>
	* gui/gui_beradboard.cc
	: Correct crash introduced in svn 2319

2015-04-25 Errol van de l'Isle <evandel@cix.co.uk>
	* gui/gui_breadboard.h gui/gui_breadboard.cc
	: All drawing now done with Cairo. Fix memory leak, some code tidy up

2015-04-13 Roy Rankin <rrankin@ihug.com.au>
	* src/14bit-tmrs.cc
	: Fix bug # 196 - PWM glitch when writing to CCPCON

2015-04-11 Errol van de l'Isle <evandel@cix.co.uk>
	* gui/gui_breadboard.cc gui/gui_breadboard.h
	: Traces are now drawn using Cairo instead of deprecated GDK calls

2015-04-10 Roy Rankin <rrankin@ihug.com.au>
	* doc/gpsim.lyx modules/Makefile.am modules/gpsim_modules.cc
	  modules/i2c2par.cc modules/i2c2par.h
	: add I2C to 8 bit bus modules for feature request # 40
	* src/i2c-ee.cc src/i2c-ee.h
	: rewrite to make I2C slave code sharable via class i2c_slave

2015-04-04 Errol van de l'Isle <evandel@cix.co.uk>
	* gui/gui_breadboard.cc gui/gui_breadboard.h
	: Replace deprecated GDK calls for displaying module name

2015-03-29 Roy Rankin <rrankin@ihug.com.au>
	* gui/gui_breadboard.c
	: Fix core dump when "Trace all" button used in Breadboard,
	  regression from svn 2309

2015-03-27 Errol van de l'Isle <evandel@cix.co.uk>
	* modules/led.cc modules/led.h modules/logic.cc modules/logic.h
	  modules/video.cc modules/video.h
	: Replace deprecated GDK calls and code clean up

2015-03-27 Roy Rankin <rrankin@ihug.com.au>
	* regression/p16f676/reset.asm regression/p16f684/reset.asm
	  regression/p16f84/reset.asm src/14bit-registers.cc src/intcon.cc
	  src/intcon.h src/pic-ioports.cc src/pic-ioports.h
	: Bug 195 - Writing to an IOC IO port should not clear interrupt flag

2015-03-23 Roy Rankin <rrankin@ihug.com.au>
	* gui/gui_watch.cc: fix gtk_tree_model_foreach assert
	* src/14bit-tmrs.cc: fix debug print format warning

2015-03-21 Errol van de l'Isle <evandel@cix.co.uk>
	* gui/gui.h gui/gui_breadboard.cc gui/gui_breadboard.h
	  gui/gui_main.cc gui/gui_profile.cc  gui/gui_regwin.cc
	  gui/gui_regwin.h gui/gui_src_asm.cc
	: Replace some deprecated GDK calls and code clean up

2015-03-14 Errol van de l'Isle <evandel@cix.co.uk>
	* gui/gui_watch.cc gui/watch.h
	: Replace the GtkCList with GtkListStore/GtkTreeView
	* extras/graphic_lcd/src/glcd_100x32_sed1520.cc
	  extras/graphic_lcd/src/osram.cc extras/lcd/lcdgui.cc
	  gui/gui.h gui/gui_breadboard.cc gui/gui_regwin.cc
	  gui/gui_scope.cc gui/gui_src_asm.cc gui/gui_src_opcode.cc
	  gui/gui_statusbar.cc gui/gui_stopwatch.cc gui/gui_trace.cc
	  modules/led.cc modules/logic.cc
	: Replaced various small deprecated GTK calls.

2015-03-08 Errol van de l'Isle <evandel@cix.co.uk>
	* gui/gui_profile.cc gui/gui_profile.h
	: Remove unused global style, replaced all GtkCList with
	  GtkListStore/GtkTreeView and removed the need for some GLists
	* gui/gui_src.h gui/gui_src_asm.cc
	: Removed classes BreakPointInfo, BreakPointList,
	  SourceBrowserAsm_Window which are not used and replaced other
	  deprecated code.
	* gui/gui.h gui/gui_break.cc gui/gui_regwin.cc gui/gui_src.cc
	  gui/gui_stack.cc gui_symbols.cc
	: Replaced deprecated GTK+ calls

2015-02-28 Errol van de l'Isle <evandel@cix.co.uk>
	* gui/gui_src.h gui_src_asm.cc
	: Correct usage of signal "switch-page"
	* gui/gui_watch.cc gui/gui_watch.h
	: Replaced GList with std::vector<>
	* modules/usart.cc modules/usart.h
	: Removed definition of GTK_ENABLE_BROKEN
	* gui/gui_statusbar.cc gui/gui_statusbar.h gui/gui.h
	: Removed commented out dead code and code tidy up
	* gui/gui_processor.cc gui_processor.h gui_menu.cc
	: Remove conditional on NEW_SOURCE_BROWSER and code tidy.
	* gui/breadboard.cc
	: Made two globals variables local and used C++ style allocations not C
	  Convert two GList to a std::vector<>

2015-02-23 Roy Rankin <rrankin@ihug.com.au>
	* src/tmr0.cc src/16bit-registers.cc
	: Bug 194 - P18 processor TMR0 may ignore TMR0H
	* src/p18x.cc src/p18x.h src/pic-processor.cc src/pic-processor.h
	: Feature 39 - Add p18f2620 processor (work in progress)
	* extras/lcd/examples/icons.inc
	  extras/lcd/examples/lcd.inc
	  extras/lcd/examples/lcd_mod.asm
	  extras/lcd/examples/lcd_mod.stc
	  extras/lcd/examples/lcd_mod20x4.stc
	  extras/lcd/examples/screen.asm
	  extras/lcd/hd44780.cc
	  extras/lcd/hd44780.h
	  extras/lcd/lcd.cc
	  extras/lcd/lcd.h
	  extras/lcd/lcdfont.h
	  extras/lcd/lcdgui.cc
	  extras/lcd/module_manager.cc
	: Add 20x4 lCD display and CGRam support as 1st step for feature
	  request 40 - 20x4 LCD with I2C interface

2015-02-21 Errol van de l'Isle <evandel@cix.co.uk>
	* extras/graphic_lcd/src/glcd.cc
	  extras/graphic_lcd/src/glcd_100x32_sed1520.cc
	  extras/graphic_lcd_src/osram.cc
	  extras/lcd/lcdgui.cc
	  gui/gui_main.cc gui/gui_profile.cc gui/gui_regwin.cc gui/gui_scope.cc
	  gui/gui_src.cc gui/gui_src_asm.cc gui/gui_watch.cc
	  modules/led.cc modules/logic.cc modules/video.cc
	: Number of minor changes to use GTK accessor functions to avoid direct
	  access to GTK internals. Gpsim now compiles with -DGSEAL_ENABLE


2015-02-13 Roy Rankin <rrankin@ihug.com.au>
	* src/14bit-registers.cc
	: Bug 192 - Linear Address Calculation Bug on Enhanced Midrange
	* src/gpsim_time.cc
	: Bug 193 - Crash when simulation mode set to "update gui every cycle"
	* src/14bit-tmrs.cc src/14bit-tmrs.h src/gpsim_interface.h
	  src/interface.cc src/tmr0.cc src/tmr0.h
	: Feature 38 - Update timer register values in GUI

2015-02-10 Errol van de l'Isle <evandel@cix.co.uk>
	* gui/gui_src.h gui/gui_src_opcode.cc
	: Replace usage of GtkCList. Due to styles being done differently on a
	  GtkTreeView I have now used icons instead of colours to indicate
	  break points and the current program counter. This should help those
	  with colour blindness. Replaced various deprecated API calls and
	  other code tidy ups. Now compiles with -DGSEAL.

2015-02-05 Roy Rankin <rrankin@ihug.com.au>
	* src/14bit-registers.cc src/14bit-processors.cc src/14bit-processors.h
	  src/pic-processor.h
	: Bug 190 - Enhanced processors not setting HFIOFS bit of OSCSTAT
	  Bug 191 - Enhanced midrange chips reset from software enabled watchdog
	  while sleeping
	* regression/p1xf18xx/p16f1823.asm
	: test setting HFIOFS bit of OSCSTAT
	* src/14bit-registers.cc
	* regression/run_regression.sh regression/wdt/16f1823.lkr
	  regression/wdt/Makefile regression/wdt/nwdt_16f1823.asm
	  regression/wdt/pwdt_16f1823.asm
	: Add 16f1823 WDT regression tests
	* src/p1xf1xxx.cc: Delete option_reg in destructor

2015-01-17 Errol van de l'Isle <evandel@cix.co.uk>
	* gui/gui_src_asm.cc gui/gui_src.h
	: Remove usage of GtkPixmap. Modified to compile with -DGSEAL_ENABLE.
	  Various code tidy ups, removed some dead code. Modified the find and
	  font dialogs.

2015-01-17 Errol van de l'Isle <evandel@cix.co.uk>
	* gui/gui_symbols.cc, gui/gui_symbols.h
	: Replace GtkCList with tree view

2015-01-06 Errol van de l'Isle <evandel@cix.co.uk>
	* gui/gui_breadboard.cc, gui/gui_breadboard.h
	: Removed unused GtkCList, removed some dead code, modified to
	  compile with -DGSEAL_ENABLE. Some code tidy up using checks from
	  cppcheck.

2014-12-28 Errol van de l'Isle <evandel@cix.co.uk>
	* gui/gui_stopwatch.cc, gui/gui_stopwatch.h
	: Replaced GtkOptionMenu with GTK 2 equivalent. Various code clean up.
	  Required GTK version now 2.24

2014-12-27 Errol van de l'Isle <evandel@cix.co.uk>
	* gui/gui_breadboard.cc, gui/gui_breadboard.h, gui/gui_src_asm.cc
	: Clean up last usage of GtkSignalFunc
	* gui/gui_trace.cc, gui/gui_trace.h
	: Replace GtkClist with tree view

2014-12-25 Errol van de l'Isle <evandel@cix.co.uk>
	* gui/gui_dialog.cc, gui/gui_scope.cc : Dead code removal

2014-12-25 Errol van de l'Isle <evandel@cix.co.uk>
	* gui/gui.h, gui/gui_breadboard.cc, gui/gui_breadboard.h,
	  gui/gui_menu.cc, gui/gui_object.cc, gui/gui_object.h,
	  gui/gui_profile.cc, gui/gui_profile.h, gui/gui_regwin.cc,
	  gui/gui_regwin.h, gui/gui_scope.cc, gui/gui_scope.h,
	  gui/gui_src.h, gui/gui_src_asm.cc, gui/gui_src_opcode.cc,
	  gui/gui_stack.cc, gui/gui_stack.h, gui/gui_stopwatch.cc,
	  gui/gui_stopwatch.h, gui/gui_symbols.cc, gui/gui_symbols.h,
	  gui/gui_trace.cc, gui/gui_trace.h, gui/gui_watch.cc,
	  gui/gui_watch.h
	: Replaced menus with GtkUIManager, replaced about dialog and done
	  code tidy up to gui/gui_menu.cc and gui/gui_object.cc. Required
	  GTK version now 2.18

2014-12-15 Errol van de l'Isle <evandel@cix.co.uk>
	* modules/logic.cc, gui/gui_dialog.cc, gui/gui_regwin.h,
	  gui/gui_menu.cc, gui/gui_breadboard.h, gui/gui_src.h,
	  gui/gui_breadboard.cc, gui/gui_trace.cc, gui/gui_main.cc,
	  gui/gui_statusbar.cc, gui/gui_regwin.cc, gui/gui_src_asm.cc,
	  gui/gui.h, gui/gui_profile.cc,
	  gui/gui_src_opcode.cc: Remove conditional GTK 1 code
	* gui/gui_menu.cc, gui/breadboard.cc, gui/gui_regwin.cc, configure.ac:
	- Replace GtkFileSelector with GtkFileChooserDialog and add checks
	  for GTK v2.8 or above

2014-12-10 Roy Rankin <rrankin@ihug.com.au>
	* gui/gui_stack.cc gui/gui_stack.h: Replace GtkCList with GtkTreeView
	  patch #44

2014-12-02 Roy Rankin <rrankin@ihug.com.au>
	* extras/graphic_lcd/src/glcd_100X32_sed1520.cc
	  extras/graphic_lcd/src/osram.cc extras/lcd/lcdgui.cc
	  gui/gui_breadboard.cc gui/gui_dialog.cc gui/gui_menu.cc
	  gui/gui_profile.cc gui/gui_regwin.cc gui/gui_scope.cc gui/gui_src.cc
	  gui/gui_src_asm.cc gui/gui_src_opcode.cc gui/gui_stack.cc
	  gui/gui_statusbar.cc gui/gui_stopwatch.cc gui/gui_symbols.cc
	  gui/gui_trace.cc gui/gui_watch.cc modules/encoder.cc modules/led.cc
	  modules/logic.cc modules/push_button.cc modules/resistor.cc
	  modules/switch.cc modules/usart.cc modules/video.cc:
	- Replace gtk_signal() functions with g_signal() equivalents - patch #43

2014-11-22 Roy Rankin <rrankin@ihug.com.au>
	* INSTALL.gpsim doc/gpsim_svn.html: Revise install documentation
	* src/14bit-processors.cc src/14bit-processors.h src/p1xf1xxx.cc
	  src/pic-registers.cc src/pic-registers.h: Watchdog fixes for the
	  14bit enhanced cores - patch 41
	* src/trace.cc src/trace.h: Trace dump for a large cycle counter -
	  patch 42

2014-11-19 Roy Rankin <rrankin@ihug.com.au>
	* autogen.sh doc/gpsim_svn.html: add script to build configure command
	* doc/metadata/gpsim.png: Use icon from website
	* regression/analog_stim/p12f1822.asm: terminate if .sig files missing
	* src/sim_context.cc: fix ^c sigsegv if no file loaded - patches #39

2014-11-16 Roy Rankin <rrankin@ihug.com.au>
	* doc/Makefile.am doc/metadata/gpsim.appdata.xml:
	- Add metadata - Feature Request # 36
	* extras/graphic_lcd/examples/sed1520/glcd_test.asm
	  extras/graphic_lcd/examples/ssd0323/glcd_test.asm:
	- Replace __CONFIG to assemble with current gputils
	* modules/stimuli.cc regression/Makefile.am:
	- fix infinite loop bug # 188

2014-11-13 Roy Rankin <rrankin@ihug.com.au>
	* configure.ac: Set version to 0.28.90 for development
	* doc/Makefile.am doc/metadata/gpsim.appdata.xml
	 doc/metadata/gpsim.desktop doc/metadata/gpsim.png
	 doc/screenshots/control.png:
	- Add metadata files for distributions such a fedora

2014-11-06 Roy Rankin <rrankin@ihug.com.au>
	* configure.ac: Set version to 0.28.0

2014-11-05 Roy Rankin <rrankin@ihug.com.au>
	* doc/gpsim.lyx: Add missing documentation for modules in extras
	* modules/usart.cc: Adjust bit timing to Tch on each bit - Patch #40
	* src/14bit-registers.cc: Fix OSCCAL::put use of base_frequency -
	  Patch #40
	* src/clock_phase.h src/pic-processor.cc src/pic-registers.cc:
	- Remove unused phaseExecuteInterrupt class - Patch #40

2014-11-03 Roy Rankin <rrankin@ihug.com.au>
	* cli/cmd_quit.cc: q short command for quit - Feature Request 35
	* gui/gui_breadboard.cc: fix coredump bug #187
	* regression/interrupts_14bit/Makefile
	  regression/interrupts_14bit/int_sleep.asm
	  regression/p16f676/reset.asm regression/p16f684/reset.asm
	  src/pic-processor.cc: fix sleep interrupt, revisit patch #19
	* src/14bit-processors.cc: Remove dead code
	* src/pic-ioports.cc: Fix i/o pin wakeup for 16f84A bug #186
	* src/stimuli.cc: fix start of asynchronous_stimulus bug #185

2014-10-30 Roy Rankin <rrankin@ihug.com.au>
	* Makefile.am configure.ac doc/Makefile.am examples/12bit/Makefile.am
	  examples/16bit/Makefile.am examples/Makefile.am
	  examples/modules/Makefile.am examples/modules/usart_test/Makefile
	  extras/graphic_lcd/Makefile.am extras/lcd/Makefile.am
	  extras/lcd/examples/Makefile.am: add files to dist tarball required
	  for mingw compile
	* plat/win32/gpsim.nsi plat/win32/makefile.mingw:
	- mingw compile for windows and linux
	* cli/makefile.mingw: cmd_stopwatch.o not used in distributon

2014-10-26 Roy Rankin <rrankin@ihug.com.au>
	* extras/dht11/makefile.mingw: cleanup windows build
        * plat/win32/make.mingw: set compiler for fedora 21 mingw
	* gui/gui_regwin.cc: remove disabled code, do not delete invalid
	  register instances on class destructor
	* gui/gui_src.h gui/gui_src_asm.cc: rename SourcePage array from pages
	  to Srcpages to avoid confusuion with NSourcePage pointer called pages
	* src/modules.cc src/pic-processor.cc src/trace.cc:
	- better cleanup on  class removal
	* src/value.cc src/value.h src/xref.cc src/registers.cc
	  src/pic-registers.cc:
	- make _xref found in class value a pointer

2014-10-05 Roy Rankin <rrankin@ihug.com.au>
	* extras/dht11/Makefile.am extras/dht11/examples/Makefile.am:
	- include files in distribution tar ball
	* extras/dht11/makefile.mingw extras/ds1307/makefile.mingw
	  extras/ds1820/makefile.mingw extras/graphic_lcd/src/makefile.mingw
	  extras/lcd/makefile.mingw:
	-  compiler determined from plat/win32/make.mingw
	* makefile.mingw plat/win32/gpsim.nsi:
	- Add new extra devices
	* modules/Makefile.am: add missing attribute file
	* plat/win32/uxtime.h: fix struct class in linux X compile
	* src/makefile.mingw: fix file name change

2014-10-03 Roy Rankin <rrankin@ihug.com.au>
	* examples/modules/usart_test/usart_test.asm
	  regression/usart_test/Makefile regression/usart_test/eusart.asm
	  regression/usart_test/eusart_2455.asm
	  regression/usart_test/usart_pir1v1.asm
	  regression/usart_test/usart_pir1v2.asm: Fix uart regression tests
	* src/uart.cc src/uart.h: Fix timing of UART TXIF bit - bug #178

2014-10-01 Roy Rankin <rrankin@ihug.com.au>
	* cli/input.cc: give error message if opening .asm file - bug #183
	* regression/p18f/extended_instructions.asm
	  src/16bit-instructions.cc: P18F: Fix interaction of
	  POSTINC/POSTDEC and SUBFSR/ADDFSR - patch 37

2014-09-26 Roy Rankin <rrankin@ihug.com.au>
	* modules/module_attribute.h: fix regression from svn 2273

2014-09-26 Roy Rankin <rrankin@ihug.com.au>
	* src/p18x.h: fix last_actual_register - patch 36

2014-09-23 Roy Rankin <rrankin@ihug.com.au>
	* modules/gpsim_modules.cc modules/stimuli.cc modules/stimuli.h:
	- add the file recorder and file stimulus modules
	* modules/ttl.cc src/stimuli.cc src/stimuli.h: In analogue stimulus
	  module drive pin as voltage
	* regression/analog_stim/12f1822.lkr regression/analog_stim/Makefile
	  regression/analog_stim/p12f1822.asm
	  regression/analog_stim/stim_an.sig
	  regression/analog_stim/stim_clk.sig:
	- Regression tests for for the analogue stimulus.

2014-09-22 Roy Rankin <rrankin@ihug.com.au>
	* gui/gui_menu.cc gui/gui_regwin.cc: Remove debugging printf
	* gui/gui_src_asm.cc src/cod.cc src/cod.h src/processor.cc:
	- Handle missing source file BUG # 135
	* src/os_dependent.cc: Terminate path string for current folder

2014-09-17 Roy Rankin <rrankin@ihug.com.au>
	* configure.ac extras/Makefile.am extras/dht11/AUTHORS
	  extras/dht11/Makefile.am extras/dht11/README extras/dht11/dht11.cc
	  extras/dht11/dht11.h extras/dht11/examples
	  extras/dht11/examples/16f627_g.lkr
	  extras/dht11/examples/Makefile.am extras/dht11/examples/README
	  extras/dht11/examples/dht11_example.asm
	  extras/dht11/module_manager.cc: Add dht11 module - feature # 34

2014-09-16 Roy Rankin <rrankin@ihug.com.au>
	* src/14bit-instructions.cc src/16bit-instructions.cc
	  src/14bit-processors.cc src/16bit-processors.cc:
	- Allow clearing INTCON:GIE in interrupt - bug #179

	* src/14bit-registers.cc src/14bit-registers.h
	  src/intcon.cc src/intcon.h src/p1xf1xxx.cc
	  src/p1xf1xxx.h src/pic-ioports.h:
	- Fix INTCON:IOCIF IOCxF interaction - bug #180

	* regression/instructions_14bit/branching.asm
	  regression/p1xf18xx/Makefile
	  regression/p1xf18xx/p12f1822.asm
	  regression/p1xf18xx/p16f1788.asm
	  regression/p1xf18xx/p16f1823.asm:
	- Fix tests for bug #180

2014-08-23 Roy Rankin <rrankin@ihug.com.au>
	* regression/run_regression.sh regression/tmr3_16bit
	  regression/tmr3_16bit/18f452.lkr regression/tmr3_16bit/18f4550_g.lkr
	  regression/tmr3_16bit/Makefile regression/tmr3_16bit/tmr3_16bit.asm
	  regression/tmr3_16bit/tmr3_18f4550.asm: TMR3 regression test
	* src/14bit-tmrs.cc src/16bit-processors.cc
	  src/16bit-processors.h src/16bit-registers.cc src/16bit-registers.h
	  src/p18x.cc src/p18x.h src/pir.h: fix TMR3 bug #176

2014-08-07 Roy Rankin <rrankin@ihug.com.au>
	* regression/p1xf18xx/Makefile: add rule for p12f1822_usart.cod
	* regression/p1xf18xx/p16f1788.asm: tests for p16f1788 DAC and A/D
	* src/a2d_v2.cc: Fix comment
	* src/a2dconverter.cc src/a2dconverter.h: DAC and differential A/D
	* src/p1xf1xxx.cc src/p1xf1xxx.h: add DAC and A/D registers
	* src/ssp.cc: Remove debug printf statement

2014-07-31 Roy Rankin <rrankin@ihug.com.au>
	* regression/p1xf18xx/p12f1822.asm src/14bit-instructions.cc:
	- p12f182x: MOVIW must update Z bit - bug #175
	* src/pic-ioports.cc: IOC only works on gpio0 of p12f675 - bug #174
	* src/a2dconverter.cc src/p1xf1xxx.cc src/p1xf1xxx.h:
	- further work on p16f1788

2014-07-28 Roy Rankin <rrankin@ihug.com.au>
	* regression/p1xf18xx/Makefile: generate p16f1788.cod file
	* regression/p1xf18xx/p16f1823.asm: test writable PIR and PIE bits
	* src/p12f6xx.cc src/pir.h: revisit bug 171 patch
	* src/p1xf1xxx.cc: Set PIR2 C2IF bit writable for 16f1823 bug #172
	* src/pie.cc: use associated PIR register valid_bits mask for PIE
	- bug # 173

2014-07-27 Roy Rankin <rrankin@ihug.com.au>
	* regression/p12f675/p12f683.asm src/p12f6xx.cc src/pir.h:
	- Fix tmr2 interrupt on 12F683 - bug #171

2014-07-21 Roy Rankin <rrankin@ihug.com.au>
	* gui/gui_stopwatch.cc: replace obsolete gtk_object_get_data function
	* regression/p1xf18xx/Makefile regression/p1xf18xx/p12f1822_usart.asm
	  regression/run_regressionj.sh: Add 12f1822 usart regression test
	* src/p1xf1xxx.cc src/p1xf1xxx.h src/Makefile.am:
	- rename of files src/p12f182x.cc and src/p12f182x.h
	- Fix PIR1 part of bug #170
	- Fix weak pull-up on 12f1822 RA3 bug #169
	* src/14bit-processors.cc src/14bit-processors.h:
	- fix mcrl pin on extended processors
	* src/a2dconverter.cc: allow for no adcon1 register
	* src/p16f87x.cc: Delete all 16f877 registers
	* src/p16x6x.cc: remove unneeded output of class close
	* src/pic-processor.cc: add 16f1788 processor (not complete)
	* src/uart.cc: Fix apfcon pin switching part of bug #170

2014-07-10 Roy Rankin <rrankin@ihug.com.au>
	* modules/stimuli.cc: Fix compile error on FreeBSD - bug #160
	* regression/p1xf18xx/Makefile: Fix regression test issue - patch #35
	* gui/gui_menu.cc gui/gui_regwin.cc gui/gui_regwin.h gui/gui_scope.cc
	  gui/gui_scope.h gui/gui_src.h gui/gui_src_asm.cc src/breakpoints.cc
	  src/breakpoints.h src/cod.cc src/pic-processor.h:
	- Fix useless tests on unsigned int variables (FreeBSD warnings)

2014-07-01 Roy Rankin <rrankin@ihug.com.au>
	* regression/p1xf18xx/16f1788_g.lkr: add to svn

2014-05-17 Roy Rankin <rrankin@ihug.com.au>
	* regression/p1xf18xx/p12f1822.asm src/14bit-hexdecode.cc
	  src/14bit-instructions.cc src/14bit-instructions.h:
	- fix ADDFSR instruction bug 161 from Tim Burke

2014-05-17 Roy Rankin <rrankin@ihug.com.au>
	* gui/gui_breadboard.cc gui/gui_breadboard.h:
	- Replace CList with GtkTreeView (patch 30 with rework)
	* src/ValueCollections.h: fix throw - bug 159
	* src/p18x.cc src/p18x.h src/pic-processor.cc src/pic-processor.h:
	- add p18f2550, p18f4550 without USB support, remove PSP from p18f2520
	* src/Makefile.am src/makefile.mingw src/pir.cc src/pir.h
	  src/spp.cc src/spp.h: add streaming parallel port to p18f4455
	  p18f4550 (without USB functionality)

2014-05-09 Roy Rankin <rrankin@ihug.com.au>
	* modules/usart.cc: Correct baud rate after CPU frequency change
	  Bug 167
	* src/14bit-registers.cc: change OSCCON base frequency from
	  31.25 to 31 KHz
	* src/p16f88x.cc src/16bit-processors.cc src/p18x.cc src/p18x.h:
	- Fix default value of OSCCON - Bug 166
	* src/p12x.cc src/p12x.h src/pic-processor.cc src/pic-processor.h:
	- Add 16F505 - patch 31
	* regression/usart_test/Makefile: Fix make all
	* regression/usart_test/eusart_2455.asm: Test intrc frequency
	* regression/a2d/p18f1220.asm: Fix initial CPU frequency test
	* regression/p16f690/p16f690.asm: change for 8MHz INTRC

2014-04-14 Roy Rankin <rrankin@ihug.com.au>
	* cli/cmd_processor.cc: print unfound processor name
	* gpsim/main.cc: Fix issues with command line arguments - bug 165

2014-01-10 Roy Rankin <rrankin@ihug.com.au>
	* extras/ds1820/examples/Makefile.am: remove gpasm dependency from
	  build
	* extras/ds1820/examples/README: modify instructions for above change

2014-01-06 Roy Rankin <rrankin@ihug.com.au>
	* src/p16f87x.cc: Added missing GP registers for p16f877 (bug #164)
	* gpsim/main.cc: Fix regression causing core dump from 13-10-28 change

2013-10-28 Borut Razem <borutr@users.sourceforge.net>
	* gpsim/main.cc: display --version and --usage text before other texts

2013-10-27 Borut Razem <borutr@users.sourceforge.net>
	* gpsim/main.cc, gpsim/makefile.mingw: fixed mingw ompilation

2013-10-26 Borut Razem <borutr@users.sourceforge.net>
	* gpsim/main.h.in: added to source control

2013-10-22 Borut Razem <borutr@users.sourceforge.net>
	* gpsim/main.cc, gpsim/Makefile.am, set_cl_revision.sh:
	  fixed mess with --help and --version commnd line options,
	  show svn revision number in --version

2013-10-16 Borut Razem <borutr@users.sourceforge.net>
	* ChangeLog: added svn Revision stamp at the end of file

2013-10-15 Borut Razem <borutr@users.sourceforge.net>
	* modules/stimuli.cc, modules/stimuli.h, modules/switch.h,
	  modules/switch.cc, gui/gui_stopwatch.cc: applied patch
	  #32 Make gpsim compile with clang,
	  thanks to Ralf Horstmann

2013-09-20 Borut Razem <borutr@users.sourceforge.net>
	* regression/rt.sh: applied patch
	  #34 Allow overwriting make in regression tests,
	  thanks to Ralf Horstmann
	* extras/ds1820/examples/Makefile.am: applied patch
	  #33 Make gpsim buildable with BSD make,
	  thanks to Ralf Horstmann

2013-09-07 Roy Rankin <rrankin@ihug.com.au>
	* regression/spi/p16f88.asm: Test SS operation
	* src/ssp.cc: Fix SS bug #158, Display pin function labels

2013-09-03 Roy Rankin <rrankin@ihug.com.au>
	* configure.ac: Development version 0.27.90

2013-09-02 Roy Rankin <rrankin@ihug.com.au>
	* configure.ac: Version 0.27.0
	* ANNOUNCE: 0.27.0 release highlights

2013-08-18 Roy Rankin <rrankin@ihug.com.au>
	* COPYING: Current GPL license file
	* configure.ac: Version 0.27.rc1
	* gui/gui_regwin.cc: Fix sigsegv when using gtkextra-3

2013-08-16 Borut Razem <borutr@users.sourceforge.net>
	* doc/doc/gpsimWin32.html: updated libraries, links, ...
	* Makefile.am: removed plat/win32/Install.vcproj from EXTRA_DIST
	* plat/win32/gpsim.nsi: added missing DLLs
 	* gpsim/gpsim.vcxproj, src/src.vcxproj: fixed pthreads library path

2013-08-14 Borut Razem <borutr@users.sourceforge.net>
	* cli/cli.vcxproj, eXdbm/eXdbm.vcxproj, gpsim/gpsim.vcxproj,
	  gui/gui.vcxproj, modules/modules.vcxproj, plat/win32/Install.vcxproj,
	  src/src.vcxproj, gpsim.sln: Visual Studio upgraded to Visual Studio 2010,
	  libraries upgraded (MSVC build)

2013-08-13 Borut Razem <borutr@users.sourceforge.net>
	* cli/makefile.mingw, extras/ds1307/makefile.mingw,
	  extras/graphic_lcd/src/makefile.mingw, extras/lcd/makefile.mingw,
	  gpsim/makefile.mingw, gui/makefile.mingw, makefile.mingw,
	  modules/makefile.mingw, plat/win32/make.mingw, plat/win32/gpsim.nsi:
	  libraries upgraded (mingw build)

2013-08-10 Roy Rankin <rrankin@ihug.com.au>
	* gui/gui_breadboard.cc gui/gui_profile.cc gui/gui_src_opcode.cc
	  gui/gui_stack.cc gui/gui_symbols.cc gui/gui_trace.cc
	  gui/gui_watch.cc:
	- Fix CList GTK assert in Fedora 19 when using Adwaita theme

2013-08-07 Roy Rankin <rrankin@ihug.com.au>
	* regression/p1xf18xx/p12f1822.asm:
	- Add test to detect bad pcon, and fix trisa test
	* src/14bit-processors.cc:
	- set pcon to correct inital value on 14bit_e_processors
	* src/16bit-processors.cc: remove debug printout
	* src/processor.cc src/registers.cc: delete replaced registers

2013-08-06 Borut Razem <borutr@users.sourceforge.net>
	* gpsim/main.cc: don't free returned popt values on _WIN32 since they
	  reside in dll heap which is different from the main heap.
	* plat/win32/libgpsim.def: MSVC sync
	* extras/ds1307/makefile.mingw, extras/ds1820/makefile.mingw,
	  extras/graphic_lcd/src/makefile.mingw, extras/lcd/makefile.mingw,
	  plat/win32/make.mingw:
	  adapted for Mingw GCC 4.7.3

2013-08-03 Roy Rankin <rrankin@ihug.com.au>
	* gui/gui_main.cc src/interface.cc:
	- Ifdef out unused depreciated thread code
	* src/breakpoints.cc: remove debug printout

2013-08-02 Roy Rankin <rrankin@ihug.com.au>
	* cli/Makefile.am: Generate missing parse.h even if parse.cc exists,
	  remove scan.cc, parse.cc, parse.h on maintainer-clean, replace
	  INCLUDES
	* extras/ds1820/examples/Makefile.am: Add an 'all' rule, replace GNU
	  make syntax
	* eXdbm/Makefile.am extras/Makefile.am extras/ds1307/Makefile.am
	  extras/ds1820/Makefile.am extras/graphic_lcd/src/Makefile.am
	  extras/lcd/Makefile.am gpsim/Makefile.am gui/Makefile.am
	  modules/Makefile.am src/Makefile.am src/dspic/Makefile.am:
	- Replace depreciated INCLUDES with AM_CPPFLAGS

2013-08-02 Roy Rankin <rrankin@ihug.com.au>
	* cli/Makefile.am : fix SVN parse.h issue with automake >= 1.12
	* gui/gui_src_asm.cc : fix possible array overflow
	* src/pic-processor.cc : Fix MCLR handeling with erroneous WDT message

2013-07-29 Roy Rankin <rrankin@ihug.com.au>
	* regression/p16f676/reset.asm regression/p16f684/reset.asm
	  regression/p16f690/p16f690.asm regression/p1xf18xx/p12f1822.asm
	  regression/p1xf18xx/p16f1823.asm regression/run_regression.sh :
	- Fixes for regression tests
	* cli/input.cc gpsim/main.cc gui/gui_menu.cc gui/gui_regwin.cc
	  modules/ttl.cc src/14bit-processors.cc src/14bit-processors.h
	  src/14bit-registers.cc src/14bit-registers.h src/14bit-tmrs.cc
	  src/14bit-tmrs.h src/16bit-processors.cc src/16bit-processors.h
	  src/16bit-registers.cc src/16bit-registers.h src/a2d_v2.cc
	  src/a2d_v2.h src/a2dconverter.cc src/a2dconverter.h
	  src/comparator.cc src/comparator.h src/eeprom.cc src/i2c-ee.cc
	  src/ioports.cc src/ioports.h src/operator.cc src/os_dependent.cc
	  src/p12f182x.cc src/p12f6xx.cc src/p12f6xx.h src/p12x.cc src/p12x.h
	  src/p16f62x.cc src/p16f62x.h src/p16f87x.cc src/p16f87x.h
	  src/p16f88x.cc src/p16f88x.h src/p16f8x.cc src/p16f8x.h src/p16x5x.cc
	  src/p16x6x.cc src/p16x6x.h src/p16x7x.cc src/p16x7x.h src/p16x8x.cc
	  src/p16x8x.h src/p18x.cc src/p18x.h src/pic-processor.cc
	  src/pic-processor.h src/processor.cc src/psp.cc src/psp.h
	  src/ssp.cc src/ssp.h src/stimuli.cc src/trace.cc src/trigger.cc
	  src/uart.cc src/uart.h :
	- Fix uninitialized variables, access of freed variables,
	  proper delete types, processor classes cleanup on exit
	* src/pic-ioports.cc src/pic-ioports.h :
	- Allow always 1 bits in TRIS, don't trace internal reads of TRIS

2013-07-29 Roy Rankin <rrankin@ihug.com.au>
	* src/pic-instructions.cc :
	- Give proper register name in trace for banked 14bit processor
	  registers
	* configure.ac extras/ds1820/Makefile.am
	  extras/ds1820/examples/Makefile.am :
	- Fixes for make dist
	* src/registers.cc src/registers.h :
	- Make AN_INVALID_ADDRESS globally available


2013-06-30 Borut Razem <borutr@users.sourceforge.net>
	* plat/win32/gpsim.nsi, plat/win32/make.mingw:
	  Mingw compilatin with i686-pc-mingw32-gcc GCC 4.5.2

2013-06-30 Roy Rankin <rrankin@ihug.com.au>
	* cli/socket.cc eXdbm/eXdbm.c eXdbm/misc.c eXdbm/parse.c
	  extras/graphic_lcd/src/glcd.cc gui/gui_regwin.cc
	  gui/gui_scope.cc gui/gui_src.cc gui/gui_src_asm.cc
	  gui/gui_src_opcode.cc gui/gui_trace.cc gui/gui_watch.cc
	  src/attributes.cc src/bitlog.cc src/hexutils.cc src/i2c-ee.cc:
	- Fix compiler warnnings
	* src/16bit-registers.cc: Too many reads of WREG traced
	* src/14bit-processors.h src/14bit-processors.cc src/p12f182x.cc:
	- Try to fix windows regression issues

2013-06-29 Borut Razem <borutr@users.sourceforge.net>
	* gpsim/main.cc: fixed invalid escape
	* plat/win32/libgpsim.def: MSVC sync
	* src/clock_phase.cc: GetTraceLog() for WIN32 compilation

2013-06-29 Roy Rankin <rrankin@ihug.com.au>
	* src/14bit-instructions.cc src/16bit-instructions.cc
	  src/14bit-processors.cc src/14bit-registers.cc src/14bit-registers.h
	  src/16bit-processors.cc src/pic-instructions.cc:
	- remove redundant field added in last patch to WREG, BSR and PCLATH
	  registers
	* src/processor.cc:
	- Speed-up start by skipping resets on alias register memory locations

2013-06-29 Roy Rankin <rrankin@ihug.com.au>
	* cli/cmd_dump.cc src/icd.cc src/p16f88x.cc src/p16x6x.cc
	  src/12bit-processors.cc src/p12f182x.cc src/p12f6xx.cc src/p12x.cc:
	- rename W Wreg
	* src/14bit-processors.cc src/14bit-processors.h src/pic-processor.cc
	  src/pic-processor.h src/14bit-registers.cc src/14bit-registers.h
	  src/14bit-instructions.cc src/16bit-instructions.cc
	  src/pic-instructions.cc src/16bit-processors.cc src/16bit-registers.cc
	  src/p16x5x.cc:
	- Allow break, logging on Wreg(if register in memory), rename W Wreg
	* src/ioports.cc: remove port trace messages
	* src/breakpoints.cc: remove debugging message
	* src/breakpoints.h src/clock_phase.cc src/trace.cc src/trace.h
	- Change logging to be same as break or single step as per doco

2013-06-25 Roy Rankin <rrankin@ihug.com.au>
	* regression/ccp/pwm_6520.asm regression/ccp_628/ccp_628.asm
	  regression/p16f84/reset.asm regression/p18f/reset.asm
	  regression/wdt/wdt_18f452.asm regression/wdt/wdt_18f4620.asm:
	- Adjust tmr0 counts in sleep tests
	* regression/p1xf18xx regression/p1xf18xx/12f1822_g.lkr
	  regression/p1xf18xx/16f1823_g.lkr regression/p1xf18xx/Makefile
	  regression/p1xf18xx/i2c_low.inc regression/p1xf18xx/p12f1822.asm
	  regression/p1xf18xx/p16f1823.asm regression/p1xf18xx/p16f1823_comp.asm
	  regression/p1xf18xx/p16f1823_i2c.asm regression/p1xf18xx/p16f1823_spi.asm
	  regression/p1xf18xx/p16f1823_i2c_v2.asm regression/run_regression.sh
	- Add regression tests for p12f1822 and p16f1823
	* regression/rt.sh: Print fail message
	* src/14bit-registers.cc src/14bit-registers.h
	  src/comparator.cc src/comparator.h src/p12f182x.cc src/p12f182x.h:
	- Add SR latch
	* src/eeprom.cc src/eeprom.h: Modify insturction skip and wait
	* src/gpsim_time.cc src/gpsim_time.h:
	- Modify cycle increment and advance functions
	* src/16bit-registers.cc src/tmr0.cc src/tmr0.h:
	- Fix tmr0 overflow bug and remove empty function

2013-06-21 Roy Rankin <rrankin@ihug.com.au>
	* modules/resistor.cc: Update stimulus node on all property changes
	* src/14bit-instructions.h: Update copyright
	* src/14bit-registers.cc src/14bit-registers.h:
	- Add CPSCON classes for capacitor sensor module
	* src/14bit-tmrs.cc src/14bit-tmrs.h: Add support for capacitor sensor
	* src/a2dconverter.cc src/a2dconverter.h: FVR connect to capacitor sensor
	* src/p12f182x.cc src/p12f182x.h: Add compacitor sensor
	* src/tmr0.cc src/tmr0.h: Support t0xcs flag, remove magic number

2013-06-17 Roy Rankin <rrankin@ihug.com.au>
	* regression/i2c/p16f819.asm: Don't overwrite registers
	* regression/instructions_16bit/instructions_16bit.asm:
	- test subwfb and movlb instructions
	* cli/cmd_load.cc: error message on missing file
	* gui/gui_stopwatch.cc: use units for frequency
	* src/14bit-instructions.cc: fix register restore on retfie
	* src/14bit-processors.cc src/14bit-processors.h: Add CPU Temp
	* src/a2d_v2.h: add comment
	* src/14bit-registers.cc src/14bit-registers.h src/tmr0.cc src/tmr0.h
	  src/14bit-tmrs.cc src/14bit-tmrs.h
	  src/a2dconverter.cc src/a2dconverter.h src/stimuli.h
	  src/comparator.cc src/comparator.h src/ssp.cc src/ssp.h
	  src/p12f182x.cc src/p12f182x.h:
	- add or fix DAC, A2D, Comparator, T0, Tmr1, APFCON, SSP, USART, OSCCON
	* src/p12x.cc src/i2c-ee.cc: compile clean-up
	* src/pic-processor.h: Phase lock * 4 oscilator
	* src/pir.h: add set_c3if, set_c4if, set_tmr1gif
	* src/uart.cc src/uart.h: allow port select

2013-05-21 Borut Razem <borut.razem@gmail.com>
	* plat/win32/gpsim.nsi: added RequestExecutionLevel admin

2013-05-21 Roy Rankin <rrankin@ihug.com.au>
	* extras/ds1820/rom1w.cc extras/ds1820/bit1w.cc:
	- Fixes for windows compile
	* gui/gui_stack.cc: Fix issue for 14bit enhanced stack
	* src/14bit-hexdecode.cc src/14bit-instructions.cc
	  src/14bit-instructions.h src/14bit-registers.cc
	  src/pic-instructions.cc src/14bit-registers.h:
	- 14bit enhanced commands and register fixup
	* src/a2dconverter.cc src/a2dconverter.h src/eeprom.cc
	  src/pic-processor.cc src/pic-processor.h src/p12f182x.cc
	  src/p12f182x.h: Add incomplete p16f1823 processor

2013-05-17 Roy Rankin <rrankin@ihug.com.au>
	* configure.ac extras/Makefile.am extras/ds1820/Makefile.am
	  extras/ds1820/bit1w.cc extras/ds1820/bit1w.h
	  extras/ds1820/ds1820.cc extras/ds1820/ds1820.h
	  extras/ds1820/makefile.mingw extras/ds1820/module_manager.cc
	  extras/ds1820/rom1w.cc extras/ds1820/rom1w.h
	  extras/ds1820/examples/16f1823_g.lkr extras/ds1820/examples/Makefile
	  extras/ds1820/examples/README extras/ds1820/examples/ds1820.asm
	  extras/ds1820/examples/ds18b20.asm: Add module for ds1820, ds18s20
	  and ds18b20 temperature sensors
	* extras/ds1307/examples/README: fix typo

2013-05-04 Borut Razem <borut.razem@gmail.com>
	* src/makefile.mingw: added p12f182x.o

2013-05-04 Roy Rankin <rrankin@ihug.com.au>
	* gui/gui_profile.cc: compiler warning cleanup
	* regression/p18f/extended_instructions.asm src/16bit-hexdecode.cc
	  src/16bit-instructions.cc src/16bit-instructions.h
	  src/16bit-processors.cc src/16bit-processors.h
	  src/p18x.cc:
	- fix "Data addressing wrong (PIC18 w/ extended instruction mode)" - #139
	* src/16bit-registers.cc src/16bit-registers.h regression/p18f/reset.asm
	  src/14bit-registers.cc src/14bit-registers.h src/pic-processor.cc:
	- 18F stack reset on over/under flow - bug #154

2013-04-23 Roy Rankin <rrankin@ihug.com.au>
	* 14bit-hexdecode.cc 14bit-instructions.cc 14bit-instructions.h
	  14bit-processors.cc 14bit-processors.h 14bit-registers.cc
	  14bit-registers.h 16bit-hexdecode.cc 16bit-instructions.cc
	  16bit-instructions.h 16bit-processors.cc 16bit-registers.cc
	  16bit-registers.h pic-instructions.cc pic-ioports.cc
	  pic-ioports.h pic-processor.cc pic-processor.h:
	- Add 14bit enhanced base class _14bit_e_processor
	* intcon.cc breakpoints.cc interface.cc: Fix compiler warnings
	* p12f182x.cc p12f182x.h Makefile.am:
	- add p12f1822 processor(incomplete)
	* gpsim_classes.h 12bit-processors.cc trace.cc: New stack with reset
	* processor.cc processor.h eeprom.cc eeprom.h: New eeprom class

2013-04-05 Roy Rankin <rrankin@ihug.com.au>
	* src/comparator.cc: fix pir1  setting with 2 comparators

2013-04-05 Roy Rankin <rrankin@ihug.com.au>
	* regression/Makefile.am: use regexp for regression EXTRA_DIST files
	* regression/run_regression.sh
	  regression/p16f684/16f684.lkr regression/p16f684/Makefile
	  regression/p16f684/a2d_684.asm regression/p16f684/compar_684.asm
	  regression/p16f684/compar_684.stc regression/p16f684/epwm.asm
	  regression/p16f684/nwdt_16f684.asm regression/p16f684/reset.asm
	  regression/p16f684/wdt_16f684.asm
	  regression/wdt/18f4620.lkr regression/wdt/Makefile
	  regression/wdt/nwdt_18f4620.asm regression/wdt/wdt_18f4620.asm:
	- New regression tests
	* src/p12f6xx.cc src/p16f88x.cc src/p16f88x.h src/pic-processor.cc
	  src/pic-processor.h src/pir.cc src/pir.h: Add 16f684 processor

2013-04-02 Borut Razem <borut.razem@gmail.com>
	* doc/gpsim.html, doc/gpsim_svn.html:
	  update links after project update to Allura

2013-03-25 Roy Rankin <rrankin@ihug.com.au>
	* eXdbm/parse.c: fix variable type mismatch, bug 3570700
	* src/16bit-registers.cc src/pic-registers.cc: commands with
	  PCL modification should take 2 cycles, bug 3509904

2013-03-23 Roy Rankin <rrankin@ihug.com.au>
	* extras/Makefile.am extras/ds1307/Makefile.am
	  extras/graphic_lcd/INSTALL extras/lcd/INSTALL extras/lcd/Makefile.am
	- extras/graphic_lcd/configure.ac extras/lcd/autogen.sh
	  extras/lcd/configure.in : Integrate extras further into linux build
	  bug - 3560435

2013-03-20 Roy Rankin <rrankin@ihug.com.au>
	* regression/run_regression.sh regression/usart_test/18f2455.lkr
	  regression/usart_test/Makefile regression/usart_test/eusart_2455.asm
	  src/p18x.cc: Fix portc tris control and thus eusart operation
	  for 18f[24]455 processors, bug 3171842

2013-03-18 Roy Rankin <rrankin@ihug.com.au>
	* modules/usart.cc: Debug message improved
	* regression/usart_test/usart_pir1v2.asm: test improved
	* src/uart.cc: fix SPBRG callback stall, bug 3602243

2013-03-16 Roy Rankin <rrankin@ihug.com.au>
	* regression/ccp_628/ccp_628.asm:
	- fix for gpasm change
	* regression/p18f/18f4321.lkr regression/p18f/Makefile
	  regression/p18f/extended_instructions.asm
	  regression/p18f/instructions.asm regression/p18f/reset.asm:
	- Switch to 18f4321 from 18f453 for true extended instruction set
	  as now required by gpasm
	* regression/psp/18f6520.lkr regression/psp/Makefile
	  regression/psp/p18f6520.asm regression/run_regression.sh
	  src/psp.cc src/psp.h src/p18x.cc src/p18x.h:
	- Add psp functionality to 18f6520 - bug 3607516
	  Fix TRISD TRISE values after WDT reset - bug  3607517
	* src/comparator.cc: Fix for compiler warning

2013-03-03 Roy Rankin <rrankin@ihug.com.au>
	* src/cod.cc:
	  fix regressions caused by 2012-06-19 changes
	* cli/parse.yy:
	  fix compile error with gcc 4.7.2

2013-03-02 Roy Rankin <rrankin@ihug.com.au>
	* configure.ac, Makefile.am:
	  On OpenBSD, dlopen() and friends are provided within libc and there
	  is no libdl.- patch 3601674

2012-06-19 Borut Razem <borut.razem@gmail.com>
	* src/cod.cc:
	  fixed loading cod file for program memory > 64k
	* gui/gui_menu.cc:
	  modified mail address

2012-06-17 Rob Pearce <rob@bdt-home.demon.co.uk>
	* configure.ac
	  Applied patch 3531562 to allow build against gtkextra-3

2012-03-19 Roy Rankin <rrankin@ihug.com.au>
	* regression/ccp/ccp_877a.asm src/14bit-tmrs.cc
	  Fix CCP compare zero of TMR1 - bug 3508318

2012-02-28 Rob Pearce <rob@bdt-home.demon.co.uk>
	* src/p16f88x.cc
	  Fix port C for 16f631 family - support request 3495121

2012-01-05 Roy Rankin <rrankin@ihug.com.au>
	* src/breakpoints.h src/breakpoints.cc src/trace.cc cli/cmd_break.cc
	  Get logging working - bug 3432821

2012-01-03 Roy Rankin <rrankin@ihug.com.au>
	* gpsim/Makefile.am extras/graphic_lcd/configure.ac
	  Changes for clantg++ compatibility as per bug 3426932

2012-01-03 Roy Rankin <rrankin@ihug.com.au>
	* src/p18x.h src/pir.cc src/pir.h src/p18x.cc
	  Add USB registers (but not functionality) to 18F2455, 18F4455
	  after patch 3308765.
	* src/bitlog.h : fix to compile with latest glib
	* gui/gui_regwin.cc : fix reg=0 defense

2011-10-22 Rob Pearce<rob@bdt-home.demon.co.uk>
	* src/processor.cc
	  Applied patch from Rupert Swarbrick in bug 3426928 - don't rely on
	  static ProcessorConstructor instances being constructed before
	  ProcessorConstructorList::findByType is called (avoids a segfault
	  with some compilers)
	* src/14bit-tmrs.h src/p18x.cc
	  Trivial: renamed a method for consistency with similar classes.
	* gui/gui_watch.cc
	  Show all printable ASCII characters in watch window, not just those
	  between '0' and 'z'

2011-10-19 Rob Pearce<rob@bdt-home.demon.co.uk>
	* src/registers.h src/14bit-registers.cc src/14bit-tmrs.cc
	  src/ioports.cc src/registers.cc src/14bit-tmrs.h
	  src/14bit-registers.h src/16bit-processors.cc
	  gui/gui_watch.cc
	  Cleaned up Register class "bit_mask" member and fixed bug 3425453
	* regression/instructions_16bit/instructions_16bit.asm
	  regression/instructions_14bit/branching.asm
	  Regression tests for PCLATH register width

2011-06-02 Rob Pearce<rob@bdt-home.demon.co.uk>
	* src/16bit-registers.cc
	  Attempt to fix bug 3311944 - reported as a POSTDEC bug but actually was
	  that lfsr didn't work as the very first instruction at the reset vector
	* src/registers.h src/pic-registers.cc
	  Fix ability to set PC from the command line, but not using the nasty
	  hack in patch #3318235 - instead it's done properly

2011-06-02 Rob Pearce<rob@bdt-home.demon.co.uk>
	* src/p18x.h
	  Fixed SFR size for 18Fx455 CPUs (with USB)
	* src/16bit-registers.cc src/16bit-registers.h src/16bit-instructions.cc
	  regression/p18f/extended_instructions.asm :
	  Fix for bug #3309120 and related indirect addressing problems on 18F
	  in extended mode. Also a regression test for such issues.


2011-05-15 Roy Rankin <rrankin@ihug.com.au>
	* configure.ac : increase release number for development cycle

2011-04-27 Rob Pearce<rob@bdt-home.demon.co.uk>
	* doc/gpsim.html : Minor corrections to CPU list.

2011-04-27 Roy Rankin <rrankin@ihug.com.au>
	* regression/p16f690/Makefile : use local lkr file
	* regression/Makefile.am : tarball fix
	* configure.ac : increase release number
	* doc/gpsim.html ANNOUNCE : update documentation for release

2011-04-20 Roy Rankin <rrankin@ihug.com.au>
	* configure.ac ANNOUNCE : New release
	* regression/wdt/nwdt_16f648a.asm regression/wdt/16f648a.lkr
	  regression/wdt/Makefile regression/Makefile.am
	  regression/run_regression.sh : new regression test

2011-04-17 Rob Pearce<rob@bdt-home.demon.co.uk>
	* doc/gpsim.lyx : Minor corrections and a note on PIC18 program memory
	  addressing.

2011-04-17 Roy Rankin <rrankin@ihug.com.au>
	* regression/usart_test/18f2221.lkr : replaces 18f2321.lkr
	* regression/Makefile.am : update regression file list
	* doc/gpsim.lyx modules/led.cc modules/led.h : Led module active high
	  or low. Original patch from Tom Crane.

2011-04-09 Borut Razem <borut.razem@gmail.com>
	* plat/win32/gpsim.nsi: removed extras/lcd/examples/lcdmemtest.hex

2011-04-07 Rob Pearce<rob@bdt-home.demon.co.uk>
	* src/p12f6xx.cc src/p16f88x.cc src/pic-ioports.h src/pic-ioports.cc
	  regression/p12f675/12f629.lkr regression/p12f675/p12f629.asm
	  regression/p12f675/Makefile
	  regression/interrupts_14bit/interrupts_14bit.asm
	  regression/run_regression.sh :
	  Implemented patch for bug 3277143 (INT pin mis-handled on 12F629)
	  and fixed the similar error on 16F88x. Also fixed the interrupt
	  regression test to check INTEDG works (as had previously been done
	  for 18F devices) and added a 12F629 test that checks interrupts

2011-03-30 Roy Rankin <rrankin@ihug.com.au>
	* gui/gui_src_asm.cc : fix <main>/Windows/Source not ticked on
	  startup.

2011-03-23 Roy Rankin <rrankin@ihug.com.au>
	* src/pic-processor.cc src/pic-processor.h src/p12x.h
	  regression/wdt/10f200.lkr regression/wdt/wdt_10f200.asm
	  regression/wdt/Makefile regression/a2d/p10f222.asm
	  regression/run_regression.sh : Fix 10f2xx WDT bug 3059498
	* regression/Makefile.am :
	- Add missing regression files into dist tarball
	* extras/lcd/examples/lcdmemtest.hex :
	- delete file from svn make clean removes
	* gui/gui_symbols.cc gui/gui_trace.cc gui/gui_menu.cc gui/gui_stack.cc
	  gui/gui_watch.cc : Fix compiler warnings

2011-03-12 Roy Rankin <rrankin@ihug.com.au>
	* regression/p16f690/nwdt_16f631.asm regression/p16f690/eusart.asm
	  regression/p16f690/epwm.asm regression/p16f690/p16f690.asm
	  regression/p16f690/wdt_16f685.asm regression/p16f690/wdt_16f677.asm
	  regression/p16f690/16f631.lkr regression/p16f690/Makefile
	  regression/Makefile.am regression/run_regression.sh
	  src/comparator.h src/14bit-registers.h src/processor.h
	  src/pic-processor.cc src/a2dconverter.h src/p16f88x.h
	  src/comparator.cc src/p16f88x.cc src/pic-processor.h
	  src/14bit-registers.cc src/a2dconverter.cc :
	+   Feature request 3110405 add 16f690/631/677/685/687/689
	* gui/gui_src_asm.cc gui/gui_src.h :
	+   Fix Source browser crash on font change (3190800)
	* src/p16x6x.h regression/interrupts_16bit/Makefile
	  regression/usart_test/eusart.asm : Cosmetic fixes

2011-03-05 Roy Rankin <rrankin@ihug.com.au>
	* gui/gui_src_opcode.cc : set style for all p18 in program memory window

2011-03-01 Roy Rankin <rrankin@ihug.com.au>
	* gui/gui_src_opcode.cc : Further font fixes in program memory window
	* gui/gui_src.cc : memory program window updated during running

2011-02-21 Roy Rankin <rrankin@ihug.com.au>
	* gui/gui_src.h gui/gui_src_opcode.cc gui/gui_main.cc :
	+ Fix issues with program memory window with P18 processors (3174547)
	  and font issues.
	* gui/gui_src_asm.cc : minor display change for readability

2011-02-17 Roy Rankin <rrankin@ihug.com.au>
	* regression/tmr0_16bit/tmr0_16bit.stc regression/tmr0_16bit/Makefile
	  regression/Makefile.am : remove trivial STC file
	* src/16bit-processors.cc src/14bit-registers.h src/uart.cc
	  src/gpsim_time.cc src/psp.h src/bitlog.cc src/16bit-registers.cc
	  modules/usart.cc gui/gui_symbols.cc gui/gui_profile.cc
	  gui/gui_src_asm.cc : Fix uninitialized variables detected by
	  valgrind

2011-02-17 Borut Razem <borut.razem@gmail.com>
	* plat/win32/gpsim.nsi: fixed bug #3151323: problem on start gpsim

2011-02-13 Rob Pearce<rob@bdt-home.demon.co.uk>
	* src/p18x.h src/p18x.cc
	  Fixes to 18F6520 implementation: correct EEPROM size, remove spurious
	  wrong clock pin allocation, adjust structure to match style of 4x21 types

2011-02-12 Rob Pearce<rob@bdt-home.demon.co.uk>
	* src/p18x.h src/p18x.cc src/pic-processor.cc src/pic-processor.h
	  Implemented the remaining devices from DS39689E (18F2221 & 4221) and
	  all devices from DS39631D (18F2420,2520,4420,4520)

2011-02-10 Rob Pearce<rob@bdt-home.demon.co.uk>
	* src/p18x.h src/p18x.cc
	  Re-factored 18F2455 and 18F4455 to be derived from 2x21 and 4x21 so
	  they get the right Config3H and the right ADC, plus RE3/MCLRE pin

2011-02-03 Rob Pearce<rob@bdt-home.demon.co.uk>
	* src/p18x.h src/16bit-processors.cc src/p18x.cc src/eeprom.h
	  Small re-organisation of how the EEPROM gets added to 18f2x21 and 4x21
	  derivatives. Some of the decisions pushed into the core classes so that
	  new CPU derivatives need fewer unique methods.

2011-02-03 Roy Rankin <rrankin@ihug.com.au>
	* src/intcon.cc regression/tmr0_16bit/tmr0_16bit.asm
	  regression/ccp_628/ccp_628.asm :
	+ tmr0 not waking after sleep (bug 3162315)
	* src/ssp.cc : SPI and I2C may not start (bug 3169541)
	* extras/rs232-gen/rs232-gen.c extras/rs232-gen/example/Makefile
	  extras/rs232-gen/Makefile : Update syntax (patch 3125817),
	  fix baud rate

2011-02-03 Rob Pearce<rob@bdt-home.demon.co.uk>
	* src/p18x.cc src/p18x.h src/pic-processor.cc src/pic-processor.h
	  src/eeprom.cc src/eeprom.h
	  Initial implementation of PIC18F4620 for feature request #3159000
	  EEPROM_PIR class modified to support >256 byte EEPROM
	  Some re-factoring of 18F2x21 derivatives for less duplication
	  Config3H_2x21 class now implements PBADEN bit. Attempts to implement
	  CCP2MX bit too, but the CCPCON class doesn't allow the pin re-allocation
	  Note: This would break the 18F2455 so its Config3H has been commented
	  until it is re-factored to be derived from the right base class!

2011-02-02 Rob Pearce<rob@bdt-home.demon.co.uk>
	* src/cod.cc
	  Fixed addressing of memory on 16-bit cores while allocating HLL code
	  references. This was responsible for a crash with large programs / long
	  addresses found in 18F4620 development and bug #3154828, although it's
	  not necessarily the only cause of that.

2011-01-03 Roy Rankin <rrankin@ihug.com.au>
	* src/comparator.cc regression/comparator/compar_882.asm
	  regression/comparator/16f882.lkr regression/comparator/Makefile
	  regression/run_regression.sh : Fix for bug # 3150231
	  Polarity should not change when ON bit is off. Fix comparator
	  output pins cannot be driven from port when comparator is off.
	  Add regression tests.

2010-12-10 Rob Pearce<rob@bdt-home.demon.co.uk>
	* src/14bit-tmrs.cc regression/ccp/pwm_6520.asm regression/ccp/pwm_877a.asm
	  Fix for bug #3132914 : The clocking of TMR2 should not be affected by
	  whether any of the CCPs are in PWM mode, and now it isn't. Duty cycle
	  value is now handled correctly instead.

2010-11-28 Rob Pearce<rob@bdt-home.demon.co.uk>
	* src/pic-ioports.cc src/intcon.h
	  regression/interrupts_16bit/interrupts_16bit.asm :
	  Fix for bug #3120903 : INT0 edge selection moved to the correct
	  register on 16-bit devices. Also fixed the regression test so that it
	  actually bothers to check which edge caused the interrupt.
	  Code for INT3 implemented but not tested yet.

2010-10-31 Rob Pearce<rob@bdt-home.demon.co.uk>
	* src/16bit-instructions.cc src/pic-processor.h src/p18x.h
	  Partial implementation of "bugs" list (errata per CPU type) so that
	  the 18F6520 has a buggy DAW instruction while the 18F4321 has a
	  correct one. This matches the real hardware for those two - others
	  need checking.
	* src/16bit-processors.h src/16bit-instructions.cc src/p18x.h
	  A different approach to fixing the compiler warning Roy spotted (I'd
	  already corrected my earlier error locally).

2010-10-31 Roy Rankin <rrankin@ihug.com.au>
	* src/16bit-processors.cc src/intcon.h src/intcon.cc
	  src/pic-ioports.h src/pic-ioports.cc
	  regression/interrupts_16bit/priority.asm
	  regression/interrupts_16bit/interrupts_16bit.asm :
	- implement intcon3 for int1, int2 operation bug #3071596
	* src/16bit-instructions.cc : fix complier warning

2010-10-25 Rob Pearce<rob@bdt-home.demon.co.uk>
	* modules/ttl.cc modules/ttl.h modules/gpsim_modules.cc
	  regression/ttl/ttl165.asm regression/ttl/Makefile
	  regression/run_regression.sh
	  Added a module to simulate a 74x165 parallel-to-serial shift register

2010-10-22 Rob Pearce<rob@bdt-home.demon.co.uk>
	* src/14bit-tmrs.cc src/14bit-tmrs.h src/16bit-processors.cc
	  src/p12f6xx.cc src/p16f88x.cc src/p16x6x.cc src/p18x.cc
	  Fixed TMR2 to support multiple PWMs, bug #2823242
	  Implemented all five PWMs on the 18F6520
	  Fixed TMR2 wrap bug, #3092906
	* regression/ccp/pwm_6520.asm regression/ccp/18f6520.lkr
	  regression/ccp/Makefile regression/run_regression.sh
	  Added regression test for the above

2010-10-08 Rob Pearce<rob@bdt-home.demon.co.uk>
	* modules/resistor.cc modules/resistor.h
	  Minor fix to pulldown so that its resistance attribute is correctly
	  initialised to 0 (it was confused and showed as 5V)

2010-09-29 Rob Pearce<rob@bdt-home.demon.co.uk>
	* src/p18x.h src/p18x.cc src/16bit-processors.cc src/16bit-processors.h
	  Fixed GPR memory size and SFR peripheral set of 18F1220 (the 16 bit
	  base class assumptions of portC and CCP2 are now optional)
	* src/14bit-tmrs.h src/14bit-tmrs.cc src/uart.cc
	  Partial rework for >2 PWMs as on 18F6520, and multiple UARTs naming

2010-08-25 Rob Pearce<rob@bdt-home.demon.co.uk>
	* src/p18x.h src/p18x.cc src/p16x6x.cc src/p12f6xx.cc src/p16f88x.cc
	  src/16bit-processors.cc src/16bit-processors.h src/pir.cc src/pir.h
	  src/pic-instructions.cc src/pic-processor.h src/16bit-instructions.cc
	  src/14bit-tmrs.h src/14bit-tmrs.cc
	  Implemented PIR3 for 18F6520, including the presence of multiple
	  CCPxIF flags in one PIR (needed some re-design)
	  Fixed implementation of 18F "access bank", as some devices have more
	  than 128 bytes mapped to SFR space

2010-08-21 Rob Pearce<rob@bdt-home.demon.co.uk>
	* src/p18x.h src/p18x.cc src/p16x6x.cc src/p16f87x.cc src/p16f62x.cc
	  src/p16f88x.cc src/p16f8x.cc src/16bit-processors.cc
	  src/pic-processor.cc src/pic-processor.h src/uart.cc src/uart.h
	  Partial implementation of 18F6520, including change to UART-PIR
	  linkage for multiple UART support.

2010-07-12 Roy Rankin <rrankin@ihug.com.au>
	* configure.ac : release changed to 0.25.1 post release SVN

2010-06-28 Roy Rankin <rrankin@ihug.com.au>
	* configure.ac : release changed to 0.25.0
	* ANNOUNCE : 0.25.0 highlights

2010-06-28 Roy Rankin <rrankin@ihug.com.au>
	* src/16bit-processors.h src/16bit-processors.cc
	  src/pic-processor.cc src/pic-processor.h src/p18x.cc :
	- fix porta7 for P18 processors, bug 3021904
	* src/pic-ioports.h src/pic-ioports.cc regression/p16f676/reset.asm :
	- mask bits on write to tris regeister

2010-06-26 Rob Pearce<rob@bdt-home.demon.co.uk>
	* src/ssp.cc regression/spi/p18f242.asm
	  Fix for bug #3021514 :
	    - MSbit is now correctly sent in CKE=1 mode
	    - Clock not disturbed if second byte sent within half bit of SSPIF
	  Extended one of the SPI regression tests to include CKE=1 mode

2010-06-25 Rob Pearce<rob@bdt-home.demon.co.uk>
	* modules/ttl.cc modules/ttl.h modules/gpsim_modules.cc
	  Fix to TTL377 so that all eight latches update "simultaneously"
	  Added TTL595 serial-in-parallel-out shift register

2010-06-23 Roy Rankin <rrankin@ihug.com.au>
	- missed CLOCK_EXPERIMENTS changes

2010-06-22 Roy Rankin <rrankin@ihug.com.au>
	- remove dead code from CLOCK_EXPERIMENTS

2010-06-20 Roy Rankin <rrankin@ihug.com.au>
	* src/pic-processor.cc src/clock_phase.cc
	- fix cycle counter bug 3018510

2010-06-12 Rob Pearce<rob@bdt-home.demon.co.uk>
	* src/14bit-tmrs.cc
	  Fix uninitialised ssp_module pointer (potential segfault)

2010-06-09 Ralf Forsberg <rfg@users.sourceforge.net>
	* src/pic-processor.cc : Fix integer overflow in realtime mode.

2010-06-07 Roy Rankin <rrankin@ihug.com.au>
	* gui/gui_src_asm.cc : fix bug 3012488 finish key SIGSEGV for hex file

2010-06-07 Roy Rankin <rrankin@ihug.com.au>
	* src/pic-processor.cc : patches for realtime with GUI mode
	* doc/gpsim.html doc/gpsim.lyx gpsim.spec.in : Documentation of new
	  license

2010-06-06 Borut Razem <borut.razem@siol.net>
	* modules/modules.vcproj, plat/win32/libgpsim.def,
	  modules/gpsim_modules.cc: MSVC sync

2010-06-06 Ralf Forsberg <rfg@users.sourceforge.net>
	- Don't add files from cod if the actual file is missing.

2010-06-06 Ralf Forsberg <rfg@users.sourceforge.net>
	- Switching to realtime mode could hang up.

2010-06-06 Ralf Forsberg <rfg@users.sourceforge.net>
	- Fixed step_over in HLL_MODE.
	- Update gui after finish command.

2010-06-06 Roy Rankin <rrankin@ihug.com.au>
	* gpsim/Makefile.am src/dspic/Makefile.am src/Makefile.am doc/Makefile.am
	  extras/graphic_lcd/src/Makefile.am extras/ds1307/Makefile.am modules/Makefile.am
	  gui/Makefile.am cli/Makefile.am Makefile.am : include windows build
	  files in distribution tarball

2010-06-06 Ralf Forsberg <rfg@users.sourceforge.net>
	- Remove MCLR pin monitor in pic destructor to avoid segfault in IOPIN desctructor.

2010-06-06 Roy Rankin <rrankin@ihug.com.au>
	* regression/p18f/extended_instructions.asm: add nops after asserts
	* INSTALL.gpsim : rename as INSTALL gets overwritten
	* doc/gpsim.html doc/gpsim_svn.html README Makefile.am : document
	  LGPLv2+ change

2010-06-05 Borut Razem <borut.razem@siol.net>
	* modules/makefile.mingw: included video.* module
	* plat/win32/gpsim.nsi: updated dependency packages

2010-06-05 Roy Rankin <rrankin@ihug.com.au>
	* gui/gui_menu.cc gui/gui_statusbar.cc : fix bug 3009843
	  Simulation Time HH:MM:SS.CC displays incorrectly

2010-06-05 Roy Rankin <rrankin@ihug.com.au>
	* src/ modules/ COPPYING.LESSER README : to LGPLv2+

2010-06-04 Ralf Forsberg <rfg@users.sourceforge.net>
	- Added back HLL source browser support for sdcc and jal.
	- Fixed bug in FileContext where the vector pointers could become
	  dangling after stl magic because of missing copy constrctor.
	  Made them objects instead of pointers.

2010-05-?? Ralf Forsberg <rfg@users.sourceforge.net>
	- Optimized video module using pixmap shadow buffer.

2010-06-01 Roy Rankin <rrankin@ihug.com.au>
	* src/14bit-tmrs.h src/14bit-tmrs.cc src/comparator.h src/comparator.cc
	  src/p16f88x.cc src/p18x.h src/p18x.cc : Enhanced PWM Auto-Shutdown

2010-05-27 Roy Rankin <rrankin@ihug.com.au>
	* modules/video.cc modules/gpsim_modules.cc modules/video.h modules/Makefile.am
	+ resurrect video module patch 3007214 by Paul S

2010-05-22 Roy Rankin <rrankin@ihug.com.au>
	* src/comparator.h src/14bit-tmrs.cc src/comparator.cc src/p16f88x.cc
	- Add comparator 2 gate control of timer 1 for 16f88x
	* src/uart.cc : fix bug 2827439 USART pin direction
	* modules/logic.cc : fixed compilation warnings

2010-05-18 Borut Razem <borut.razem@siol.net>
	* src/makefile.mingw: added p16f88x.o
	* extras/graphic_lcd/src/makefile.mingw, extras/lcd/makefile.mingw:
	  include project root directory for config.h
	* extras/graphic_lcd/src/ssd0323.cc: fixed compilation warnings
	* extras/ds1307/makefile.mingw: added
	* makefile.mingw: adedd extras/ds1307 build
	* plat/win32/gpsim.nsi: added extras/ds1307/* to the package

2010-05-17 Roy Rankin <rrankin@ihug.com.au>
	- Extras built, installed as part of Gpsim

2010-05-17 Roy Rankin <rrankin@ihug.com.au>
	- Add ds1307 Realtime Clock module

2010-05-11 Roy Rankin <rrankin@ihug.com.au>
	* src/dspic/dspic-processors.cc src/dspic/dspic-registers.cc
	  src/pic-processor.cc src/icd.cc src/16bit-registers.cc
	  src/registers.h src/pic-registers.cc: Remove use of memory_size_mask
	  which assumed memory size 2^n (bug 2979021)
	* src/pic-ioports.cc: B0 edge wakes processor from sleep (bug 2999264)

2010-05-01 Rob Pearce<rob@bdt-home.demon.co.uk>
	* src/16bit-registers.cc src/pic-instructions.cc
	  Fixed bug #2983660 - BSF and BCF now work right on PLUSW registers
	  Also PLUSW registers now work if destination is address 0
	* regression/psp/p16f871.asm regression/psp/p18f452.asm
	  Fixed the PSP regression test code to de-select the ADC channels,
	  because the above fix shows up that they should (probably) have
	  failed before.

2010-04-10 Roy Rankin <rrankin@ihug.com.au>
	* src/p16f8x.cc: correct usart pins for p16f87/8 (patch 2116354)
	* src/14bit-processors.cc: Correctly wake up from sleep
	  (patch 2348392)
	* cli/cmd_load.cc doc/gpsim.lyx : Documentation updates
	  (patch 2108073)

2010-04-08 Roy Rankin <rrankin@ihug.com.au>
	* gui/gui_breadboard.cc: fix trace bug 2983580
	* src/pic-processor.cc: fix realtime mode lockup (bug 2973978)
	* src/p18x.h src/p18x.cc: add extended PWM
	* src/14bit-tmrs.cc src/14bit-tmrs.h: initialize some variables, fix
	  to have extended PWM work with processors without prtrcon register

2010-04-07 Roy Rankin <rrankin@ihug.com.au>
	* gui/gui_breadboard.cc: lighten low pin color for those with
	  red-green color blindness

2010-04-06 Roy Rankin <rrankin@ihug.com.au>
	* src/p16f88x.h src/p16f88x.cc src/Makefile.am src/pic-processor.h
	  src/pic-processor.cc : Add 16f882/883/884/886/887 processors
	* src/comparator.h src/comparator.cc: add class used in 16f88x
	* src/14bit-tmrs.h src/14bit-tmrs.cc: add PWM(enhanced mode) support
	* src/pir.h src/pir.cc: add interupts for 16f88x
	* src/uart.cc: fix send_break code
	* src/uart.h: define 16f88x SCKP bit in  _BAUDCON
	* src/a2dconverter.h src/a2dconverter.cc: ADC for 16f88x
	* src/ssp.cc: warning message line numbers in decimal
	* src/pic-registers.cc : fix debug statement
	* regression/usart_test/eusart.asm: refine test

2010-03-29 Rob Pearce<rob@bdt-home.demon.co.uk>
	* src/16bit-processors.cc src/16bit-processors.h src/p18x.cc src/p18x.h
	  regression/instructions_16bit/18f452.lkr
	  regression/instructions_16bit/instructions_16bit.asm
	  Moved loading/reading of EEPROM and ID locations for 18F out of
	  the 18fxx20 class into the base class, as it's common to all the
	  family
	* src/intcon.cc
	  Commented out an annoying debug print that isn't needed any more

2010-03-29 Roy Rankin <rrankin@ihug.com.au>
	* gui/gui_scope.cc
	  use previous size and position of window (bug 2973982)

2010-03-28 Rob Pearce<rob@bdt-home.demon.co.uk>
	* src/p16f62x.cc
	  Fixed missing aliases of INDF, PCLATH and INTCON (bug 2977843)

2010-03-12 Rob Pearce<rob@bdt-home.demon.co.uk>
	* src/p18x.cc src/processor.cc
	  Fixed loading of EEPROM data from COD/HEX on 18F (bug 2968268)

2010-03-10 Rob Pearce<rob@bdt-home.demon.co.uk>
	* src/16bit-instructions.cc
	  regression/instructions_16bit/instructions_16bit.asm :
	  Fix issue 2968248; carry flag is "sticky" to DAW instruction
	* src/pic-ioports.cc
	  regression/p18f452_ports/p18f452_ports.asm :
	  Fix issue 2902082; writing the PORT register now updates the LAT
	  register too.

2010-02-07 Roy Rankin <rrankin@ihug.com.au>
       * src/pic-processor.cc: Fix real-time mode regression
	 (bug 2930175)

2010-01-12 Roy Rankin <rrankin@ihug.com.au>
       * src/p18x.h src/p18x.cc src/16bit-registers.cc: Add
	 eeprom, usart for 18f1220/1320
       * src/uart.cc src/uart.h: Eusart fixes and debug print fixes
       * modules/usart.cc: scroll patch and debug print fixes
       * regression/usart_test/eusart.asm: Pin direction per docs
       - Most of above changes supplied by Geoffrey Hausheer

2010-01-07 Roy Rankin <rrankin@ihug.com.au>
	* gui/gui_menu.cc: Fix sigsegv when changing simulation time
	  units when no processor is defined (bug 2926629)

2006-11-07 Scott Dattalo <scott@dattalo.com>
	* src/p18x.hh: wrong register memory size (bug 2921532)

2009-11-22 Rob Pearce<rob@bdt-home.demon.co.uk>
	* src/p18x.cc
	  Fixed the creation of ports D and E on 18F4x21 devices

2009-10-25 Roy Rankin <rrankin@ihug.com.au>
	* src/p16f62x.h : wrong program memory size (bug 2885817)

2009-10-11 Roy Rankin <rrankin@ihug.com.au>
	* configure.ac : Missing readline lib now a terminating error
	  for configure. (bug 2868402) Set version to 0.24.1

2009-09-28 Rob Pearce<rob@bdt-home.demon.co.uk>
	* src/16bit-hexdecode.cc, src/pic-processor.cc, src/16bit-tmrs.cc
	  src/14bit-tmrs.cc, src/14bit-registers.cc, src/pic-ioports.cc
	  Trivial changes only:
	    - re-ordered processor type creation so the list reported is nearer
	      numeric order
	    - removed all #includes of processor type headers from "core" code
	      (i.e. not processor type definition files) except pic-processor.cc
	  The idea is to head towards being able to define processors outside of
	  the core GPSim library, by making GPSim follow that sort of structure.

2009-09-13 Rob Pearce<rob@bdt-home.demon.co.uk>
	* extras/graphic_lcd/src/gpsim_modules.cc, extras/lcd/module_manager.cc,
	  modules/gpsim_modules.cc, modules/encoder.cc
	  Trivial changes only - removed some very obsolete commented out code
	  and erroneous statements about module libraries.

2009-08-24 Borut Razem <borut.razem@siol.net>
	* src/14bit-registers.h, src/makefile.mingw, plat/win32/libgpsim.def:
	  src/src.vcproj: mingw and MSVC sync

2009-08-24 Roy Rankin <rrankin@ihug.com.au>
	* gpsim/main.cc doc/gpsim.lyx : document optional -c -s
	* configure.ac ANNOUNCE : update for release 0.24.0
	* doc/gpsim.html PROCESSORS : update with new processors

2009-08-23 Roy Rankin <rrankin@ihug.com.au>
	* src/os_dependent.cc : For linux fix loading modlib bug #2837446

2009-08-23 Roy Rankin <rrankin@ihug.com.au>
	* regression/p12f675/12f683.lkr regression/p12f675/p12f683.asm
	  regression/p12f675/Makefile regression/run_regression.sh
	* add p12f683 regression test
	* regression/p12f675/p12f675.asm : fix bug in test
	* src/14bit-tmrs.h src/14bit-tmrs.cc  src/comparator.h
	  src/comparator.cc : support cmp T1 gate
	* src/p12f6xx.h src/p12f6xx.cc src/pic-processor.cc
	  src/pic-processor.h : add P12f683
	* src/eeprom.cc : print message if both RD and WR set in EECON1::put
	* src/gpsim_time.cc : add more debug output
	* src/trace.h : delete commented out code
	* src/eeprom.h :  add callback_print() for debugging
	* gui/gui_regwin.cc : remove unneeded include

2009-07-17 Rob Pearce<rob@bdt-home.demon.co.uk>
	* src/14bit_tmrs.cc src/14bit_tmrs.h
	  Turned the ccpcon/compare_value member pair in TMRL into a
	  linked list of CCP references, built on demand and deleted
	  when compare mode cancelled, thus fixing bug 2819395
	* src/16bit-processors.cc p16x6x.cc
	  Removed setting of tmrl->ccpcon as it no longer exists. The
	  operation was pointless anyway, as it would always be set
	  again before it became meaningful
	* regression/ccp/ccp877a.asm
	  Added regression test for dual compare mode. This is a very
	  slightly enhanced version of Roy's attachment in bug 2819395

2009-07-15 Rob Pearce<rob@bdt-home.demon.co.uk>
	* src/14bit_tmrs.cc src/14bit_tmrs.h
	  Changed around the structure of who does what when a CCP is in
	  compare mode. At the moment this should not have changed any
	  functionality, but is in preparation for fixing bug 2819395

2009-07-15 Roy Rankin <rrankin@ihug.com.au>
	* regression/i2c/p16f88.asm : position modules
	* modules/stimuli.cc : fix error causing warning message
	* src/ioports.h src/stimuli.cc src/stimuli.h
	  src/pic-processor.cc src/pic-processor.h
	  gui/gui_breadboard.h gui/gui_breadboard.cc
	  regression/p16f676/reset.asm regression/p16f676/Makefile
	  regression/run_regression.sh :
	- Fix MCLR when it can be an IO pin

2009-07-11 Roy Rankin <rrankin@ihug.com.au>
	* regression/comparator/compar_877a.stc : position modules
	* regression/interrupts_14bit/interrupts_14bit.asm : use WDT
	* regression/usart_test/usart_pir1v1.asm
	* regression/usart_test/usart_pir1v2.asm
	  regression/usart_test/eusart.asm
	  regression/i2c/p16f876a.asm : Stop run-away tests

2009-07-07 Roy Rankin <rrankin@ihug.com.au>
	+ src/pic-processor.cc src/pic-processor.h src/p18x.cc src/p18x.h :
	- Fix 18f2455 sigsegv, package size (2814946), ram and program size
	  add 18f4455 40 pin version but still no USB support
	* src/processor.cc : Remove 2^N restriction on program memory size
	* src/packages.h src/packages.cc : Make warning in assign_pin optional

2009-07-05 Roy Rankin <rrankin@ihug.com.au>
	* src/16bit-processors.cc : fix Config1H::toString
	* src/eeprom.cc : fix delete issue
	* src/pic-processor.cc src/pic-processor.h src/p16x6x.cc src/p16x6x.h
	  regression/p16f676/16f676.lkr regression/p16f676/Makefile
	  regression/p16f676/p16f676.asm regression/Makefile.am
	  regression/run_regression.sh :
	- Add p16f630, p16f676
	* src/pir.cc src/pir.h : New PIR1 register type
	* src/p16f62x.cc : fix MCLR calls
	* src/stimuli.cc src/stimuli.h : input pull-up off for analog pins
	  bug 2814950
	* src/comparator.cc : new analog mode call, fix sigsegv
	* src/ioports.cc src/ioports.h src/a2d_v2.cc : new analog mode call
	* src/a2dconverter.cc src/a2dconverter.h : new analog pin mode call,
	  16f676 mode

2009-07-04 Roy Rankin <rrankin@ihug.com.au>
	* regression/interrupts_14bit/interrupts_14bit.stc
	  regression/interrupts_16bit/interrupts_16bit.stc :
	+ terminate test when interrupts fail
	* regression/a2d/p16f819.asm : fix comment
	* regression/a2d/p16f88.asm : set vref as analog pin
	* regression/a2d/Makefile : fix "make sim"

2009-06-15 Roy Rankin <rrankin@ihug.com.au>
	* src/p18x.h src/p18x.cc src/16bit-processors.h src/16bit-processors.cc
	  src/pic-processor.h src/pic-processor.cc src/p16f62x.cc src/ioports.cc
	  src/p18x.cc src/14bit-registers.cc src/p16f8x.cc : Config word set
	- clock mode and pins, add OSCTUNE where appropriate for p18 processors
	* regression/Makefile.am regression/run_regression.sh
	  regression/p18f/reset.asm regression/p18f/Makefile : Add regression
	- test for p18 resets
	* regression/a2d/p18f1220.asm : add intrc frequency tests
	* regression/a2d/p18f4321.asm : MCLR turned off with Configword
	* regression/a2d/p16f88.asm : position test resistors

2009-06-10 Rob Pearce<rob@bdt-home.demon.co.uk>
	* src/os_dependent.cc
	  Fixed IsFileExtension so that the extension must match the end of
	  the file name and be preceeded by a dot. This is for bug 2803756
	  but not using the patch supplied as it wasn't quite semantically
	  correct.

2009-06-07 Roy Rankin <rrankin@ihug.com.au>
	* src/16bit-processors.cc src/pic-processor.h src/pic-processor.cc
	  src/p18x.cc src/14bit-processors.h src/14bit-processors.cc :
	- Add MCLR pin support to P18 processors
	* src/p16f8x.cc : Fix MCLR support
	* src/a2d_v2.cc : Remove unused variable to stop compiler warning

2009-06-01 Roy Rankin <rrankin@ihug.com.au>
	* regression/p12f675/p12f675.asm
	  regression/a2d/p18f1220.asm regression/a2d/p18f4321.asm :
	- Test that analog pins read as 0
	* regression/resistor/resistor.asm
	* regression/p18f452_ports/p18f452_ports.asm :
	- Set Analog pins to digital before tests
	* regression/a2d/p18f452.asm : set position in breadboard
	* src/ioports.h src/ioports.cc src/16bit-processors.cc
	  src/a2d_v2.h src/a2d_v2.cc src/a2dconverter.h src/a2dconverter.cc
	  src/comparator.cc src/14bit-registers.cc src/pic-ioports.cc :
	- analog pins are labeled and read as 0 (bug 1832222)
	* src/p18x.cc : remove ssp registers on p18f1220

2009-05-30 Roy Rankin <rrankin@ihug.com.au>
	* regression/comparator/compar_10f204.asm : reset vector wrong address
	* regression/p12f675/p12f675.asm : fix typos, clear analog ports at
	- end of ADC test
	* regression/Makefile.am : fix make dist
	* src/intcon.h src/intcon.cc src/pic-instructions.cc src/p12x.cc :
	- remove extraneous trace messages

2009-05-24 Roy Rankin <rrankin@ihug.com.au>
	* regression/p12f675/12f675.lkr regression/p12f675/p12f675.asm
	  regression/p12f675/Makefile regression/Makefile.am src/Makefile.am
	  regression/run_regression.sh src/p12f6xx.cc src/p12f6xx.h
	  src/pic-processor.h src/pic-processor.cc :
	- Add 12f675 and 12f629 processors and regression tests
	* src/14bit-tmrs.cc src/14bit-tmrs.h : hooks to handle stop/start of
	- TMR1 for sleep, support for TMR1 Gate Enable
	* src/comparator.cc : fixes to allow single comparator
	* src/14bit-registers.cc src/14bit-registers.h : Add OSCCAL class
	- (OSCillator CALibration) , IOC class (Interrupt On Change) and WPU
	- class (Weak Pull Up) used in P12f629/675
	* src/a2dconverter.cc src/a2dconverter.h : Add ADCON0_12F and
	- ANSEL_12F classes to support ADC for p12f675
	* src/pic-ioports.cc src/pic-ioports.h : Add PicPortGRegister port
	- class which support IOC (Interrupt On Change) register
	* src/14bit-processors.cc src/14bit-processors.h : handle MCLR pin
	-  action, remove dead code
	* src/p16f8x.cc : fix POR value for register ANSEL

2009-05-05 Roy Rankin <rrankin@ihug.com.au>
	* cli/cmd_processor.cc: revert as fix not in this file
	* gpsim/main.cc: fix "gpsim -p processor file.hex" bug # 1629719
	  load .stc or .cod file from command line without -c or -s

2009-05-05 Roy Rankin <rrankin@ihug.com.au>
	* cli/cmd_processor.cc: fix "gpsim -p processor file.hex" bug #
	  1629719
	* regression/Makefile.am: remove */*.o files on make clean

2009-05-04 Roy Rankin <rrankin@ihug.com.au>
	* src/16bit-registers.h  src/16bit-registers.cc
	  src/16bit-processors.cc  src/tmr0.cc  src/tmr0.h
	  src/p12x.cc  src/pic-registers.cc  src/12bit-processors.cc
	  src/12bit-processors.h src/14bit-processors.cc
	  src/14bit-processors.h src/16bit-processors.h
	  regression/tmr0_16bit/tmr0_16bit.asm regression/wdt/wdt_18f452.asm
	  regression/p16f84/reset.asm regression/a2d/p10f222.asm:
	- TMR0 stops during sleep - bug #502665
	* regression/a2d/p16f871.asm regression/a2d/p16f873a.asm
	  regression/a2d/p16f874a.asm:
	- bad register name in assert

2009-04-28 Roy Rankin <rrankin@ihug.com.au>
	* src/pic-registers.cc : backout part of last change which causes
	sigsegv

2009-04-28 Roy Rankin <rrankin@ihug.com.au>
	* src/pic-registers.h src/pic-registers.cc src/pic-ioports.cc
	  regression/digital_stim/digital_stim.asm:
	- OPTION_REG values not properly processed on initial reset
	  causing wrong edge detect for interrupt

2009-04-27 Roy Rankin <rrankin@ihug.com.au>
	* src/p12x.cc src/p12x.h src/pic-registers.cc:
	- For p12x processors support osccal function for internal RC
	  frequency tuning and FOSC4. Add Configuration word support
	  for IOSCFS and NOT_MCPU. Pin driving and label for
	  FOSC4/COUT/T0SC/gpio2 and MCLR/gpio3

2009-04-21 Roy Rankin <rrankin@ihug.com.au>
	* regression/instructions_12bit/instructions_12bit.asm
	  regression/a2d/p10f222.asm src/p12x.cc src/p12x.h:
	- Fix pullup on gpio3 on all p12x processors

2009-04-20 Roy Rankin <rrankin@ihug.com.au>
	* src/a2dconverter.h: Fix sigsegv introduced in last patch

2009-04-20 Roy Rankin <rrankin@ihug.com.au>
	* src/pic-processor.cc src/pic-processor.h src/p12x.cc src/p12x.h
	  src/a2dconverter.cc src/a2dconverter.h regression/a2d/10f222.lkr
	  regression/a2d/p10f222.asm regression/a2d/Makefile
	  regression/run_regression.sh:
	- Add P10F220 and P10F222 processors

2009-03-23 Roy Rankin <rrankin@ihug.com.au>
	* configure.ac: set release 0.23.9
	* ANNOUNCE: fix typo

2009-03-18 Roy Rankin <rrankin@ihug.com.au>
	* extras/lcd/configure.in: bump release number

2009-03-02 Roy Rankin <rrankin@ihug.com.au>
	* gpsim/main.cc: expand extent of try
	* gpsim.spec.in: improve utf8 conversion of AUTHORS file
	* ANNOUNCE: update for 0.23.0

2009-03-01 Borut Razem <borut.razem@siol.net>
	* gpsim/main.cc, src/errors.h, src/errors.cc, src/uart.cc, src/icd.cc,
	  src/a2d_v2.cc, src/pic-processor.h, src/processor.cc,
	  gui/gui_menu.cc, cli/scan.ll, cli/socket.cc, cli/input.cc,
	  cli/input.h, doc/gpsim.lyx: undone changes I made yesterday: libgpsim
	  functions now throw FataError exception, which is catched by main()

2009-02-28 Borut Razem <borut.razem@siol.net>
	* gpsim/main.cc, src/icd.cc, src/processor.cc, gui/gui_menu.cc,
	  cli/scan.ll, cli/socket.cc, cli/input.cc, cli/input.h:
	  use atexit() to execute exit_gpsim() when exiting to solve
	  Win32 libgpsim.dll problem.

2009-02-28 Roy Rankin <rrankin@ihug.com.au>
	* gpsim.spec.in: update
	* src/trace.cc: fix segfualt (bug 1490171)
	* src/registers.cc src/pic-processor.h: fix pcl setting and segfault
	  (bug 1642109)
	* src/eeprom.cc: fix segfault (bug 1823171)

2009-02-19 Roy Rankin <rrankin@ihug.com.au>
	* gui/gui_main.cc: set LC_NUMERIC locale to standardize IO
	  (bug 1832702)

2009-02-18 Roy Rankin <rrankin@ihug.com.au>
	* gui/gui_src_asm.cc: Handle non uft8 characters is Source Browser
	window (bugs 1869795, 2579637)

2009-02-17 Roy Rankin <rrankin@ihug.com.au>
	* src/os_dependent.cc: Fix loading module libraries
	* cli/parse.yy cli/cmd_attach.cc doc/gpsim.lyx:
	    fix help for attach and segfault (bug 2556045)
	* src/p16x6x.cc src/p16f62x.cc src/ioports.cc:
	    debuging output only if verbose set

2009-02-14 Roy Rankin <rrankin@ihug.com.au>
	* cli/parse.yy: fix segfault (bug 2556041)

2009-02-14 Roy Rankin <rrankin@ihug.com.au>
	* src/expr.cc src/protocol.cc src/operator.cc src/ValueCollections.h
	  src/protocol.h src/icd.cc src/comparator.cc src/value.cc
	  src/processor.cc src/16bit-instructions.cc modules/usart.cc
	  gui/settings_exdbm.cc gui/gui.h: Changes to compile with GCC 4.4

2009-02-14 Roy Rankin <rrankin@ihug.com.au>
	* regression/Makefile.am: correction on file list for make dist

2009-02-14 Roy Rankin <rrankin@ihug.com.au>
	* gpsim/main.cc
	  src/icd.cc src/processor.cc gui/gui_menu.cc
	  cli/scan.ll cli/socket.cc cli/input.cc cli/input.h:
	    Do not exit from library routines
	* regression/Makefile.am
	    make clean, cleans files in regression sub-directories
	    fix list of files so make dist works

2008-12-26 Borut Razem <borut.razem@siol.net>
	* extras/lcd/lcdgui.cc, modules/led.cc, gui/gui_profile.cc:
	  applied patch 2458749: segfault in gdk_color_alloc(),
	  thanks to Don Wooton
	* src/makefile.mingw, src/src.vcproj: added a2d_v2.cc and a2d_v2.h

2008-12-22 Roy Rankin <rrankin@ihug.com.au>
	* regression/a2d/18f1220.lkr regression/a2d/18f4321.lkr
	  regression/a2d/p18f1220.asm regression/a2d/p18f4321.asm
	  regression/a2d/Makefile regression/run_regression.sh
	  src/p18x.h src/16bit-processors.cc
	  src/a2d_v2.h src/Makefile.am src/a2d_v2.cc
	  src/p18x.cc src/a2dconverter.cc src/16bit-processors.h :
	    Add new style A2D converter with adcon2 register which
	    supports up to 16 channels

2008-12-07 Roy Rankin <rrankin@ihug.com.au>
	* src/16bit-registers.h src/p16f87x.cc src/p16f87x.h
	  src/p16x7x.h src/a2dconverter.h src/p16x7x.cc src/p16f8x.h
	  src/16bit-registers.cc src/p16f8x.cc src/a2dconverter.cc
	  src/16bit-processors.h :
	    Consolidate ADCON0_withcpp, ADCON0_16 and ADCON0 classes
	    to just ADCON0. Fix ADCON1::setNumberOfChannels() to allow
	    number of channels to be increased.

2008-12-02 Roy Rankin <rrankin@ihug.com.au>
	* src/14bit-registers.h src/dspic/dspic-instructions.cc
	  src/pic-processor.cc src/pir.cc src/16bit-instructions.h
	  src/comparator.cc src/hexutils.h src/14bit-registers.cc
	  src/16bit-registers.cc modules/stimuli.cc :
	    Fix GCC 4.3.0 warnings

2008-09-21 Borut Razem <borut.razem@siol.net>
	* plat/win32/gpsim.nsi, doc/gpsimWin32.html:
	  updated for libpng-1.2.29, win_iconv_dll-tml-20080320, atk_1.22.0-2_win32,
	  gtk+_2.14.2-1_win32, cairo-1.6.4-2, pango_1.20.5-2_win32, glib_2.18.1-1_win32

2008-09-20  Rob Pearce <rob@bdt-home.demon.co.uk>
	* src/intcon.cc src/intcon.h src/pir.cc src/pir.h
	  src/p16x7x.cc
	    Fixed handling of peripheral interrupts during ISR execution on 16-bit with
	    priority enables, so that the new interrupt will be handled after the RETFIE
	    This involved changing the PIR::interrupt_status() and dependents to return
	    a bit-map of priorities rather than a simple boolean.

2008-09-17  Rob Pearce <rob@bdt-home.demon.co.uk>
	* src/intcon.cc :
	    Fixed response to low priority interrupts during high priority ISR (i.e. it
	    no longer runs the low-pri ISR immediately)
	* src/16bit-processors.cc src/intcon.cc src/intcon.h
	  regression/interrupts_16bit/priority.asm regression/analog_stim/p18f452.asm
	  regression/a2d/p18f452.asm
	    Fixed handling of interrupts during ISR execution on 16-bit, at least for the
	    non-priority case, so that the new interrupt will be handled after the RETFIE
	    (as already worked on 14-bit). Also added test of priority nesting, which
	    currently doesn't test this fix (it uses RBIF, which already worked). Also
	    fixed a couple of ADC regression tests that failed to acknowledge the interrupt
	    (due to a typo) and thus only passed because this condition was buggy.

2008-09-17  Rob Pearce <rob@bdt-home.demon.co.uk>
	* src/ssp.cc :
	    Corrected SPI transfer complete behaviour so that SSPIF is set on completion
	    of a master mode transfer regardless of the SSPOV state. (Confirmed this
	    behaviour on an 18F2321)
	* src/14bit-tmrs.cc :
	    Made some commented out debug code available with higher verbosity, for testing

2008-09-14 Borut Razem <borut.razem@siol.net>
	* configure.ac:
	  fixed bug #1698566: missing libpopt header is unnoticed by configure

2008-08-29  Rob Pearce <rob@bdt-home.demon.co.uk>
	* src/14bit-tmrs.cc src/14bit-tmrs.h src/pir.h src/16bit-processors.cc
	  src/p16x6x.cc src/p18x.cc regression/ccp/ccp_877a.asm :
	    Changed the CCPCON class to not use pir_set, since this broke its
	    ability to be duplicated. It now refers to a specific PIR register,
	    meaning that the second CCP on a 16F87x or similar can actually
	    generate the right interrupt.
	    Added tests for this in the CCP_877a regression test

2008-08-26  Rob Pearce <rob@bdt-home.demon.co.uk>
	* src/processor.cc src/processor.h src/sim_context.cc src/cod.cc
	  src/16bit-processors.h gui/gui_profile.cc :
	    Corrections to use of Processor::program_memory_size() so that all
	    of them expect it to be instruction words, not byte addresses.

2008-08-23  Rob Pearce <rob@bdt-home.demon.co.uk>
	* regression/interrupts_16bit/(interrupts_16bit.asm, priority.asm)
	  regression/run_regression.sh  :
	    Enhance and enable regression tests for the 16bit core prioritised interrupts
	* src/intcon.cc :
	    Corrected peripheral interrupts to use the right vectors when IPEN is set

2008-08-06  Rob Pearce <rob@bdt-home.demon.co.uk>
	* src/intcon.cc :
	    Corrected low priority non-peripheral interrupts to obey the GIEL bit
	* regression/interrupts_16bit/(18f2321.lkr, Makefile, interrupts_16bit.asm,
	  interrupts_16bit.stc, priority.asm, priority.stc) :
	    First stab at some regression tests for the 16bit core prioritised interrupts

2008-08-04 Borut Razem <borut.razem@siol.net>
	* src/protocol.cc, src/i2c-ee.cc, src/eeprom.cc, src/pic-processor.cc.
	  src/gpsim_object.cc, src/comparator.cc, src/value.h, src/p12x.cc,
	  src/value.cc, src/cod.cc, config_win32.h.in, cli/scan.ll,
	  cli/command.cc, cli/input.cc, plat/win32/libgpsim.def:
	  MSVC sync, enable compilation on VC 2008

2008-08-02 Borut Razem <borut.razem@siol.net>
	* gpsim/main.cc, src/gpsim_interface.h, src/icd.h, src/modules.h,
	  src/i2c-ee.cc, src/ui.h, src/trace.h, src/ui.cc, src/icd.cc,
	  src/modules.cc, src/trace.cc, src/cmd_manager.h, modules/usart.cc,
	  modules/logic.cc, modules/logic.h, gui/gui_src.cc, gui/gui_symbols.cc
	  gui/gui_src.h, gui/gui_regwin.cc, gui/gui_trace.cc, gui/gui_profile.cc
	  gui/gui_src_asm.cc, gui/gui_dialog.cc, gui/gui_menu.cc, gui/gui_stack.cc
	  gui/gui_watch.cc, gui/gui_object.h, gui/settings_exdbm.cc,
	  gui/gui_src_opcode.cc, gui/gui.h, gui/gui_breadboard.cc, ChangeLog,
	  xpms/startp.xpm, xpms/pc.xpm, xpms/break.xpm, xpms/stopp.xpm,
	  xpms/canbreak.xpm, cli/misc.h, cli/socket.cc, cli/ui_gpsim.h, cli/input.cc,
	  cli/ui_gpsim.cc, plat/win32/icd.cc:
	  fixed gcc warnings "warning: deprecated conversion from string constant to 'char*'"

2008-08-02  Rob Pearce <rob@bdt-home.demon.co.uk>
	* src/14bit-registers.cc, src/16bit-registers.cc :
	    Fixed behaviour of PCLATH and PCL :
	        - Setting PC from GUI no longer changes PCLATH on 16-bit cores
	        - Setting PCLATH from GUI no longer changes PC
	* src/p18x.cc :
	   Annotation - I think porta4 is defined wrong
	* src/pir.cc, src/pir.h, src/intcon.cc, src/intcon.h, src/16bit-processors.cc :
	    Support for interrupt priority on 16-bit core peripherals
	* src/16bit-processors.cc :
	    Fix TMR0 external inputs on 16-bit cores (T0CKI was not being connected)

2008-07-30 Borut Razem <borut.razem@siol.net>
	* regression/run_regression.sh:
	  set GPSIM_MODULE_PATH=$(pwd)/../modules/.libs so that the correct
	  libgpsim_modules.so is loaded during regression test execution on
	  *nix platforms

2008-07-28 Borut Razem <borut.razem@siol.net>
	* cli/cmd_symbol.cc, gui/gui_breadboard.cc, modules/led.cc:
	  enabled compilation on Fedora 9, gcc 4.3.0, fixed gcc error:
	  must #include <typeinfo> before using typeid

2008-06-26  Rob Pearce <rob@bdt-home.demon.co.uk>
	* src/uart.cc, regression/usart_test/eusart.asm :
	    Added regression test for (and fixed) EUSART sync break operation.

2008-06-05  Scott Dattalo <scott@dattalo.com>
	* src/os_dependent.cc:
	  Now the library extension is appended to library names if the raw library
	  name fails to load

2008-06-05  Scott Dattalo <scott@dattalo.com> for Steffen Joeris <Steffen.Joeris@skolelinux.de>
	* src/modules.h, src/operator.cc, src/processor.h, src/gpsim_object.cc
	* src/value.h, src/modules.cc, src/value.cc, src/processor.cc, modules/switch.cc
	* gui/gui_src.cc, gui/gui_symbols.cc, gui/gui_regwin.cc, gui/gui_stack.cc
	* gui/settings_exdbm.cc, cli/cmd_x.cc, cli/cmd_clear.cc
	Fixups for gcc-4.3

2008-06-22  Rob Pearce <rob@bdt-home.demon.co.uk>
	* src/uart.cc, src/uart.h, regression/usart_test/Makefile, regression/run_regression.sh,
	  regression/usart_test/eusart.asm, regression/usart_test/18f2321.lkr:
	    Added regression test for (and fixed) EUSART operation in BRG16 mode.

2008-06-08  Rob Pearce <rob@bdt-home.demon.co.uk>
	* src/uart.cc, src/uart.h, p18x.cc:
	    Initial support for EUSART, as part of the existing usart class. Has been
	    regression tested in legacy mode only.

2008-06-05  Scott Dattalo <scott@dattalo.com>
	* src/value.h, src/value.cc, src/16bit-instructions.cc
	  C++ cleanup - char * is now const char * in many places

2008-06-01  Rob Pearce <rob@bdt-home.demon.co.uk>
	* src/pic-processor.cc, src/pic-processor.h, p18x.cc, p18x.h:
	    Initial attempt at providing support for the PIC18F4321. The same
	    issues are present as per the 18F2321.
	* src/16bit-registers.cc, gui/gui_src_asm.cc:
	    Bug fixes - "run to here" now updates the source browser PC indicator,
	    and "set PC here" now works properly on 16bit processors
	* gui/gui_stopwatch.cc:
	    No actual code change, but some comments regarding a suspicious looking
	    sequence of operations.
	* src/16bit-processors.cc, src/16bit-processors.h, p18x.h:
	    Fixed RAM sizes of 18F series processors

2008-05-31  Rob Pearce <rob@bdt-home.demon.co.uk>
	* src/pic-processor.h, src/16bit-processors.h, p18x.h,
	  src/16bit-instructions.cc, src/pic-instructions.cc, src/14bit-registers.cc:
	    Split out the _16BIT_PROCESSOR_ base type into _PIC17_PROCESSOR_ and
	    _PIC18_PROCESSOR_ because nearly every place that tested it should have
	    treated them differently. This led to some awkward switch cases where
	    all PIC18 devices were listed in one block and all PIC17s in another
	    (and which could easily be overlooked and cause pain when adding new
	    devices). These are now simple and generic.
	* src/pic-processor.cc, src/pic-processor.h, p18x.cc, p18x.h:
	    Initial attempt at providing support for the PIC18F2321. The USART is
	    wrong (missing BAUDCON and SPBRGH), as is the ADC (ADCON2 missing, not
	    enough channels) and the OSCTUNE register is missing. Also the RAM is
	    too big.
	* src/16bit-registers.cc regression/instructions_16bit/instructions_16bit.asm
	    Fixed a bug in the TBLPTR decrement on 256 byte boundaries, and added
	    regression test for it.

2008-05-20  Rob Pearce <rob@bdt-home.demon.co.uk>
	* src/14bit-tmrs.cc:
	    Fix TMR1 behaviour around CCP compare events, remove incorrect
	    adcon interaction, enable CCP output drive
	* src/p16f62x.cc:
	    Enable CCP onto the correct port pin
	* regression/ccp_628/* regression/run_regression.sh regression/Makefile.am:
	    Add regression tests for these fixes, and others
	Changes are for bug 1967803 and to repair 679540, plus tests for 1811305, 1652549

2008-04-05  Scott Dattalo <scott@dattalo.com>
	* src/gpsim_interface.h, src/interface.cc, cli/cmd_stopwatch.cc,
	  cli/cmd_frequency.cc, cli/cmd_dump.cc, cli/cmd_list.cc,
	  cli/command.cc, cli/cmd_step.cc, cli/command.h:
	 The step and step over commands are now directed through the
	 gpsim interface instead through the currently active processor.

2008-01-13 Borut Razem <borut.razem@siol.net>
	* plat/win32/gpsim.nsi: added StartMenu page
	* configure.ac: corrected URL

2008-01-10 Borut Razem <borut.razem@siol.net>
	* plat/win32/gpsim.nsi, plat/win32/makefile.migw: changed NSIS
	  installation
	* doc/gpsimWin32.html: fixed typo

2007-12-23 Borut Razem <borut.razem@siol.net>
	* doc/gpsimWin32.html: fixed typo; jpeg and tiff dependencies
	* plat/win32/gpsim.nsi: added jpeg62.dll and libtiff3.dll
	* doc/gpsim_svn.html: corrected the URL of svn repository,
	  thanks to Graeme Jury
	* doc/*.html: make WEB pages XHTML 1.0 Transitional copliant

2007-12-17 Roy Rankin <rrankin@ihug.com.au>
	* src/14bit-tmrs.h src/14bit-tmrs.cc: Add TMR1 external crystal
	  simulation
	* regression/tmr1_16bit/tmr1_16bit.asm regression/tmr1_16bit/Makefile:
	- Add tests for external crystal and Fosc/4,
	  lower frequency to speed up test time
	* regression/Makefile.am regression/run_regression.sh:
	- Run tmr1_16bit as part of regression tests
	* doc/gpsim.lyx: Add TMR1 external drive documentation

2007-12-09 Borut Razem <borut.razem@siol.net>
	* doc/gpsimWin32.html: NSIS v2.33, fontconfig-2.4.2-tml-20071015,
	  gettext-runtime-0.17, glib-2.14.4, gtk+-2.12.3, pango-1.18.3
	* doc/makefile.mingw: ignore errors
	* plat/gpsim.nsi: updated for gtk+-2.12.3
	* plat/win32/gpsim.def: MSVC sync

2007-12-02 Roy Rankin <rrankin@ihug.com.au>
	* regression/wdt/18f452.lkr regression/wdt/16f88.lkr
	  regression/wdt/16f628.lkr regression/wdt/16c64.lkr
	  regression/wdt/wdt_16c64.asm regression/wdt/nwdt_18f452.asm
	  regression/wdt/wdt_18f452.asm regression/wdt/nwdt_16f628.asm
	  regression/wdt/nwdt_16f88.asm regression/wdt/wdt_16f88.asm
	  regression/wdt/wdt_16f628.asm regression/wdt/Makefile
	  regression/wdt/nwdt_16c64.asm regression/Makefile.am
	  regression/run_regression.sh:
	- Add regression tests for Watchdog Time
	* regression/p16f84/reset.asm: Sleep continues on WDT expire
	* src/Makefile.am src/rcon.h src/16bit-registers.h: RCON moved to rcon.h
	* src/pic-processor.cc src/pic-processor.h src/16bit-processors.cc
	  src/pic-registers.cc src/14bit-registers.h src/p16f8x.h
	  src/p16f8x.cc:  WDT and configuration fixes
	* src/processor.cc: Frequency change updates WDT
	* src/14bit-registers.cc: WDTCON functions added,
	  Status register rcon support
	* src/16bit-instructions.cc: Implement Sleep instruction

2007-11-25 Roy Rankin <rrankin@ihug.com.au>
	* src/14bit-tmrs.cc: Fix TMR2 BUG message on reset

2007-11-09 Borut Razem <borut.razem@siol.net>
	* modules/usart.cc> fixed bug #1828634: SVN does not build with
	  --disable-gui

2007-10-21 Roy Rankin <rrankin@ihug.com.au>
	* modules/switch.cc: Fix compiler warning
	* modules/led.cc: Fix core dump when no GUI

2007-10-21 Roy Rankin <rrankin@ihug.com.au>
	* doc/gpsim.lyx: Add LED doc, new switch state values
	* modules/switch.cc: State attribute given values open and closed
	* modules/led.cc, modules/led.h: Add color for simple LED
	* regression/switch_test/switch_test.asm: test new state values
	* examples/modules/led_test/led_mod.stc: Add position, simple green LED

2007-10-20  Scott Dattalo <scott@dattalo.com>
	* src/pic-processor.cc: Fixed the 'Step-Over' bug that was
	preventing the gui from updating properly.
	* regression/rt.sh: Added an echo print that will display which
	regression test is currently running. This is commented out for
	now...

2007-10-18  Scott Dattalo <scott@dattalo.com>
	* src/16bit-processors.cc: Fixed a printf format specifier bug.

2007-10-18  Scott Dattalo <scott@dattalo.com>
	* gui/gui_src.h, gui/gui_src_asm.cc: Removed #if 0'd code. Made
	the dependency on the "new" source browser permanent.

2007-10-17 Borut Razem <borut.razem@siol.net>
	* configure.ac: added -Wall gcc command line option to CFLAGS and
	  CXXFLAGS

2007-10-16 Borut Razem <borut.razem@siol.net>
	* src/value.cc, src/trace.cc, modules/stimuli.cc, gui/gui_trace.cc,
	  gui/gui_profile.cc, gui/gui_menu.cc, gui/gui_scope.cc, configure.ac,
	  config_win32.h.in:
	  introduced PRINTF_GINT64_MODIFIER which defines the printf modifier
	  for gint64 and guint64 types

2007-10-14 Borut Razem <borut.razem@siol.net>
	* src/p16x6x.h, src/p16x6x.cc, src/eeprom.cc, src/pic-processor.cc,
	  src/p16f62x.cc, src/12bit-processors.cc, src/pic-processor.h,
	  src/p12x.cc, src/14bit-processors.cc:
	  fixed duplicatd sfr deletion, code cleaning
	* plat/win32/libgpsim.def: MSVC sync
	* src/icd.cc, src/bitlog.cc, gui/gui_object.cc, eXdbm/eXdbm.c,
	  cli/cmd_help.cc: fixed trivial gcc 4.1.2 warnings

2007-10-14 Roy Rankin <rrankin@ihug.com.au>
	* src/value.cc: Allow Float::set to take Value type Integer
	* src/modules.h src/modules.cc gui/gui_breadboard.cc:
	- reinstate operation of breadboard "Add library", "Add module" and
	  "Save Configuration" buttons and module attributes.

2007-10-13 Borut Razem <borut.razem@siol.net>
	* src/gpsim_interface.h, src/ioports.h, src/gpsim_object.h,
	  src/dspic/dspic-instructions.h, src/ui.h, src/processor.h,
	  src/pir.h, src/trace.h, src/program_files.h, src/pic-processor.h,
	  src/registers.h, src/stimuli.h, modules/i2c.h, modules/led.h,
	  gui/gui_symbols.cc, gui/gui_src.h, gui/gui_regwin.cc,
	  gui/gui_menu.cc, gui/gui_scope.cc, gui/gui.h, cli/socket.cc:
	  fixed virtual functions but non-virtual destructor warnings
	* src/modules.h, src/p16x6x.cc, src/pic-processor.cc, src/p16f62x.cc,
	  src/12bit-processors.cc, src/pic-processor.h, src/p12x.cc, src/modules.cc
	  src/processor.cc, src/14bit-processors.cc, src/pic-instructions.cc,
	  src/pic-processor.cc:
	  fixed gcc warning: dereferencing type-punned pointer will break
	  strict-aliasing rules

2007-10-13 Roy Rankin <rrankin@ihug.com.au>
	* src/i2c-ee.h src/i2c-ee.cc modules/i2c-eeprom.h modules/i2c-eeprom.cc
	  cli/cmd_dump.cc cli/cmd_load.cc: Fix eeprom address symbols

2007-10-10  Scott Dattalo <scott@dattalo.com>
	* modules/i2c-eeprom.cc, cli/cmd_dump.cc, src/pic-processor.cc,
	src/symbol.cc, src/i2c-ee.cc:
	Fixed errors that Borut uncovered during the clean up process.

2007-10-09 Borut Razem <borut.razem@siol.net>
	* src/symbol.cc: fixed the fixed warnig ;-)

2007-10-07 Borut Razem <borut.razem@siol.net>
	* cli/cmd_attach.cc, cli/cmd_dump.cc, cli/cmd_dump.h,
	  gui/gui_breadboard.cc, gui/gui_scope.cc, gui/gui_scope.h,
	  gui/gui_src_asm.cc, gui/gui_stack.cc, gui/gui_watch.cc,
	  modules/i2c.h, modules/stimuli.cc, modules/stimuli.h,
	  src/14bit-registers.cc, src/14bit-tmrs.cc, src/16bit-processors.cc,
	  src/bitlog.cc, src/eeprom.cc, src/hexutils.cc, src/hexutils.h,
	  src/modules.cc, src/p16f8x.cc, src/packages.cc, src/pic-ioports.cc,
	  src/pic-processor.cc, src/pic-processor.h, src/processor.cc,
	  src/processor.h, src/registers.cc, src/stimuli.cc, src/symbol.cc,
	  src/trace.cc: fixed trivial gcc warnings
	* doc/gpsimWin32.html: generic readline

2007-10-6  Scott Dattalo <scott@dattalo.com>
	* regression/switch_test/switch_test.asm,
	  regression/instructions_14bit/branching.asm:
	  - WDT was timing out.
	* src/pic-processor.cc, src/pic-processor.h:
	  - Added 12f508, 12f509, and 12f510
	  - Fixed I/O reset bug
	  - WDT is now placed in the processor's symbol table.
	* src/p12x.cc, src/p12x.h:
	  - Added 12f508, 12f509, and 12f510 (although the '510's
	  comparator and A2D are not supported.)
	* cli/cmd_symbol.cc:
	  - Module symbol tables can now be displayed independently of the
	  global symbol table
	* cli/parse.yy:
	  - The parser was quiting gpsim if the dump eeprom command failed.

2007-09-30 Borut Razem <borut.razem@siol.net>
	* doc/gpsimWin32.html: glib-2.14.1, atk-1.20.0, pango-1.18.2, cairo-1.4.10,
	  NSIS v2.31
	* plat/win32/gpsim.nsi: updated
	* plat/win32/libgpsim.def: MSVC sync

2007-09-17 Roy Rankin <rrankin@ihug.com.au>
	* cli/cmd_symbol.cc: symbols dumped as module.symbol with better
	    format, don't dump line number symbols.
	* gui/gui_symbols.cc: symbols dumped as module.symbol.
	* src/registers.cc: Add module name in response to query array value.
	* src/i2c-ee.h, src/i2c-ee.cc, modules/i2c-eeprom.cc: Add
	    RegisterCollection to allow command line viewing & change
	    of EEPROM cells.
	* doc/gpsim.lyx:Document new EEPROM functionality, improve scope
	    window documentation.

2007-09-16 Roy Rankin <rrankin@ihug.com.au>
	* cli/cmd_break.cc: unless verbose set, do not output assert messages
	  when loading them to avoid user concusion and masking of error
	  messages.
	* regression/rt.sh: simplified due to above change.

2007-09-13 Roy Rankin <rrankin@ihug.com.au>
	* src/hexutils.cc src/hexutils.h: read/write Intel hex files from/to
	    register arrays. File format not dependant on endian of processor.
	* src/i2c-ee.h src/i2c-ee.cc src/eeprom.cc src/eeprom.h: EEPROM given
	    register size.
	* modules/i2c-eeprom.h modules/i2c-eeprom.cc: .eeprom symbol added so
	    dump/load can converse with module
	* cli/cmd_load.h cli/cmd_load.cc cli/cmd_dump.h cli/cmd_dump.cc
	  cli/parse.yy: add EEPROM dump/load commands.
	* doc/gpsim.lyx: spelling corrections, document new load and dump
	  commands, improve EEPROM documentation.
	* regression/i2c/p16f876a.asm: Add tests for EEPROM dump/load.

2007-09-02 Borut Razem <borut.razem@siol.net>
	* plat/win32/libgpsim.def: MSVC sync
	* src/attributes.cc, src/gpsim_time.cc, src/gpsim_time.h:
	  create stop_watch object dynamically to overcome the static object
	  creation sequence dependency on the C++ compiler implementation
	* src/16bit-instructions.cc, src/pic-instructions.cc,
	  src/pic-instructions.h, src/pic-instructions.h,
	  src/processor.cc, src/processor.h, src/dspic/sdpic-instructions.cc:
	  each processor owns its own 'bad_instruction' object
	* src/symbol.cc, src/symbol.h: code cleaning
	* doc/snap_header.html: corrected ChangeLog link

2007-08-28 Roy Rankin <rrankin@ihug.com.au>
	* gui/gui_breadboard.cc: module settings fix for new symbol table
	* gli/cmd_dump.cc: fix detection of invalid registers in register dump

2007-08-26 Roy Rankin <rrankin@ihug.com.au>
	* gui/gui_symbols.cc: fix memory leak, re-enable filtering
	* gui/gui_breadboard.h gui/gui_breadboard.cc: breadboard need not be
	+     running on start of gpsim to work
	* regression/resistor/resistor.asm: position resistors

2007-08-21 Roy Rankin <rrankin@ihug.com.au>
	* modules/usart.cc modules/switch.cc modules/paraface.cc
	* modules/led.cc modules/i2c-eeprom.h modules/video.cc
	* modules/resistor.cc modules/push_button.h modules/stimuli.cc
	* modules/logic.cc modules/logic.h modules/i2c-eeprom.cc
	* modules/paraface.h modules/led.h modules/video.h
	* modules/push_button.cc modules/resistor.h modules/encoder.cc
	* modules/encoder.h modules/stimuli.h gui/gui_breadboard.h
	* gui/gui_breadboard.cc: fix extra xpos, ypos in symbol table,
	+ fix issues in deleting modules including core dumps

2007-08-09 Roy Rankin <rrankin@ihug.com.au>
	* src/p12x.cc: Fix eeprom regression introduced by last change

2007-07-29  Scott Dattalo <scott@dattalo.com>
	* cli/cmd_break.cc: Fixed bug in expression parsing of assertions.
	* cli/parse.yy, src/value.h, src/value.cc: playing with a 'call' command.
	* src/symbol.cc: Symbol type is now shown in a symbol dump.
	* src/stimuli.cc, src/stimuli.h: Added 'analog sinks'. These are
	like digital sinks except they have the added capability of
	directing a signal to more than one object.
	* src/pic-processor.cc, src/pic-processor.h: Added the 10F202 and 10F204
	* src/tmr0.cc: Fixed bug in computing current TMR0 value.
	* src/12bit-processors.cc:
	  - option register wasn't accessible from command line
	  - Config word wasn't handled properly.
	* src/p12x.cc, src/p12x.h
	  - Added P12bitBase, this made it somewhat easier to add the 10F
	  series.
	  - Added the 10F200, 10F202, 10F204 and 10F206 (only '204 was
	  tested)
	  - Added comparator support for the 10F204 and 10F206
	* regression/comparator/compar_10f204.asm,
	regression/comparator/10f204.lkr,
	regression/comparator/Makefile, regression/run_regression.sh:
	- Added a regression test for the 10F204.

2007-07-22 Rob Pearce <rob@bdt-home.demon.co.uk>
	* modules/usart.cc modules/usart.h doc/gpsim.lyx:
	  Added a "hex" attribute to the usart module to force the display to
	  show all bytes as hex, for use with pure binary data simulations.

2007-07-15 Roy Rankin <rrankin@ihug.com.au>
	* src/pic-processor.cc src/pic-processor.h src/p16f8x.h src/p16f8x.cc
	  regression/ccp/16f819.lkr regression/ccp/ccp_819.asm
	  regression/ccp/Makefile regression/a2d/16f819.lkr
	  regression/a2d/p16f819.asm regression/a2d/Makefile
	  regression/run_regression.sh regression/Makefile.am
	  regression/i2c/16f819.lkr regression/i2c/Makefile
	  regression/i2c/p16f819.asm:
	- Add P16f818 and P16f819 processors

2007-07-10 Roy Rankin <rrankin@ihug.com.au>
	* src/a2dconverter.cc: add comments for setup functions

2007-04-14 Borut Razem <borut.razem@siol.net>
	* plat/win32/libgpsim.def, plat/win32/Install.vcproj: MSVC sync
	* cli/cmd_module.cc, gui/gui_stack.c, src/modules.cc, src/modules.h,
	  src/packages.cc, src/registers.cc, src/sim_context.cc,
	  src/symbol.cc, src/symbol.h: fixes to make gpsim compile on MSVC, but
	  it still doesn't run due to object construction / destruction
	  sequence problems...

2007-03-27  Scott Dattalo <scott@dattalo.com>
	* cli/cmd_break.cc, src/gpsim_object.h, src/breakpoints.h,
	src/registers.cc, src/registers.h, src/breakpoints.cc,
	gui/gui_regwin.cc
	- Added break on register change feature. From the command line:
	gpsim> break ch myvar
	This sets a breakpoint on the register 'myvar' and will halt
	execution whenever a write to this register changes the contents
	of myvar.
	- Added another menu item to the register window menu to support
	the break on change breakpoint.

2007-03-25 Martin Habets <errandir_news@mph.eclipse.co.uk>
	* src/p18x.cc:
	- Added I2C support to pic18f2455.
	- Fixed pin 18 on the pic18f2455.

2007-03-20 Martin Habets <errandir_news@mph.eclipse.co.uk>
	* src/16bit-instructions.cc, src/p18x.cc, src/p18x.h,
	src/pic-instructions.cc, src/pic-processor.cc, pic-processor.h:
	Added support for the p18f2455.

2007-03-20  Scott Dattalo <scott@dattalo.com>
	* src/16bit-processors.cc, src/intcon.cc, src/pic-ioports.h,
	src/intcon.h, src/pic-ioports.cc, src/14bit-processors.cc:
	- PortB now writes intcon bits via a ptr to an intcon
	register. Previously, PortB obtained the intcon pointer from the
	Processor class

2007-03-15 Borut Razem <borut.razem@siol.net>
	* src/symbol.h: added #include "exports.h" to make it compile on WIN32
	* plat/win32/gpsim.nsi: added extras\graphic_lcd\examples\sed1520\*
	  and extras\graphic_lcd\examples\ssd0323\* to the package

2007-03-14  Scott Dattalo <scott@dattalo.com>
	* src/dspic/dspic-registers.cc: There was no implementation
	defined for the Status register constructor.

2007-03-14  Scott Dattalo <scott@dattalo.com>
	* src/16bit-processors.cc, src/intcon.cc, src/pic-ioports.h,
	src/intcon.h, src/pic-ioports.cc, src/registers.h,
	src/16bit-processors.h:
	- Added the concept of a 'bit sink' to the SFR registers. This
	allows arbitrary clients to associate themselves with arbitrary
	bits in an SFR. More work needs to be done, but this is used at
	the moment to control port B pull up resistors on the 16-bit core.

2007-03-07  Scott Dattalo <scott@dattalo.com>
	* src/pic-processor.cc, src/trace.cc:
	Moved the ResetTraceObject from pic-processor.cc to trace.cc
	(yesterday's comment on this was not completely true!)
	* src/stimuli.cc: Resolved an ambiguity with pullup resistors on
	I/O pins.

2007-03-06  Scott Dattalo <scott@dattalo.com>
	* src/pic-processor.cc, src/trace.cc, src/trace.h:
	Moved the ResetTraceObject from pic-processor.cc to trace.cc
	* src/value.cc: Value objects now remove themselves from the
	symbol table when they're destructed.
	* src/symbol.cc, src/stimuli.cc, src/packages.cc, src/modules.cc,
	src/cod.cc, src/breakpoints.cc, src/attributes.cc,
	modules/stimuli.cc, modules/stimuli.h, gui/gui_breadboard.cc,
	cli/cmd_attach.cc:
	- printf debug clean up.

2007-03-05  Scott Dattalo <scott@dattalo.com>
	* src/ssp.cc: Removed some printf debug code.

2007-02-25  Scott Dattalo <scott@dattalo.com>
	* src/modules.h, src/symbol.cc, src/modules.cc, cli/cmd_module.cc:
	The 'module' and 'module list' commands work again.

2007-02-25  Scott Dattalo <scott@dattalo.com>
	* src/16bit-processor.cc: Bug in config memory construction was
	causing segv. Also, added more descriptions to the 16bit processor
	config words.

2007-02-22  Scott Dattalo <scott@dattalo.com>
	* gpsim/main.cc, regression/instructions_14bit/branching.asm,
	src/p16x6x.h, src/pic-instructions.h, src/ioports.h,
	src/comparator.h, src/p16x6x.cc, src/p16f87x.cc, src/p16f87x.h,
	src/16bit-processors.cc, src/14bit-tmrs.h,
	src/pic-instructions.cc, src/dspic/dspic-registers.cc,
	src/processor.h, src/stimuli.cc, src/eeprom.cc,
	src/pic-processor.cc, src/pir.cc, src/registers.cc, src/uart.cc,
	src/p16f62x.cc, src/uart.h, src/p16x7x.h, src/tmr0.cc, src/pir.h,
	src/ssp.cc, src/tmr0.h, src/ioports.cc, src/psp.cc,
	src/14bit-tmrs.cc, src/comparator.cc, src/p16x7x.cc,
	src/12bit-processors.cc, src/p12x.cc, src/pic-processor.h,
	src/sim_context.cc, src/p16f8x.h, src/value.cc, src/processor.cc,
	src/eeprom.h, src/p16f8x.cc, src/pic-ioports.cc, src/registers.h,
	src/pic-registers.cc, src/breakpoints.cc, src/14bit-processors.cc,
	src/stimuli.h, gui/gui_scope.cc:
	- Memory leak fixes.
	- The 12C50x and the 16f62x devices leak no memory.

2007-02-18  Scott Dattalo <scott@dattalo.com>
	* gui/gui_breadboard.cc, src/modules.cc, src/modules.h: The Module
	libraries are now implemented as STL maps.
	* src/symbol.h, src/symbol.cc: The symbol table now supports a
	'deleteSymbol' method. This method removes a symbol from the
	symbol table and frees up the memory belonging to it.
	* gpsim/main.cc, regression/logic_test/logic_test.asm,
	src/16bit-registers.h, src/init.cc, src/trigger.cc, src/expr.cc,
	src/p16x6x.cc, src/p16x8x.cc, src/packages.h, src/breakpoints.h,
	src/16bit-processors.cc, src/14bit-registers.h, src/gpsim_time.h,
	src/pic-instructions.cc, src/dspic/dspic-registers.cc,
	src/p16f62x.h, src/processor.h, src/stimuli.cc, src/eeprom.cc,
	src/pic-processor.cc, src/registers.cc, src/p16f62x.cc,
	src/gpsim_time.cc, src/packages.cc, src/attributes.h,
	src/sim_context.h, src/icd.cc, src/12bit-processors.cc,
	src/p12x.cc, src/pic-processor.h, src/sim_context.cc,
	src/value.cc, src/processor.cc, src/14bit-registers.cc,
	src/16bit-registers.cc, src/p16f8x.cc, src/registers.h,
	src/pic-registers.cc, src/breakpoints.cc, src/14bit-processors.cc,
	src/attributes.cc, src/16bit-processors.h, cli/parse.yy,
	cli/cmd_break.cc, cli/cmd_module.cc, cli/input.cc:
	- Memory leak fixes.

2007-02-12  Scott Dattalo <scott@dattalo.com>
	* src/symbol.cc: Deleted #if 0'd code.(the old symbol
	table implementation)

2007-02-11  Scott Dattalo <scott@dattalo.com>
	* gpsim/main.cc, gpsim/Makefile.am,
	regression/register_stim/register_stim.stc,
	regression/logic_test/logic_test.asm,
	regression/p18f452_ports/18f452.lkr, src/16bit-registers.h,
	src/fopen-path.cc, src/trigger.cc, src/trigger.h,
	src/12bit-hexdecode.cc, src/symbol.h, src/14bit-hexdecode.cc,
	src/16bit-hexdecode.cc, src/p16x6x.h, src/expr.cc,
	src/pic-instructions.h, src/ioports.h, src/i2c-ee.h,
	src/gpsim_object.h, src/comparator.h, src/modules.h,
	src/p16x6x.cc, src/p17c75x.cc, src/p16x8x.cc, src/pie.h,
	src/packages.h, src/p16f87x.cc, src/breakpoints.h, src/p16f87x.h,
	src/16bit-processors.cc, src/14bit-instructions.cc, src/intcon.cc,
	src/14bit-registers.h, src/operator.cc, src/i2c-ee.cc,
	src/symbol.cc, src/ssp.h, src/14bit-tmrs.h, src/pic-ioports.h,
	src/ValueCollections.cc, src/pic-instructions.cc,
	src/dspic/dspic-processors.cc, src/dspic/dspic-instructions.cc,
	src/dspic/dspic-processors.h, src/dspic/dspic-registers.cc,
	src/dspic/dspic-registers.h, src/p16f62x.h, src/processor.h,
	src/pic-registers.h, src/stimuli.cc, src/eeprom.cc,
	src/pic-processor.cc, src/pir.cc, src/intcon.h,
	src/gpsim_object.cc, src/xref.h, src/registers.cc, src/uart.cc,
	src/p16f62x.cc, src/uart.h, src/pie.cc, src/p16x7x.h, src/tmr0.cc,
	src/12bit-instructions.h, src/Makefile.am,
	src/16bit-instructions.h, src/pir.h, src/gpsim_time.cc,
	src/a2dconverter.h, src/trace.h, src/pm_rd.cc, src/xref.cc,
	src/ssp.cc, src/ui.cc, src/packages.cc, src/tmr0.h,
	src/sim_context.h, src/icd.cc, src/ioports.cc, src/14bit-tmrs.cc,
	src/comparator.cc, src/p16x5x.cc, src/p16x7x.cc, src/value.h,
	src/expr.h, src/12bit-processors.cc, src/p12x.cc,
	src/pic-processor.h, src/sim_context.cc, src/p16f8x.h,
	src/p18x.cc, src/pm_rd.h, src/modules.cc, src/value.cc,
	src/processor.cc, src/14bit-registers.cc, src/eeprom.h,
	src/16bit-registers.cc, src/p12x.h, src/p16f8x.cc, src/trace.cc,
	src/a2dconverter.cc, src/cod.cc, src/pic-ioports.cc,
	src/registers.h, src/pic-registers.cc, src/breakpoints.cc,
	src/12bit-processors.h, src/14bit-processors.cc,
	src/14bit-processors.h, src/attributes.cc, src/16bit-processors.h,
	src/14bit-instructions.h, src/16bit-instructions.cc,
	src/stimuli.h, configure.ac,
	extras/graphic_lcd/src/glcd_100X32_sed1520.cc,
	extras/lcd/hd44780.cc, extras/lcd/lcd.cc, modules/usart.cc,
	modules/switch.cc, modules/led.cc, modules/resistor.cc,
	modules/i2c.cc, modules/stimuli.cc, modules/logic.cc,
	modules/i2c-eeprom.cc, modules/ttl.cc, modules/encoder.cc,
	gui/gui_src.cc, gui/gui_breadboard.h, gui/gui_symbols.cc,
	gui/gui_regwin.cc, gui/gui_watch.h, gui/gui_src_asm.cc,
	gui/gui_stack.cc, gui/gui_watch.cc, gui/gui_scope.cc,
	gui/gui_breadboard.cc, cli/cmd_load.h, cli/scan.ll,
	cli/cmd_symbol.cc, cli/socket.cc, cli/cmd_help.cc, cli/cmd_bus.cc,
	cli/cmd_help.h, cli/parse.yy, cli/cmd_attach.cc, cli/cmd_attach.h,
	cli/cmd_x.cc, cli/cmd_break.cc, cli/cmd_node.cc, cli/cmd_break.h,
	cli/cmd_stimulus.h, cli/cmd_run.cc, cli/input.cc, cli/cmd_load.cc,
	cli/cmd_log.cc, cli/cmd_stimulus.cc, cli/cmd_symbol.h:
	- Rewrote the symbol table.
	* src/stimulus_orb.h, src/symbol_orb.h: Removed

2007-01-27 Borut Razem <borut.razem@siol.net>
	* doc/gpsimWin32, plat/win32/libgpsim.def: MSVC sync
	* extras/lcd/lcd.h: synced with Scott's changes

2007-01-20  Scott Dattalo <scott@dattalo.com>
	* src/pic-processor.cc, src/trace.h, src/p16x5x.cc,
	src/12bit-processors.cc, src/p12x.cc, src/pic-processor.h,
	src/processor.cc, src/14bit-registers.cc, src/trace.cc,
	src/trigger.cc, src/intcon.cc:
	- Added a Trace Type for Resets and Interrupts.
	- Removed some deprecated trace types (e.g. TRIS and Option).
	- Single stepping uses the clock phase code.
	* regression/rt.sh: Removed outdated comment.

	* cli/cmd_trace.cc: added an 'info' option to the trace
	command. This is for displaying information about allocated trace
	types. It is used primarily for debugging.

2007-01-20  Scott Dattalo <scott@dattalo.com>
	* gui/gui_menu.cc: Bug [1631921]. Preferences dialog box was
	grabbing the gtk focus and preventing child dialog boxes from
	having focus.

2007-01-17  Scott Dattalo <scott@dattalo.com>
	* src/expr.cc: Bug [1638250]. ramData[] references in expressions
	were evaluating to the index of the ramData and not to the ramData
	contents.

2007-01-14  Scott Dattalo <scott@dattalo.com>
	* cli/cmd_stopwatch.cc, cli/cmd_quit.cc, cli/scan.ll,
	cli/cmd_symbol.cc, cli/cmd_shell.cc, cli/cmd_version.cc,
	cli/cmd_help.cc, cli/cmd_bus.cc, cli/cmd_set.cc,
	cli/cmd_frequency.cc, cli/cmd_attach.cc, cli/cmd_dump.cc,
	cli/cmd_x.cc, cli/cmd_list.cc, cli/cmd_echo.cc,
	cli/cmd_processor.cc, cli/cmd_disasm.cc, cli/cmd_reset.cc,
	cli/cmd_break.cc, cli/cmd_node.cc, cli/cmd_module.cc,
	cli/cmd_clear.cc, cli/command.cc, cli/cmd_trace.cc,
	cli/cmd_icd.cc, cli/cmd_run.cc, cli/cmd_step.cc, cli/input.cc,
	cli/cmd_load.cc, cli/cmd_log.cc, cli/cmd_stimulus.cc,
	cli/command.h, cli/cmd_macro.cc:
	- gcc-4.2 doesn't like const char * types being assigned to char *

2007-01-14  Scott Dattalo <scott@dattalo.com>
	* regression/register_stim/Makefile: Regression test wasn't running.

2007-01-14 Borut Razem <borut.razem@siol.net>
	* plat/win32/libgpsim.def: MSVC sync
	* doc/gpsimWin32, plat/win32/gpsim.nsi: added svn Author stamp
	  glib-2.12.7, gtk+-2.10.7, pango-1.14.9, NSIS v2.23

2007-01-13  Scott Dattalo <scott@dattalo.com>
	* regression/p16f84/p16f84.stc: removed. The configuration file is
	now part of p16f84.asm
	* regression/p16f84/reset.asm: added. Tests resets and sleep.
	* regression/p16f509/reset.asm: cosmetic changes.
	* regression/ccp/ccp_877a.asm: made some local variables global so
	that I could more easily debug the clock phase changes.
	* regression/txisr_test/txisr_test.asm: Now captures unexpected
	resets.
	* regression/instructions_14bit/Makefile: Added branching.asm
	regression test
	* regression/instructions_14bit/branching.asm: Added. tests
	branching instructions. This was mainly created to debug the clock
	phase code for interrupts interrupting 2-cycle instructions.
	* regression/run_regression.sh: Added branching and reset
	regression tests.
	* src/14bit-instructions.cc: Cosmetic...
	* src/intcon.cc: Now interrupts are signified by calling
	cpu_pic->BP_set_interrupt() is called instead of
	bp.set_interrupt(). The purpose is to (eventually) separate
	interrupts from breakpoints.
	* src/clock_phase.h, src/clock_phase.cc: Added class
	'phaseCaptureInterrupt'. As its name implies, this is part of the
	clock phase stuff and it's designed to handle interrupts.
	* src/pic-processor.cc:
	 - Sleep is now handled by the clock phase code.
	 - Interrupts are now handled by the clock phase code.
	 - The run() method now only looks at the global break point
	 flag. (Before, the sleep and interrupt states were handled with
	 breakpoint flags.)
	 - Added an 'ActivityState' to reflect what the processor is
	 currently doing. This is primarily used by the 12-bit core to
	 determine if the processor is sleeping.
	* src/14bit-registers.cc: cosmetic. Added debug code.
	* src/pic-ioports.cc: Port B wakeup on change feature was not
	working.
	* src/pic-registers.cc: Numerous clock phase related changes. Now
	interrupts are properly handled. Also, there was a nasty design
	error that prevent proper handling of interrupts during the middle
	of call or return statements.

2007-01-11 Borut Razem <borut.razem@siol.net>
	* plat/win32/make.mingw: added -Wno-format to prevent mingw build
	  warnings:
	  warning: unknown conversion type character `I' in format
	  warning: int format, different type arg (arg X)
	  warning: `I' flag used with `%x' printf format
	* acinclude.m4: check for the presence of the readline library.
	  This version works also in cross-compilation environment.
	* plat/win32/libgpsim.def: MSVC sync

2007-01-10  Scott Dattalo <scott@dattalo.com>
	* src/symbol.cc, src/symbol.h, src/stimuli.cc, src/stimuli.h:
	 - stimulus and node symbols can now be added to the symbol table
	 with the 'Clearable' flag turned off.

	* src/p16x6x.cc, src/p17c75x.cc, src/p16x8x.cc, src/p16f87x.cc,
	src/p16f62x.cc, src/p16x5x.cc, src/p12x.cc, src/p18x.cc,
	src/modules.cc, src/p16f8x.cc:
	 - All processors were individually adding a module symbol to the
	 symbol table. Now this is done in one place down in the Module
	 class constructor.
	 - The symbol table is now no longer automatically cleared
	 whenever a processor is loaded. Previously, if you loaded a
	 module (e.g. the usart) and then load the processor, the module's
	 clearable symbols would be removed! There's still some work that
	 needs to be done here. However, to do things correctly will take
	 some time...

2007-01-08  Scott Dattalo <scott@dattalo.com>
	* regression/make.regression:
	 - Added a rule to run a regression test interactively. Suppose
	 you have a file named 'mytest.asm'. Then the rule 'mytest.-' can
	 be invoke like this:
	   $ make mytest.-
	* regression/p16f84/p16f84.asm, regression/p16f84/Makefile: Placed
	 the configuration script into the .asm file.
	* src/p16x8x.cc, src/p16x8x.h:
	 - Added the MCLR pin to the '83 and the '84
	* src/pic-instructions.cc
	 - clock phase change - the SLEEP instruction no longer sets a
	 breakpoint
	* src/pic-processor.cc, src/pic-processor.h:
	 - Added an exit_sleep method.
	 - Removed the external reset controls added in previous commit
	 - Removed the WDT 'start_sleep' method. It was not being called.
	* src/p12x.cc:
	 - Use the already existing config_modes structure to record
	 whether the MCLR pin is enabled or not.
	* src/pic-ioports.cc:
	 - RBIF changes now cause the processor to exit sleep.
	* src/14bit-processors.cc, src/14bit-processors.h:
	 - Added MCLR support for the mid range processors.
	 - Cleaned up config word management.

2007-01-05 Borut Razem <borut.razem@siol.net>
	* plat/win32/libgpsim.def: MSVC sync

2007-01-04  Scott Dattalo <scott@dattalo.com>
	* port_stim/Makefile, tmr0_16bit/Makefile, spi/Makefile,
	logic_test/Makefile, make.regression, wavegen/Makefile, rt.sh,
	p12c509/Makefile, ttl/Makefile, ccp/Makefile, comparator/Makefile,
	txisr_test/Makefile, digital_stim/Makefile, resistor/Makefile,
	breakpoints/Makefile, interrupts_14bit/Makefile,
	node_test/Makefile, p16f84/Makefile, usart_test/Makefile,
	analog_stim/Makefile, eeprom_wide/Makefile, switch_test/Makefile,
	p18f452_ports/Makefile, macro_test/Makefile, psp/Makefile,
	instructions_12bit/Makefile, a2d/Makefile,
	instructions_14bit/Makefile, p12ce518/Makefile,
	instructions_16bit/Makefile, run_regression.sh, i2c/Makefile,
	p18f/Makefile:
	- Added make clean option to 'run_regression.sh'
	- Cleaned up the make rules
	* p18f/startup.stc: removed
	* regression/startup.stc: added

2007-01-02  Scott Dattalo <scott@dattalo.com>
	* src/16bit-processors.cc, src/16bit-processors.h,
	src/dspic/dspic-processors.cc, src/dspic/dspic-processors.h,
	src/12bit-processors.cc, src/12bit-processors.h,
	src/14bit-processors.cc, src/14bit-processors.h:
	- removed 'por()' method from Processor class
	* src/processor.h, src/processor.cc
	 - removed 'por()' method from Processor class.
	 - removed unused set() and get() methods
	 - RegisterMemoryAccess now has a reset() method.
	* src/14bit-registers.h, src/14bit-registers.cc
	 - The Status_register now has a 'reset()' method.
	* src/pic-processor.h, src/pic-processor.cc:
	 - Added a 'phaseIdle' to handle idle processor states. (like when
	 reset is being held low).
	 - added support for MCLRE
	 - ::reset() now handles MCLR resets
	 - WDT handles MCLR resets
	* src/p12x.h, src/p12x.cc:
	 - Added support for MCLRE. Now, when GPIO3 is held low on the
	 12c50x processors, the CPU is held in reset.
	* src/clock_phase.cc, src/clock_phase.h:
	 - Added phaseIdle class.
	* src/pic-registers.cc:
	 - The program counter class now handles resets.
	* src/16bit-instructions.cc: removed a comment.
	* src/gpsim_classes.h:
	 - Added an 'EXIT_RESET' type to the RESET_TYPE enumeration.
	 - Removed 'PROCESSOR_STATES' enumeration.
	* regression/p12c509/tmr0.asm:
	MCLR resets are now working.

2006-12-31  Scott Dattalo <scott@dattalo.com>
	* src/os_dependent.cc: Applied patch [1625380] from Jean-Etienne
	Lamiaud that fixes dynamic module loading on OS X.

2006-12-27  Scott Dattalo <scott@dattalo.com>
	* src/Makefile.am, modules/Makefile.am, eXdbm/Makefile.am,
	cli/Makefile.am, Makefile.am:
	Applied patch from Vitaly Lipatov that fixes the linking
	order. patch [1621792]

2006-12-27  Scott Dattalo <scott@dattalo.com>
	* src/uart.cc: applied patch from Jean-Etienne Lamiaud that
	supports uart framing and overflow errors. patch [1621771]

2006-12-27  Scott Dattalo <scott@dattalo.com>
	* regression/analog_stim/p18f452.asm,
	regression/analog_stim/18f452.lkr,
	regression/analog_stim/Makefile, regression/run_regression.sh:
	- Added a regression test for analog stimuli.
	* cli/cmd_stimulus.cc: the 'analog' modifier for asynchronous
	stimuli was being ignored. Bug [1621698]

2006-12-23 Borut Razem <borut.razem@siol.net>
	* plat/win32/libgpsim.def: MSVC sync
	* modules/i2c.cc, modules/i2c.h, modules/makefile.mingw,
	  modules/vcproj: added i2c.cc, i2c.h to the project, removed warnings
	* doc/gpsimWin32, plat/win32/gpsim.nsi : atk-1.12.3, glib-2.12.6,
	  gtk+-2.10.6, pango-1.14.8, NSIS v2.22

2006-12-22  Scott Dattalo <scott@dattalo.com>
	* src/p16x6x.cc, src/16bit-processors.cc, src/14bit-registers.h,
	  src/pic-ioports.h, src/pic-instructions.cc, src/pic-registers.h,
	  src/pic-processor.cc, src/tmr0.cc, src/tmr0.h, src/p16x5x.cc,
	  src/12bit-processors.cc, src/p12x.cc, src/pic-processor.h,
	  src/p18x.cc, src/14bit-registers.cc, src/16bit-registers.cc,
	  src/pic-ioports.cc, src/pic-registers.cc, src/12bit-processors.h,
	  src/14bit-processors.cc, src/14bit-processors.h:
	- Option register is no longer a member of the pic_processor base
	  class. The 12-bit and 14-bit separately declare an option
	  register member and dynamically construct it.
	- Moved OPTION_REG from 14bit-registers to pic-registers
	- TMR0 now has a pointer to the option register (as opposed to
	  directly referencing the option register in the cpu class).
	- TMR0 for 16-bit cores was using the option register instead of
	  the T0CON during initialization
	- The TRIS register resets to all 1's for the 12-bit and 14-bit
	  cores during WDT resets. However, it remains unchanged for the
	  16-bit cores. A flag was added to the PicTrisRegister base class
	  to describe what action should be taken during WDT resets

2006-12-22  Scott Dattalo <scott@dattalo.com>
	* regression/12c509/tmr0.asm: (This file is going to change
	names!). Testing various reset modes.

2006-12-22  Scott Dattalo <scott@dattalo.com>
	* modules/stimuli.h, modules/stimuli.cc: Added an 'initial'
	attribute to the pulsegen module that allows the initial pin
	voltage to be specified.

2006-12-20  Scott Dattalo <scott@dattalo.com>
	* cli/cmd_load.cc: Fixed missing end-of-line string continuation

2006-12-20  Scott Dattalo <scott@dattalo.com>
	* gpsim/main.cc: added a -I option to the gpsim invocation. This
	is identical to the '-c' option except that it will not change the
	current working directory. The '-c' option automatically changes
	directories to where ever the included script resides.
	* src/input.cc, src/cmd_load.cc: now scripts residing in other
	directories can be loaded in such a way as to not cause a
	directory change. From gpsim's command line, the 'load' command
	now supports a 'i' option.

2006-12-20  Scott Dattalo <scott@dattalo.com>
	* src/12bit-processors.cc, src/p12x.cc, src/p12x.h:
	Config word stuff was broken.
	* regression/p12c509/tmr0.asm: Converted into relative mode code.
	* regression/p12c509/Makefile, regression/p12c509/12c509.lkr:
	Added. This is in preparation for testing SLEEP and WDT for the
	12bit cores.

2006-12-19 Scott Dattalo <scott@dattalo.com>
	* modules/i2c.h, modules/i2c.cc, modules/Makefile.am: Added an i2c
	master module. Currently can only be driven with attributes.

2006-12-18 Scott Dattalo <scott@dattalo.com>
	* src/pic-ioports.cc, src/p16f8x.cc, src/ioports.cc,
	src/pic-ioports.h:

2006-12-14 Scott Dattalo <scott@dattalo.com>
	* src/trace.cc: command line tracing now 1) only display the last
	instruction traced after a step (instead of the last 2
	instructions) and 2) the source line for the instruction.
2006-12-14 Scott Dattalo <scott@dattalo.com>
	* src/ioports.h, src/ioports.cc: Added an 'updatePins()' method to
	the PortModule class. This provides a way of updating just a
	subset of the port pins.

2006-12-01 Borut Razem <borut.razem@siol.net>
	* modules/stimuli.cc: access trace object indirectly by using
	  get_trace()
	* plat/win32/libgpsim.def: MSVC sync

2006-11-27 Scott Dattalo <scott@dattalo.com>
	* src/pic-ioports.h, src/ioports.cc, src/pic-ioports.cc:
	- Improved class member initialization. Specifically, the pin enable
	mask was not getting set properly.
	* modules/gpsim_modules.cc, modules/stimuli.cc, modules/stimuli.h:
	- Added 16-bit and 32-bit versions of the parallel port stimulus
	- Added a 'pullup' register to the port stimulus.
	- Changed the parallel port stimulus I/O pins to IO_bi_directional_pu
	* regression/port_stim/port_stim.asm
	- The parallel port stimulus regression test now tests the
	module's pullup resistors.

2006-11-22 Scott Dattalo <scott@dattalo.com>
	* src/interface.cc: start_simulation() is now incorporating
	functionality previously implemented in Processor::run().
	* gui/gui_src.cc, gui/gui_src_asm.cc, gui/gui_menu.cc: The gui now
	starts a simulation by calling gpsim_interface::start_simulation()
	instead of active_cpu->run()
	* src/pic-processor.cc, src/clock_phase.cc, src/clock_phase.h,
	src/pic-registers.cc: The ClockPhase::setNextPhase() method is no
	longer virtual.

2006-11-21 Scott Dattalo <scott@dattalo.com>
	* regression/TODO: Added.

2006-11-21 Scott Dattalo <scott@dattalo.com>
	* src/ValueCollections.h, src/ValueCollections.cc: Added a new
	constructor for IIndexedCollection objects that allow for named
	Value object collections.

2006-11-20 Scott Dattalo <scott@dattalo.com>
	* src/ValueCollections.h: SetAt method in the IndexedCollection
	template was using a '<=' where a '>=' should have been used
	instead.

2006-11-19 Scott Dattalo <scott@dattalo.com>
	* src/clock_phase.cc, src/clock_phase.h, src/16bit-processors.cc,
	src/pic-processor.cc, src/processor.cc, src/pic-registers.cc:
	 - Added support for interrupt phases in the new external clock
	 feature. More work is still needed and still,
	   //#define CLOCK_EXPERIMENTS
	Is commented out. - So this new code is inhibited by default.

2006-11-17 Borut Razem <borut.razem@siol.net>
	* src/makefile.mingw, src/src.vcproj: MSVC sync

2006-11-17 Scott Dattalo <scott@dattalo.com>
	* src/clock_phase.h, src/clock_phase.cc: Added. Defines the
	ClockPhase class, which is a base class for supporting external
	processor clocks. Note, this could is currently experimental and
	is inhibited. To enable it, uncomment the line
	   //#define CLOCK_EXPERIMENTS
	in clock_phase.h
	* src/pic-instructions.cc, src/pic-processor.cc, src/Makefile.am,
	  src/processor.cc, src/16bit-registers.cc, src/pic-registers.cc,
	  src/16bit-instructions.cc:
	  - Support for external processor clocks. This is partially
	  implemented and currently inhibited.

2006-11-16 Scott Dattalo <scott@dattalo.com>
	* src/pic-instructions.cc, src/pic-instructions.h: .lst line
	numbers were not getting set properly for instructions containing
	assertions.

2006-11-15 Scott Dattalo <scott@dattalo.com>
	* src/breakpoints.cc: post assertions are now displayed as such
	when they're triggered. Still need to have the breakpoint messages
	to display the postAssertion modifer.
	* src/value.cc: Added a diagnostic message.

2006-11-14 Scott Dattalo <scott@dattalo.com>
	* cli/parse.yy, cli/cmd_break.cc, cli/cmd_break.h,
	src/gpsim_time.cc: 2006-01-02 I disabled the ability to set
	attribute breakpoints. That feature.has now been re-enabled.
	* regression/breakpoints/breakpoints.asm: Added a regression test
	for the stopwatch attribute breakpoint

2006-11-13 Scott Dattalo <scott@dattalo.com>
	* gui/gui_trace.cc, gui/gui_profile.cc, gui/gui_menu.cc,
	  gui/gui_scope.cc, gui/gui_stopwatch.cc, cli/socket.cc,
	  modules/usart.cc, src/stimuli.cc, src/eeprom.cc,
	  src/pic-processor.cc, src/uart.cc, src/tmr0.cc, src/gpsim_time.cc,
	  src/pm_rd.cc, src/ssp.cc, src/14bit-tmrs.cc, src/processor.cc,
	  src/14bit-registers.cc, src/16bit-registers.cc, src/trace.cc,
	  src/a2dconverter.cc, src/breakpoints.cc, src/interface.cc,
	  src/gpsim_time.h, src/i2c-ee.cc:
	  - The 'value' member of the Cycle_Counter class is now private.

2006-11-12 Borut Razem <borut.razem@siol.net>
	* doc/gpsimWin32.html: use readline 5.1. Packages are available at
	  http://gpsim.sourceforge.net/gpsimWin32/packages/readline-5.2-20061112-src.zip,
	  http://gpsim.sourceforge.net/gpsimWin32/packages/readline-5.2-20061112-lib.zip,
	  http://gpsim.sourceforge.net/gpsimWin32/packages/readline-5.2-20061112-bin.zip,
	  cairo-1.2.6, glib-2.12.4, pango-1.14.5, NSIS v2.21

2006-11-11 Rob Pearce <rob@bdt-home.demon.co.uk>
	* regression/interrupts_14bit: modified PORTB change on state test to
	  check for interrupts on both edges
	* src/processor.cc, src/processor.h, regression/usart_test: change of
	  cpu frequency now propagates to other timings. Second USART test
	  modified to set lower CPU clock to validate this

2006-11-11 Borut Razem <borut.razem@siol.net>
	* doc/gpsim.css, doc/spsimWin32.html: renamed from gpsimWin32.css
	* doc/index.html, doc/snap_header.html, doc/snap_footer.html,
	  doc/snap.php: added
	* doc/gpsim.css, doc/gpsimWin32.html, doc/gpsim.html,
	  doc/gpsim_svn.html: XHTML1 compatible
	* makefile.mingw: claen performs also clean-extras

2006-11-10 Scott Dattalo <scott@dattalo.com>
	* ANNOUNCE: Updated for 0.22.0 release. Note that Borut created an
	0.22.0 SVN tag that corresponds to revision 1827.

2006-11-10 Borut Razem <borut.razem@siol.net>
	* configure.ac, doc/gpsimWin32.html, extra/graphic_lcd/configure.ac,
	  gpsim.spec.in, gui/gui_menu.c, modules/README: corrected all url-s
	  from http://www.dattalo.com/gnupic/gpsim.html to
	  http://gpsim.sourceforge.net/gpsim.html
	* regression/*.lkr, regression/*.asm, regression/Makefile,
	  src/p16f8x.*, src/pm_rd.*, src/psp.*: added svn properties
	  svn:eol-style native, svn:keywords "Author Date Id Revision"
	* plat/win32/gpsim.nsi, plat/win32/makefile.mingw:
	  extract PRODUCT_WEB_SITE from ../../configure.ac
	* doc/gpsim.html, doc/gpsim_svn.html, doc/gpsim.ico:
	  added favicon
	* doc/gpsim.html: applied patch from David Barnett:
	  "I added the F73 and F74, removed the PIC17's,
	  fixed a typo and changed the modified date"

2006-11-09 Scott Dattalo <scott@dattalo.com>
	* configure.ac, extras/graphic_lcd/configure.ac: 0.22.0 Release

2006-11-09 Scott Dattalo <scott@dattalo.com>
	* doc/gpsim.lyx: Added module documentation, macro documentation,
	scripting documentation, and examples documentation

2006-11-08 Scott Dattalo <scott@dattalo.com>
	* doc/gpsim.lyx: Added module documentation and in particular the
	USART module.

2006-11-08 Borut Razem <borut.razem@siol.net>
	* extras/graphic_lcd/src/glcd_100X32_sed1520.cc,
	  extras/lcd/hd44780.cc, extras/lcd/hd44780.h, extras/lcd/lcd.cc,
	  extras/lcd/lcdgui.cc, extras/lcd/module_manager.cc:
	  removed compiler warnings
	* doc/gpsim.html, doc/gpsim_svn.html: changed encoding to UTF-8
	* plat/win32/gpsim.nsi: changed PRODUCT_WEB_SITE URL and
	  PRODUCT_VERSION

2006-11-08 Scott Dattalo <scott@dattalo.com>
	* src/breakpoints.cc: Fixed compiler warning.

2006-11-08 Borut Razem <borut.razem@siol.net>
	* plat/win32/libgpsim.def: MSVC sync
	* doc/gpsim_svn.html, doc/gpsim.html: doc/gpsim_cvs.html renamed to
	  doc/gpsim_svn.html

2006-11-08 Scott Dattalo <scott@dattalo.com>
	* src/processor.cc: Fixed -p<procname> command line
	option. (actually, there is still an issue with gpsim using the -p
	option to find the processor, but then naming the processor
	something else.)

2006-11-08 Scott Dattalo <scott@dattalo.com>
	* configure.ac: 0.22.0-RC4 - release candidate 4
	* doc/gpsim.html: fix broken links.
	* README, INSTALL: Minor documentation changes pertaining to 0.22.0

2006-11-08 J.R. Heisey <jrheisey@sourceforge.com>
	* cli/cmd_macro.cc:
	- Made some of the macro command console output conditional
	on the verbose variable to clean up the console output.
	- Enhanced the console output of the cmd_macro::end_define().
	* src/breakpoints.cc: Added call in Breakpoints::set_breakpoint()
	to Processor::NotifyBreakpointSet() to help with the integration
	of processors defined in their own dynamic library.

2006-11-07 Scott Dattalo <scott@dattalo.com>
	* gui/gui_regwin.cc: EEPROM window abort bug fixed on 2006-11-04
	had a flaw. Hopefully that's been fixed now. (The problem was that
	the fix assumed if the maxrow member of the register_sheet was 0
	that there were no cells in the sheet. However, in the gtksheet
	widget, maxrow can be 0 if there's only 1 row!)

2006-11-07 Scott Dattalo <scott@dattalo.com>
	* gui/gui_symbols.cc, gui/gui_src_asm.cc: Changed the way glib
	lists were deallocated. This removes a glib compile warning.

2006-11-07 Scott Dattalo <scott@dattalo.com>
	* src/16bit-registers.h, src/16bit-registers.cc, src/p16x6x.h,
	src/p16x6x.cc, src/p16f87x.h, src/p16f8x.h,
	src/16bit-processors.h, src/16bit-processors.cc, src/p16f62x.h,
	src/p16f62x.cc, src/uart.h, src/uart.cc:
	- Removed USART_MODULE14 and USART_MODULE16 classes. All they were
	doing was declaring a 'cpu' pointer, but they weren't even using
	it.
	- All member functions of the USART_MODULE class are now non-virtual.

2006-11-06 Rob Pearce <rob@bdt-home.demon.co.uk>
	* src/stimuli.cc: Fixed the p12ce51x I2C-EE bug - it was due to a
	stimulus initialisation error caused by bit rot in the node summing
	function for the single stimulus connected case!

2006-11-06 David Barnett <dbarnett@edt.biz>
	* modules/gpsim_modules.cc: The push_button is named as
	"push_button" in push_button.h, but "pushbutton" in
	gpsim_modules.cc.  This had the effect that "module load
	push_button was saved into the netlist file, but "module type
	push_button not created" would display when loading the netlist.

2006-11-06 Scott Dattalo <scott@dattalo.com>
	* doc/gpsim.html, doc/gpsim_cvs.html: Fixed links. Changed CVS
	references to SVN.

2006-11-05 Scott Dattalo <scott@dattalo.com>
	* src/uart.cc, src/uart.h: TXIF is now only gets set if both TXEN
	and SPEN are set. The USART_MODULE class interface was redesigned
	slightly to simplify accesses to the various registers associated
	with the USART.
	* src/p16f62x.cc, src/16bit-registers.cc, src/p16f8x.cc,
	src/16bit-registers.h, src/p16x6x.cc, src/p16f87x.cc,
	src/16bit-processors.cc:
	- Adapted new USART_MODULE interface.
	* regression/usart_test/usart_pir1v1.asm,
	regression/usart_test/usart_pir1v2.asm:
	- The usart regression test noew makes sure that TXIF is not set
	before TXEN and SPEN are set.

2006-11-05 Scott Dattalo <scott@dattalo.com>
	* src/trigger.cc, src/trace.cc, src/breakpoints.cc: Cleaned up
	trace printing of traced breakpoints.

2006-11-04 Borut Razem <borut.razem@siol.net>
	* plat/win32/libgpsim.def: MSVC sync

2006-11-04 Scott Dattalo <scott@dattalo.com>
	* src/cod.cc, src/pic-processor.cc: Applied variation of patch
	submitted by David Barnett <dbarnett@edt.biz> that prepends
	processor name with a 'p' if the name begins with a digit in the
	.cod file

2006-11-04 Scott Dattalo <scott@dattalo.com>
	* gui/gui_breadboard.cc: Patch from Ralf that fixes coordinates of
	components selected in the breadboard.

2006-11-04 Scott Dattalo <scott@dattalo.com>
	* gui/gui_regwin.cc: gpsim was aborting if eeprom window was
	opened while a processor without an eeprom was loaded.
	David Barnett <dbarnett@edt.biz> reported this bug.

2006-11-04 Scott Dattalo <scott@dattalo.com>
	* cli/input.cc: Typo in preprocessor ifdef. This was discovered
	while applying a patch from the Gentoo distro. (The patch had
	already independently been applied, yet the typo hadn't been
	noticed until this new patch had been submitted.)

2006-11-03 Scott Dattalo <scott@dattalo.com>
	* src/trace.cc, src/trace.h, src/dspic/dspic-registers.cc,
	src/12bit-processors.cc, src/processor.cc,
	src/14bit-processors.cc, src/14bit-registers.cc,
	src/16bit-processors.cc, modules/stimuli.cc
	 - TraceType constructors are only initialized with size (and not
	   with type).
	 - Trace entry allocation now gets size request from TraceType
	 class.
	* src/trigger.cc, src/breakpoints.h, src/breakpoints.cc: Trigger
	action implementation for special breakpoints has been enhanced to
	take advantage of multiple trace entries.

2006-11-01 Scott Dattalo <scott@dattalo.com>
	* src/trigger.cc, src/trigger.h, src/breakpoints.h,
	src/breakpoints.cc, src/trace.h, src/trace.cc:
	 - Cleaned up breakpoint tracing.
	 - Added TriggerObject::invokeAction() method to handle the
	 default behavior of invoking a trigger object action and handling
	 the tracing.
	 - Moved the BreakTraceType and BreakTraceObject classes from
	 breakpoints.cc to trigger.cc (probably should rename these?)
	* src/pic-processor.cc: Change the default Integer type output
	width to 2 characters. (At 8 characters, there were a lot of 0's.)
	* src/gpsim_object.cc: toString(char*,int) now returns something.

2006-11-01 Scott Dattalo <scott@dattalo.com>
	* src/breakpoints.cc: Fixed core dump for breakpoint expressions
	that are entered improperly.

2006-11-01 Ralph Neider <rneider@web.de>
	* modules/gpsim_modules.cc: push_buttons are now ignored when
	gpsim is built without the gui.

2006-11-01 Scott Dattalo <scott@dattalo.com>
	* acinclude.m4: Patch from sf user iggie that fixes check for readline 5.2

2006-11-01 Borut Razem <borut.razem@siol.net>
	* plat/win32/libgpsim.def: MSVC sync

2006-11-01 Roy Rankin <rrankin@ihug.com.au>
	* src/pic-processor.cc: Removed p17c7xx processor family from
	  processor list as code does not work

2006-10-31 Scott Dattalo <scott@dattalo.com>
	* src/trace.h, src/trace.cc: TraceType type() now takes an argument
	that allows a user to select a particular subtype.
	* src/trigger.h, src/trigger.cc, src/breakpoints.cc, src/breakpoints.h:
	More breakpoint tracing changes. Execution break points are now
	displayed in the raw trace buffer.

2006-10-28 Scott Dattalo <scott@dattalo.com>
	* src/trace.h, src/trace.cc: Raw trace dumps were cleaned up
	more. The cycle trace is now decoded in a fashion similar to other
	trace types.
	* src/breakpoints.cc: Began design for BreakTraceType and
	BreakTraceObject.

2006-10-30 Roy Rankin <rrankin@ihug.com.au>
	* src/ssp.cc : fixed improper use of type bool
	* regression/p12ce518/p12ce518.asm : correct error in test

2006-10-22 Borut Razem <borut.razem@siol.net>
	* plat/win32/gpsim.nsi: removed doc/*.html, added doc/screenshots/*,
	  added extras\graphic_lcd\doc\*
	* plat/win32/libgpsim.def: MSVC sync
	* gui/gui.vcproj: generate config.h from config_win32.h.in
	* cli/cmd_log.cc, cli.socket.cc, gui/gui_menu.cc, gui/gui_scope.cc,
	  gui/gui_src_asm.cc, modules/led.cc, modules/stimuli.cc,
	  modules/switch.cc, src/12bit-processors.cc, src/14bit-processors.cc,
	  src/16bit-processors.cc, src/comparator.cc, src/p16f8x.cc,
	  src/spp.cc: fixed warning

2006-10-28 Scott Dattalo <scott@dattalo.com>
	* cli/cmd_load.cc: used a different version of the toString()
	method in the load command

2006-10-28 Scott Dattalo <scott@dattalo.com>
	* src/trace.h, src/trace.cc, src/12bit-processors.cc,
	src/14bit-registers.cc:
	 - Added a CycleTraceType
	 - Now trace type classes do not add themselves to the current
	 trace frame whenever their decode() methods are called.

2006-10-25 Scott Dattalo <scott@dattalo.com>
	* gui/gui_src_asm.cc: Source browser page ptr is not ignored when
	symbolic debugging is unavailable.
	* cli/parse.yy: Assigning a non-quoted value to one of the scope
	channel attributes was causing an abort.
	* src/pic-instructions.h, src/14bit-instructions.cc,
	src/pic-instructions.cc, src/16bit-instructions.h,
	src/16bit-instructions.cc:
	  -  Instruction class constructors now initialize all of their
	  data memmbers.
	* doc/gpsim.html: Fixed some missing links.

2006-10-25 Steffen Joeris <Steffen.Joeris@skolelinux.de>
	* modules/paraface.cc: Patch from Debian Etch release that enables
	certain Free BSD builds.

2006-10-24 Scott Dattalo <scott@dattalo.com>
	* src/trace.cc: Added detailed comments on TraceFrames,
	TraceTypes, and TraceObjects.

2006-10-23 David Barnett <dbarnett@edt.biz>
	* src/12bit-processors.cc: Fixed extra qualifier bug in the
	OptionTraceType class.

2006-10-23 Scott Dattalo <scott@dattalo.com>
	* AUTHORS: Added Roy to the list :)
	* regression/Makefile.am: added the i2c regression tests to the
	distribution
	* configure.ac: RC2 - release candidate 2
	* README.EXAMPLES: this was totally out of date and still needs to
	be cleaned up.
	* README: changed revision info, made minor changes.

2006-10-23 Scott Dattalo <scott@dattalo.com>
	* src/14bit-processors.cc, src/12bit-processors.cc,
	src/12bit-processors.h, src/trace.h, src/trace.cc:
	The OPTION register now has its own trace object
	* doc/gpsim.lyx: Minor documentation updates
	* doc/gpsim.html: Placing gpsim web page under CVS control.
	* doc/screenshots/breadboard.png: added
	* doc/screenshots/registerview.png: added
	* doc/screenshots/scope1.png: added
	* doc/screenshots/scope2.png: added
	* doc/screenshots/source_browser.png: added

2006-10-23 Roy Rankin <rrankin@ihug.com.au>
	* src/p16x6x.h src/ioports.h src/p16x6x.cc src/p16f87x.cc
	  src/i2c-ee.cc src/ssp.h src/pir.cc src/pir.h src/ssp.cc
	  src/p18x.cc src/p16f8x.cc regression/run_regression.sh
	  regression/i2c/p16f876a.asm regression/i2c/16f88.lkr
	  regression/i2c/i2c_low.inc regression/i2c/16f876a.lkr
	  regression/i2c/p16f88.asm regression/i2c/Makefile
	- Add I2C functionality

2006-10-22 Borut Razem <borut.razem@siol.net>
	* */.cvsignore: removed CVS leftovers
	* modules/stimuli.cc: trace.* replaced with get_trace().*
	  the getter function instead of direct object access should
	  be used in modules
	* plat/win32/sdcc.nsi: added examples/modules/*/README to the
	  setup package

2006-10-19 Scott Dattalo <scott@dattalo.com>
	* regression/Makefile.am: Added
	* configure.ac, extras/graphic_lcd/configure.ac, Makefile.am,
	examples/Makefile.am: Changed revision from 0.21.12-pre to
	0.22.0-RC1.

2006-10-18 Scott Dattalo <scott@dattalo.com>
	* src/processor.cc, src/processor.h:
	 - insertRegister() and removeRegister() methods of the
	 RegisterMemoryAccess class now return bool.
	* src/breakpoints.cc: deleted commented out code.
	* modules/stimuli.cc, modules/stimuli.h: Implemented the register
	 mapping functionality.
	* cli/parse.yy: improved the reg() operator syntax. It used to be
	 that only integer operands were accepted. Now, expressions are
	 accepted.
	* regression/port_stim/18f452.lkr: added
	* regression/port_stim/Makefile: added
	* regression/port_stim/port_stim.stc: added
	* regression/port_stim/port_stim.asm: added
	* regression/run_regression.sh: Added a regression test for the
	 port_stimulus module.

2006-10-17 Scott Dattalo <scott@dattalo.com>
	* examples/projects/stack_test/stack_test.asm,
	examples/projects/stack_test/stack_test.stc,
	examples/projects/stack_test/Makefile,
	examples/projects/digital_stim/digital_stim.stc,
	examples/projects/digital_stim/digital_stim.asm,
	examples/projects/digital_stim/Makefile,
	examples/projects/p16f628_test/f628.asm,
	examples/projects/p16f628_test/Makefile,
	examples/projects/p16f628_test/f628.stc:
	 - Clean up examples.
	* configure.ac: Removed the 12bit, 14bit, and 16bit subdirectories
	from the list of packaged directories. The example code there is old and
	needs a whole lot of work to get working.

2006-10-17 Scott Dattalo <scott@dattalo.com>
	* examples/modules/Makefile.am,
	examples/modules/usart_test/usart_test.asm,
	examples/modules/mod_test/mod_test.stc,
	examples/modules/usart_test/Makefile:
	 - updated examples
	* examples/modules/led_test/README: added
	* examples/modules/led_test/Makefile: added
	* examples/modules/logic_test/README: added
	* examples/modules/usart_test/README: added
	* examples/modules/mod_test/README: added
	* examples/modules/usart_test/usart.asm: removed

2006-10-17 Scott Dattalo <scott@dattalo.com>
	* src/ssp.cc: Fixed uninitialized class data.

2006-10-17 Scott Dattalo <scott@dattalo.com>
	* src/breakpoints.h, src/breakpoints.cc, src/processor.h,
	src/processor.cc, src/registers.cc, src/registers.h:
	Moved the register breakpoint clearing and setting functionality
	from the register breakpoint classes to the
	RegisterMemoryAccess. The purpose of this is to allow other types
	of register objects (besides break points) to replace registers.
	* modules/gpsim_modules.cc, modules/stimuli.cc, modules/stimuli.h:
	Added the parallel port stimulus. This stimulus is identical to a
	PIC port register in that it has a PORT, TRIS, and LATCH
	register. Users can control the state of the parallel port
	stimulus in one of two ways. First, there are user accessible
	attributes (eg port.latch can be assigned a value). Second, (and
	this is not completed yet) the user can embed the parallel
	stimulus into the register memory map. This allows the parallel
	stimulus to be accessed programmatically (that is from within the
	PIC assembly code). This allows an assembly program to directly
	control the simulation environment.

2006-10-17 Scott Dattalo <scott@dattalo.com>
	* src/trace.cc, src/trace.h: Changed an empty trace entry from 0
	to 0x3fffffff. This provides away to differentiate between an
	empty trace entry and an uninitialized trace type.

2006-10-17 Scott Dattalo <scott@dattalo.com>
	* src/pic-ioports.h, src/pic-ioports.cc, src/16bit-processors.cc,
	src/16bit-processors.h: Moved the PicLatchRegister class from the
	16bit-processor definitions to the pic-ioport definitions.

2006-10-16 Scott Dattalo <scott@dattalo.com>
	* gui/gui_src_asm.cc: Renamed the popup menu item function 'Run
	here' to 'Run to here'.

2006-10-15 Scott Dattalo <scott@dattalo.com>
	* gui/gui_src_asm.cc: The popup menu item function 'Move PC here'
	was not updating the program counter.

2006-10-15 Scott Dattalo <scott@dattalo.com>
	* src/trace.h, src/trace.cc:
	  - Added classes for tracing module events.
	  - Fixed a couple of bugs with invalid trace objects being
	  created. Also, invalid trace entries were causing the trace dump
	  to be aborted.
	* src/16bit-instructions.cc: Removed commented out code
	* src/dspic/dspic-processors.cc, src/processor.h,
	  src/pic-processor.cc, src/registers.cc, src/ioports.cc,
	  src/processor.cc, src/14bit-registers.cc, src/registers.h:
	  The interface to the trace buffer changed slightly. Also,
	  registers were improperly allocating trace objects.
	* doc/gpsim.lyx: Added some more documentation.

2006-10-08 Scott Dattalo <scott@dattalo.com>
	* modules/switch.cc, modules/switch.h: separated out the gui
	specific portions of the switch into another class.

2006-10-04 Scott Dattalo <scott@dattalo.com>
	* modules/switch.cc: Switch resistance has successfully been reintroduced
	* regression/switch_test/switch_test.asm: Added a test to test the
	switch resistance. Note, there are no assertions set on the test
	because currently there is no way to query the node voltage
	directly.

2006-10-02 Borut Razem <borut.razem@siol.net>
	* gpsim.sln, cli/input.cc, cli/cli.vcproj, cli/makefile.mingw,
	  gpsim/gpsim.vcproj, gpsim/makefile.mingw, plat/win32/gpsim.nsi:
	  use readline 5.1. Packages are available at
	  http://gpsim.sourceforge.net/gpsimWin32/packages/readline-5.1-20061001-src.zip,
	  http://gpsim.sourceforge.net/gpsimWin32/packages/readline-5.1-20061001-lib.zip,
	  http://gpsim.sourceforge.net/gpsimWin32/packages/readline-5.1-20061001-bin.zip
	* doc/gpsimwin32.html: readline 5.1

2006-09-29 Scott Dattalo <scott@dattalo.com>
	* modules/switch.cc, modules/switch.h: Trying to reintroduce
	switch on resistance.
	* modules/gpsim_modules.cc, modules/resistor.cc,
	modules/resistor.h: minor clean ups
	* regression/switch_test/switch_test.asm: Additional
	comments. Tried to add a test to test switch on resistance...

2006-09-25 Borut Razem <borut.razem@siol.net>
	* src/sdc.vcproj, src/makefile.mingw: added pm_rd.* to the project

2006-09-21 Dave Barnett <dbarnett@edt.biz>
	* src/pm_rd.cc, src/pm_rd.h: Support for midrange device's program
	memory read feature.
	* p16x7x.cc, src/p16x7x.h, src/pic-processor.cc,
	src/pic-processor.h, src/Makefile.am:
	Added support for the P16F73 and P16F74
	* src/ssp.cc: Fixed typo in printf statement

2006-09-19 Scott Dattalo <scott@dattalo.com>
	* src/pic-processor.cc, src/p16f62x.cc, src/p16f62x.h: Added the
	p16f624 and the p16f624a

2006-09-19 Scott Dattalo <scott@dattalo.com>
	* src/pic-processor.cc, regression/p16f628/p16f628.asm: Added the
	p16f627a and p16f628a processors. Note that these are identical to
	the non-A versions.

2006-09-10 J.R. Heisey <jrheisey@sourceforge.com>
	* src/ValueCollections.h: Added indexing operator to class
	IIndexedCollection.
	* src/sim_context.cc,h: Added function CSimulationContext::
	GetCycleCounter().
	* src/modules.cc,h : Added functions to class ModuleLibrary:
	GetLibraryFileHandle() and GetLibraryFunction().
	* gui/gui_src_asm.cc, gui/gui_src.h:
	- Rescoped several functions into classes to help me keep track
	of their context. Especially the callbacks.
	- Implemented the popup menu items: Settings, Find PC, Move PC here,
	Run here, Breakpoint here, Profile start here, Profile stop here,
	and most importantly Add to Watch.
	- Note that the Font selection dialog doesn't seems to actually
	change the font. It appears to be the same with the old
	GUI. I haven't checked into it.
	- Changed the font selection dialog and the settings dialog
	to use the gtk_dialog_run() function. This fixed an issue
	when the close (upper right X) button was used the underlying
	window would be deallocated. This caused the window to never
	appear again requiring restarting gpsim.

2006-09-03 Scott Dattalo <scott@dattalo.com>
	* gui/gui_scope.cc, gui/gui_scope.h: Signal name editing now works.
	Screen updates for signal names have been fixed.

2006-09-03 Borut Razem <borut.razem@siol.net>
	* doc/gpsimWin32: glib-2.12.1, gtk+-2.8.20, cairo-1.2.2

2006-08-27 Scott Dattalo <scott@dattalo.com>
	* gui/gui_scope.cc, gui/gui_scope.h:
	- Time axis is now shown. Major and Minor tick marks and the
	corresponding grid lines are drawn.

2006-08-21 Scott Dattalo <scott@dattalo.com>
	* gui/gui.h: KeyEvent now differentiates presses and releases.
	* gui/gui_src.cc: Update KeyEvent objects.
	* gui/gui_scope.cc, gui/gui_scope.h: Numerous enhancements:
	  - Added support for markers
	  - Wave pixmaps are now 1024 pixels wide. This primarily fixes a
	  round off error in the binary search routine
	  - Scroll thumb now adjust size based on amount of waveform
	  plotted
	  - Hot key functionality:
	    z -- Zoom in
	    Z -- Zoom out
	    r -- pan right
	    l -- (lowercase ell) pan left
	  - Glitches are now plotted
	  - High frequency events (i.e. events for which there is
	  inadequate monitor resolution to completely show) are plotted in
	  a different color.
	  - Reomved the Pane widget - it was holding the waveforms and
	  just eating up space.
	  - Added WaveBase in anticipation of different types of
	  waveforms.
	* src/bitlog.h, src/bitlog.cc: The ThreeStateLogger can now return
	the number of events occurring between two time intervals or
	between two event indices. (Used for high frequency measuring).

2006-08-08 Scott Dattalo <scott@dattalo.com>
	* gui/gui_main.cc: Now scope window is updated when simulation
	stops.
	* gui/gui_src_asm.cc: Refresh gui menu when src window changes
	hidden state.
	* gui/gui_scope.cc: Redesigned scope window layout. Adding
	scrolling.

2006-08-06 Roy Rankin <rrankin@ihug.com.au>
	* regression/spi regression/spi/p16c62.asm regression/spi/16f88.lkr
	  regression/spi/p18f242.asm regression/spi/16c62.lkr
	  regression/spi/p16f88.asm regression/spi/Makefile
	  regression/spi/18f242.lkr regression/run_regression.sh
	  src/16bit-registers.h src/p16x6x.h src/p16x6x.cc
	  src/p16f87x.cc src/16bit-processors.cc src/ssp.h src/14bit-tmrs.h
	  src/ssp.cc src/ioports.cc src/14bit-tmrs.cc src/p18x.cc
	  src/16bit-registers.cc src/p16f8x.cc src/16bit-processors.h:
	- Serial Peripheral Interface (SPI)

2006-07-31 Scott Dattalo <scott@dattalo.com>
	* src/pic-ioports.cc: RBIF was not handled correctly when the
	change on interrupt was due to a write to PORTB.
	* regression/interrupts_14bit.asm: Add a check for the RBIF flag
	getting set correctly.
	* arc/p16x8x.cc: W was not getting added to the symbol table.

2006-07-30 Scott Dattalo <scott@dattalo.com>
	* cli/cmd_log.cc: Cleaned up help description.

2006-07-30 Scott Dattalo <scott@dattalo.com>
	* cli/parse.yy, cli/cmd_log.h, cli/cmd_break.cc, cli/cmd_break.h,
	  cli/cmd_log.cc, src/gpsim_object.cc, src/value.h, src/value.cc,
	  src/expr.h, src/expr.cc, src/trace.h, src/trace.cc,
	  src/registers.h, src/breakpoints.h, src/breakpoints.cc,
	  src/symbol.h, src/gpsim_object.h, src/operator.cc, src/operator.h,
	  src/symbol.cc:
	- Fixed logging. The logging feature has been broken for a long
	  time. The old code that performed logging has been mostly
	  removed. The new logging code is similar to the breakpoint
	  code. It  utilizes TriggerActions.to perform the logging
	  operations.
	- (The profiling feature is currently broken too. However, it
	  should be possible to utilize TriggerActions for profiling).

2006-07-30 Scott Dattalo <scott@dattalo.com>
	* gui/gui_scope.cc, gui/gui_scope.h: development snap - still not
	complete

2006-07-29 Borut Razem <borut.razem@siol.net>
	* cli/cli.vcproj, gpsim/gpsim.vcproj, gui/gui.vcproj,
	  modules/modules.vcproj: added cairo dependency, clening
	* plat/win32/libgpsim.def: MSVC sync
	* src/i2c-ee.c, modules/i2c-eeprom.c: removed compiler warnings

2006-07-26 Roy Rankin <rrankin@ihug.com.au>
	*  src/i2c-ee.h src/i2c-ee.cc modules/i2c-eeprom.cc
	   modules/i2c-eeprom.h modules/gpsim_modules.cc:
	- Added I2C EEprom modules for 24xx024, 24xx16b, 24xx256

2006-07-24 Borut Razem <borut.razem@siol.net>
	* cli/makefile.mingw, cli/cli.vcproj: define HAVE_SOCKETS -
	  sockets are enabled on WIN32
	* plat/win32/libgpsim.def, src/src.vcproj: MSVC sync
	* doc/gpsimWin32: glib-2.10.3, gtk+-2.8.18, pango-1.12.3

2006-07-23 Scott Dattalo <scott@dattalo.com>
	* cli/socket.cc: Re-enabled the socket interface.
	* examples/scripts/makefile: Hmm, for some reason pango is now
	required to build the examples.

2006-07-22 Rob Pearce <rob@bdt-home.demon.co.uk>
	* src/Makefile.am
	  Added a2dconverter.h to the headers list, so that it's included
	  in the tarball built by make dist

2006-07-14 Roy Rankin <rrankin@ihug.com.au>
	* src/p18x.h src/p18x.cc src/pic-instructions.cc
	  src/pic-processor.cc src/pic-processor.h:
	- P18F248 now based on P18F242, P18F448 added based on P18F424
	* src/p16x6x.cc: remove debug output

2006-07-12 Scott Dattalo <scott@dattalo.com>
	* cli/parse.yy, cli/input.cc: Previously, the parser would abort
	parsing upon detection of syntax errors. Now the parser will only
	ignore the erroneous lines. The difference mainly applies to scripts.

2006-07-11 Scott Dattalo <scott@dattalo.com>
	* gui/gui_scope.h, gui/gui_scope.cc: Added scope.zoom and
	scope.pan attributes that allow the image in the scope window to
	be panned and zoomed.
	* src/makefile.mingw: added the new psp.cc file.

2006-07-11 Roy Rankin <rrankin@ihug.com.au>
	* src/p16x6x.h src/p18x.h src/p16x6x.cc src/pic-ioports.h
	  src/Makefile.am src/psp.cc src/p18x.cc src/psp.h src/pic-ioports.cc
	  regression/psp/18f452.lkr regression/psp/16f871.lkr
	  regression/psp/p18f452.asm regression/psp/p16f871.asm
	  regression/psp/Makefile regression/run_regression.sh:
	- Add PSP functionality to 40 pin processors based on P16C64 & P18C4x2

2006-07-08 Scott Dattalo <scott@dattalo.com>
	* makefile.mingw, plat/win32/make.mingw: Created a 'make depend'
	rule for the win32 makefiles. Here's how it works; first create
	the dependency file:
	$ make -f makefile.mingw depend
	This will create a file named 'mf' in each directory. Now gpsim
	can be built by:
	$ make -f mf
	(Note: There is a bug with make depend in the modules directory).

2006-07-08 Scott Dattalo <scott@dattalo.com>
	* gui/gui_scope.cc, gui/gui_scope.h, gui/gui.h, gui/gui_src.cc:
	- Moved the KeyEvent class definition to gui.h.
	- Moved gui_scope local declarations to Scope_Window class.

2006-07-07 Scott Dattalo <scott@dattalo.com>
	* gui/gui_scope.cc: Added a GtkEntry widget to hold scope signal
	names. Now signals can be specified either through the GtkEntry or
	by the command line attributes.

2006-07-06 Scott Dattalo <scott@dattalo.com>
	* gui/gui_scope.cc: IOPINs can now be attached to scope
	channels. The attachment can only be made at the command line:
	 gpsim> scope.ch0="porta0"
	Everytime the state of porta0 is changed, the event will also be
	sent to the scope window where it will get logged and
	displayed. (Note, the quotes are necessary to prevent gpsim from
	evaluating the pin name.)
	* regression/logic_test/logic_test.asm: The logic OR gates
	connected to porta0,porta1,porta2,portc0 are now displayed in the
	scope window.

2006-07-05 Scott Dattalo <scott@dattalo.com>
	* src/stimuli.h, src/stimuli.cc: Added a virtual destructor to the
	PinMonitor class.
	* src/16bit-processors.h, src/16bit-processors.cc,
	src/pic-ioports.cc, src/processor.cc, src/gpsim_object.cc: minor
	changes to remove compiler warnings.
	* gpsim/CopyDlls.bat: This bat file copies the DLLs for the win32
	builds to the gpsim/gpsim. A few more DLLs were added to the list.

2006-07-05 Scott Dattalo <scott@dattalo.com>
	* plat/win32/make.mingw: Added an option to use ccache for mingw
	builds. Unfortunately, for this to work well the makefile
	dependencies also need to be implemented correctly.

2006-07-04 Roy Rankin <rrankin@ihug.com.au>
	* src/p16x6x.h src/p16x6x.cc src/p16f87x.cc src/p16f87x.h
	  src/pir.cc src/pir.h src/comparator.h src/a2dconverter.h
	  src/comparator.cc regression/comparator/compar_877a.asm:
	- Fixes involving PIR_SET

2006-07-03 Borut Razem <borut.razem@siol.net>
	* cli/cli.vcproj, src/src.vcproj, src/makefile.mingw,
	  plat/uxtime.cc, plat/uxsleep.cc, plat/uxtime.h: uxtime.cc splitted
	  to uxtime.cc and uxsleep.cc, since gettimeofday() is now declared
	  in mingw

2006-07-01 Scott Dattalo <scott@dattalo.com>
	* gui/gui_menu.cc, gui/gui_scope.cc, gui/gui_processor.cc,
	  gui/gui_main.cc:
	  - resurrected the scope window.
	  - ThreeStateEventLogger logs traced states.
	  - Implemented an efficient bisecting algorithm for mapping
	    events states onto the plotting window.
	  - Created attributes:
	    scope.ch0 - scope.ch7 specify nodes that are to be monitored
	    scope.start and scope.stop specify the range of time to be
	    viewed.
	  Currently, the scope window cannot display real data. Instead,
	  it will synthesize test data. The scope.start and scope.stop
	  attributes do work.
	* src/ioports.h, src/stimuli.h, src/stimuli.cc, src/ioports.cc:
	  - Moved the SignalSink class to stimuli.h
	  - Introduced addSink and removeSink methods to the PinMonitor
	    class.
	  - Removed references to 'OLD_IOPORT_DESIGN'
	* src/bitlog.cc, src/bitlog.h: The ThreeStateEventLogger class now
	  has a flag to indicate when the event buffer is
	  empty. Previously, a "bogus" time was placed at position 0,
	  however this broke the logic that searches for events at
	  particular times.
	* src/symbol.cc: Added a debug message.

2006-07-01 Scott Dattalo <scott@dattalo.com>
	* cli/Makefile.am: Applied patch 1470810 which adds the readline
	library to list of libraries linked with the cli library.

2006-06-22 Borut Razem <borut.razem@siol.net>
	* extras/usart_con/*: removed from svn
	* makefile.mingw, plat/win32/gpsim.nsi: removed usart_con
	* modules/usart.cc, modules/usart.cc: added possibility to write to
	  the console using the boolean attribute "console = true | false"
	* examples/modules/usart_gui/usart_gui.asm: send only '\n' for the
	  newline, introduced putchar procedure, ...

2006-06-21 Roy Rankin <rrankin@ihug.com.au>
	* regression/usart_test/usart_pir1v1.asm,
	  regression/usart_test/usart_pir1v2.asm:
	- Check PIC TX pin is high when first set to output.
	* src/pic-ioports.cc: Portb, allow driving state to be set
	  even when bit is set.
	* src/tmr0.cc: Fix call of clear_break.

2006-06-16 Scott Dattalo <scott@dattalo.com>
	* src/14bit-tmrs.h, src/14bit-tmrs.cc: TMR2 wasn't getting
	properly initialized when the TMR2ON bit in T2CON was getting set.
	* TODO: Removed the "Source Browser Search" todo item

2006-06-13 Borut Razem <borut.razem@siol.net>
	* CVSROOT: removed the CVS left-over
	* extras/usart_con/usart_con.cc: print control characters in <%02X>
	  format
	* gui/gui_src_asm.cc: added strcasestr() function

2006-06-16 Scott Dattalo <scott@dattalo.com>
	* TODO: Cleaned up the TODO list.
	* gui/gui_src_asm.cc, gui/gui_src.h: Implemented the Source
	Browser "Find" dialog box. When the new source browser had been
	re-written, this feature was ommitted. The dialog supports forward
	and backward searches and case sensitivity. The search history
	feature is not currently working (was it ever?). Also, it'd be
	useful to have a "search all files" feature.
	* gui/gui_menu.cc: Minor change to TextStyle API.

2006-06-13 Scott Dattalo <scott@dattalo.com>
	* src/sim_context.cc, cli/input.cc, cli/cmd_load.cc: Rewrote code
	to get around a gcc 3.2.2 x86 bug regarding the mis-handling of
	const char * types (the ECX register was getting clobbered!).

2006-06-13 Borut Razem <borut.razem@siol.net>
	* src/os_dependent.c, src/modules.h, src/modules.cc:
	  reverted cahanges for fix:
	  [ 1488107 ] const violation in get_error_message()
	  since dlerror() returns const char * on FreeBSD
	* pic_processor.h: fixed warning
	  multiple default constructors specified
	* plat/win32/libgpsim.def: MSVC sync
	* doc/gpsimWin32.html: patched gtk+extra-2.1.1-src-20060611.zip

2006-06-12 Roy Rankin <rrankin@ihug.com.au>
	* regression/usart_test/usart_pir1v1.asm
	  regression/usart_test/16f628.lkr
	  regression/usart_test/usart_pir1v2.asm
	  regression/usart_test/Makefile regression/run_regression.sh:
	- Improve USART regression tests
	* regression/usart_test/usart_test.stc
	  regression/usart_test/usart_test.asm: removed as redundant
	* src/uart.cc src/uart.h: receive baud rate fix
	* modules/usart.cc modules/usart.h: Transmit baudrate fix,
	  loop attribute added, receiver rewritten to remove event logger.

2006-06-10 Robert Pearce <rob@bdt-home.demon.co.uk>
	* doc/gpsim.lyx: Some hacked notes on creating new modules, and a few
	 other tweaks

2006-06-10 Roy Rankin <rrankin@ihug.com.au>
	* src/gpsim_time.h src/stimuli.cc src/gpsim_time.cc src/processor.cc
	  src/14bit-registers.cc: cycles_per_second changed to instruction_cps
	* src/cod.cc: prevent duplicate symbol messages from static .cod file
	  by not loading constants
	* gui/gui_stopwatch.cc: remove magic number, Frequency format change
	* src/pir.cc src/pir.h: RCIF not being set by uart
	* src/uart.cc modules/usart.cc: fix baud rate error

2006-06-03 Scott Dattalo <scott@dattalo.com>
	* src/16bit-processors.cc: The newly added config words were
	  placed at word addresses instead of byte addresses.
	* src/pic-instructions.cc: Removed warning in CLRWDT instruction
	  that said 16bit wdt timer is not implemented.
	* src/hexutils.cc: removed ifdef'd out code

2006-06-03 Scott Dattalo <scott@dattalo.com>
	* cli/parse.yy, cli/input.cc, cli/input.h, cli/cmd_load.cc:
	  Added an option to the load command to allow processors to be
	  named. Eg:

	  gpsim> load test.cod U1   # Assign U1 ref. des. to processor

	* src/processor.h, processor.cc,
	  src/p16x6x.h, src/p16x6x.cc,
	  src/p16f87x.h, src/p16f87x.cc,
	  src/16bit-processors.h, src/16bit-processors.cc,
	  src/pic-processor.h, src/pic-processor.cc,
	  src/p16f62x.h, src/p16f62x.cc,
	  src/p16x5x.h, src/p16x5x.cc,
	  src/p16x7x.h, src/p16x7x.cc,
	  src/12bit-processors.h, src/12bit-processors.cc,
	  src/p12x.h, src/p12x.cc,
	  src/p18x.h, src/p18x.cc,
	  src/processor.h, src/processor.cc,
	  src/p16x8x.h, src/p16x8x.cc,
	  src/p16f8x.h, src/p16f8x.cc,
	  src/14bit-processors.h,src/14bit-processors.cc,
	  src/dspic/dspic-processors.cc, src/dspic/dspic-processors.h:

	Pic processors now can be named when instantiated.

	* gui/gui_menu.cc: Adhere to the new calling convention for gpsim_open.

	* src/hextutils.h, src/hexutils.cc, src/program_files.cc, src/program_files.h,
	  src/sim_context.h, src/sim_context.cc, src/cod.cc: New
	calling convention for LoadProgramFile

	* src/os_dependent.cc: There appeared to be a compiler bug
	IsFileExtension() (a const pointer in the callee's stack space was
	getting modified). But, there is a built in STL function that does
	the same thing IsFileExtension() was doing, so that's now used.

	* regression/ttl/ttl377.stc: added
	* regression/ttl/Makefile, regression/comparator/compar_877a.stc,
	  regression/comparator/compar_628.stc,
	  regression/comparator/compar_873a.stc,
	  regression/p16f84/p16f84.stc,
	  regression/switch_test/switch_test.stc,
	  regression/switch_test/switch_test.asm,

2006-06-03 Roy Rankin <rrankin@ihug.com.au>
	* src/stimuli.cc, src/stimuli.h: New resistor-capacitor transient
	  voltage calculation implemented and activated, getBitChar function
	  re-written.
	* modules/switch.cc, modules/switch.h,
	  regression/switch_test/switch_test.asm:
	- Switch module model changed eliminating Rclosed parameter

2006-03-02 Borut Razem <borut.razem@siol.net>
	* extras/graphic_lcd/makefile.mingw, plat/win32/gpsim.nsi:
	  graphic_lcd.dll renamed to libgpsim_graphicLCD.dll
	* extras/lcd/examples/lcd_mod.stc:
	  libgpsim_lcd.so changed to libgpsim_lcd

2006-05-31 Scott Dattalo <scott@dattalo.com>
	* src/p16x6x.h, src/16bit-processors.cc, src/14bit-registers.h,
	  src/processor.h, src/pic-registers.h, src/pic-processor.cc,
	  src/pic-processor.h, src/p16x8x.h, src/pic-registers.cc,
	  src/breakpoints.cc, src/12bit-processors.h,
	  src/14bit-processors.cc, src/14bit-processors.h:

	Accesses to CONFIG2H now can control the WDT. A couple of new
	members were added to the WDT class to support the new reading and
	writing. Also, some minor class clean up was also performed.

2006-05-31 Borut Razem <borut.razem@siol.net>
	* Implemented enhancement request
	  [ 1496325 ] To bundle the extra modules with gpsim-win32 snapshot
	  makefile.mingw: added targets extras, clean_extras
	  extras/graphic_lcd/makefile.mingw, extras/lcd/makefile.mingw,
	  extras/usart_com/makefile.mingw: introduced GPSIM_LIB_PATH,
	  GPSIM_INCLUDE_PATH, GPSIM_DEF_PATH variables
	  plat/win32/gpsim.nsi: added potion to install extras modules

2006-05-28 Borut Razem <borut.razem@siol.net>
	* src/os_dependent.c, src/modules.h, src/modules.cc,
	  src/sim_context.cc:
	  fixed [ 1488107 ] const violation in get_error_message()

2006-05-29 Robert Pearce <rob@bdt-home.demon.co.uk>
	* regression/resistor/resistor.asm: improved failure reporting
	  and added tests for the output pin not being swamped
	* src/stimuli.cc, src/stimuli.h: Adjusted default Zth values to
	  be more sensible (ZthWeak now > ZthPullUp). Also some debug
	  messages on wht looks like a dodgy condition. Need to follow up.
	* doc/gpsim.lyx: corrected some formatting.

2006-05-28 Borut Razem <borut.razem@siol.net>
	* plat/win32/gpsim.nsi: removed unneeded asprintf.dll from
	  the package, added possibility to define the SETUP_DIR from
	  the NSIS command line
	* doc/gpsimWin32.html: glib-2.8.6, gtk+-2.8.17, pango-1.12.1,
	  cairo-1.0.4
	* extras/graphic_lcd/src/gpsim_modules.cc,
	  extras/graphic_lcd/src/sed1520.cc,
	  extras/lcd/hd44780.cc: removed unneeded inclusion of config.h
	* extras/graphic_lcd/makefile.mingw: added, thanks to Xiaofan Chen
	* extras/lcd/makefile.mingw: corrected, thanks to Xiaofan Chen
	* makefile.mingw: added rules doc and setup
	* plat/win32/fd2raw.cpp: report error messages

2006-05-28 Roy Rankin <rrankin@ihug.com.au>
	* src/gpsim_object.cc: Improve GNU demangling
	* modules/switch.cc, modules/switch.h,
	  regression/switch_test/switch_test.asm:
	- Fix infinite regression bug.

2006-05-27 Scott Dattalo <scott@dattalo.com>
	* src/ValueCollections.cc, src/ValueCollections.h,
	src/14bit-registers.cc: An indexed collection can now accommodate
	a disjoint set.
	* src/16bit-processors.h, src/16bit-processors.cc,
	src/dspic/dspic-processors.cc, src/dspic/dspic-processors.h,
	src/processor.h, src/processor.cc, src/pic-processor.h,
	src/14bit-processors.h,src/14bit-processors.cc,
	src/pic-processor.cc: The ProgramMemoryClass now uses the newly
	added "disjoint set" feature of an IndexedCollection to provide
	access to configuration memory. E.g.

	  romData[0x300000] = 0x1234

	will write 0x1234 to the configuration word at address 0x300000.
	In addition, infrastructure has been added to symbolically deal
	with configuration memory. E.g.

	  gpsim> .CONFIG1H
	  $00000027

	  gpsim> help .CONFIG2H
	  $0000000f
	  WatchDog configuration

	Currently the configuration memory does not control any
	thing. I.e., if you write to config memory, the data changes, but
	the processor configuration is not actually changed.

	* src/hexutils.cc: removed printf debugging.

2006-05-25 Scott Dattalo <scott@dattalo.com>
	* modules/stimuli.h, modules/stimuli.cc: More support for
	  file stimulus.

2006-05-25 Scott Dattalo <scott@dattalo.com>
	* modules/logic.h, modules/logic.cc, modules/gpsim_modules.cc:
	Only use if the gui is enabled

2006-05-25 Scott Dattalo <scott@dattalo.com>
	* modules/switch.h, modules/switch.cc, modules/gpsim_modules.cc:
	  Only use gui if enabled.
	* modules/stimuli.h, modules/stimuli.cc: Began adding support for
	  file stimulus.

2006-05-24 Borut Razem <borut.razem@siol.net>
	* modules/makefile.mingw, modules/modules.vcproj: added stimuli.*
	* plat/win32/libgpsim: MSVC sync

2006-05-23 Borut Razem <borut.razem@siol.net>
	* doc/gpsimWin32.html: CVS replaced with Subversion

	* src/14bit-tmrs.h, src/14bit-tmrs.cc:
	- PWM fixes CCP high if duty cycle 0, CCPRnH loaded on TMR2
	  compare, PWM starts after first TMR2 compare, PMR2::put
	  and PR2::put rewrite
	* regression/ccp/pwm_877a.asm, regression/ccp/Makefile,
	  regression/run_regression.sh: PWM regression

2006-05-21 Scott Dattalo <scott@dattalo.com>
	* modules/stimuli.h, modules/stimuli.cc: New files for 'extended'
	stimuli. Currently only an asynchronous stimulus replacement
	called 'pulsegen' has been created.
	* modules/Makefile.am, modules/gpsim_modules.cc: Added pulsegen to
	the default list of modules.
	* regression/run_regression.sh, regression/wavegen/16f877a.lkr,
	regression/wavegen/Makefile, regression/wavegen/pulsegen.asm,
	regression/wavegen/pulsegen.stc: New regression test to test the
	pulsegen module. (This test is really just a copy of the ccp
	regression test except that the asynchronous stimulus has been
	replaced with a pulsegen module).
	* src/symbol.cc: Module symbol descriptions were not getting
	printed
	* cli/cmd_break.cc: removed bogus warning about cycle break points
	not getting set.

2006-05-21 Robert Pearce <rob@bdt-home.demon.co.uk>
	* src/p16f87x.h, src/p16f87x.cc: Re-worked 16F871 to be derived from
	  16C64 rather than 74, because that's the easiest way I could find to
	  fix the RAM size (it had way too much) and the stray CCP2

2006-05-19 Scott Dattalo <scott@dattalo.com>
	* src/expr.h, src/expr.cc: Added LiteralArray class for (better)
	  handling array types.
	* cli/parse.yy, cli/scan.ll: experimenting with user-created typed
	  symbols.
	* src/processor.cc: Removed bogus check that prevented users from
	  over-writing the Rom contents. If the user wants to over write
	  ROM then they should be allow to!

2006-05-19 Roy Rankin <rrankin@ihug.com.au>
	* src/14bit-tmrs.cc: TMR2 counts down not up, period wrong,
	  fix 2 PWM with same duty cycle
	* src/p16f8x.cc: CCP1 pin determined by confguration word
	* src/p16x6x.cc: fix core dump for CCP2

2006-05-17 Scott Dattalo <scott@dattalo.com>
	* regression/run_regression.sh: added regression test for ccp
	peripheral. This test only tests capture modes for the CMCON
	settings of 4,5,6, and 7.
	* regression/16f877a.lkr, regression/ccp_877a.asm,
	regression/ccp_877a.stc, regression/Makefile: new files for the
	ccp regression test.

2006-05-14 Borut Razem <borut.razem@siol.net>

	* src/makefile.mingw, src/vcproj: added 16f87 and 16f88 processors
	* modules/makefile.mingw: added i2c-eeprom
	* src/p12x.cc: removed unused variable
	* src/i2c-ee.cc: fixed warning:
	  In member function `virtual bool I2C_EE::processCommand(unsigned int)':
	  warning: control reaches end of non-void function;
	  fixed MSVCcompilation
	* plat/win32/libgpsim.def: MSVC sync

2006-05-14 Scott Dattalo <scott@dattalo.com>
	* src/value.h, src/value.cc, src/expr.cc: Expressions derived from
	the base gpsim types (like Integer, Float) were not getting
	evaluated properly.

2006-05-14 Roy Rankin <rrankin@ihug.com.au>
	* regression/a2d/p16f874a.asm, regression/a2d/p16c71.asm,
	  regression/a2d/16f871.lkr, regression/a2d/16f874a.lkr,
	  regression/a2d/p18f452.asm, regression/a2d/p16f88.asm,
	  regression/a2d/p16f871.asm, regression/a2d/Makefile,
	  regression/a2d/p16f873a.asm, regression/run_regression.sh,
	  src/p16f87x.cc, src/p16f87x.h, src/16bit-processors.cc,
	  src/p16f62x.cc, src/p16x7x.cc, src/p18x.cc, src/a2dconverter.cc:
	- tests and correction to a2d for various processors

2006-05-14 Roy Rankin <rrankin@ihug.com.au>
	* src/16bit-registers.h, src/14bit-registers.h, src/pic-processor.cc,
	  src/Makefile.am, src/pic-processor.h, src/14bit-registers.cc,
	  src/p16f8x.h, src/p16f8x.cc,
	  regression/a2d/Makefile, regression/run_regression.sh,
	  regression/a2d/16f88.lkr, regression/a2d/p16f88.asm:
	- Add 16f87 and 16f88 processors

2006-05-13 Scott Dattalo <scott@dattalo.com>
	* src/a2dconvert.h: removed redundant class qualifiers in member
	function declarations.

2006-05-13 Scott Dattalo <scott@dattalo.com>
	* src/processor.h, src/processor.cc, gui/gui_src_opcode.cc: Added
	romData[] accessor (analogous to ramData) to provide a way of
	querying and modifying the program memory. So now you can change
	program memory from the command line:
	gpsim> romData[address] = value
	Address and value can be symbols.

2006-05-12 Robert Pearce <rob@bdt-home.demon.co.uk>
	* regression/run_regression.sh, regression/txisr_test/...:
	 Added a test for the correct behaviour of usart transmit interrupts

2006-05-11 Robert Pearce <rob@bdt-home.demon.co.uk>
	* src/p16f87x.cc: A2D converter fixes for the 16f871.

2006-05-10 Scott Dattalo <scott@dattalo.com>
	* src/pir.h, src/pir.cc: Applied patch (with modifications) from
	Robert Pearce that adds the concept of 'writable' PIR register
	bits versus 'valid' ones.

2006-05-10 Scott Dattalo <scott@dattalo.com>
	* src/16bit-hexdecode.cc, src/p16x6x.h, src/i2c-ee.h,
	src/p16x6x.cc, src/p16f87x.cc, src/16bit-processors.cc,
	src/i2c-ee.cc, src/eeprom.cc, src/pir.cc, src/p16f62x.cc,
	src/pie.cc, src/pir.h, src/p16x7x.cc, src/p18x.cc, src/value.cc,
	src/eeprom.h, src/16bit-registers.cc:
	- Redesigning PIR logic. The existing design requires numerous
	manuel configurations that are subject to error. The new design
	attempts to encapsulate the PIR configuration within the PIR
	classes.

2006-05-10 Scott Dattalo <scott@dattalo.com>
	* modules/i2c-eeprom.h, modules/i2c-eeprom.h, Makefile.am,
	src/p12x.h, src/p12x.cc: Began designing a gpsim I2C module.

2006-05-08 Borut Razem <borut.razem@siol.net>

	* extras/usart_con.cc: sync with modules/usart.cc

2006-05-08 Roy Rankin <rrankin@ihug.com.au>
	* src/comparator.h, src/comparator.cc, src/p16f62x.cc:
	- rewritten so comparator processor differences in processor class
	* src/p16x6x.cc: portc register removed from p16f62x
	* src/p16f87x.cc, src/p16f87x.h: a2d added, comparator change
	* src/16bit-processors.cc, src/p16x7x.cc src/a2dconverter.h,
	  src/a2dconverter.cc: code change for pending p16f88
	* regression/a2d/Makefile, regression/run_regression.sh,
	  regression/a2d/16f873a.lkr, regression/a2d/p16f873a.asm:
	- add a2d regression for p16f873a

2006-05-06 Scott Dattalo <scott@dattalo.com>
	* src/stimuli.cc, src/stimuli.h, cli/cmd_stimulus.cc: Stimuli
	parameters are now initialized with Values instead of doubles.

2006-05-06 Scott Dattalo <scott@dattalo.com>
	* modules/usart.h, modules/usart.cc:
	 - Added the boolean attribute 'crlf'. If this is set true, then
	 carriage returns and line feeds will generate new lines in the
	 gui terminal window.

2006-05-06 Robert Pearce <rob@bdt-home.demon.co.uk>
	* modules/usart.h, modules/usart.cc:
	 - Usart GUI now displays non-printable characters as <%02X>.
	 - The usart module now supports a transmit FIFO. This allows
	 transmit data to be queued while the simulation is stopped.

2006-04-30 Roy Rankin <rrankin@ihug.com.au>
	* gui/gui_src.h gui/gui_src_asm.cc: fix ungisgned - signed compile
	  warnings
	* gui/gui_breadboard.cc: get trace working again
	* gui/Makefile.am: remove unused and incorrect defines

2006-04-29 Scott Dattalo <scott@dattalo.com>
	* modules/switch.cc, modules/switch.h,
	regression/switch_test/switch_test.asm:  Moved pin functionality
	from the Switch class into the Switch_Pin class.

2006-04-29 Robert Pearce <rob@bdt-home.demon.co.uk>
	* src/value.cc: Fixed Float type check error.

2006-04-29 Roy Rankin <rrankin@ihug.com.au>
	* src/gpsim_object.h src/gpsim_object.cc src/stimuli.cc
	  src/stimuli.h gui/gui_breadboard.h gui/gui_breadboard.cc:
	- GUI pin rename code - rewritten and moved into IOPIN class
	* src/comparator.h src/comparator.cc p16f62x.cc:
	- Do dynamic GUI pin renaming
	* gui/Makefile.am: remove unused and incorrect defines
	* src/processor.cc: Set 4 clock cycles per instruction cycle
	* regression/comparator/compar_628.asm: Start by turning off comparators

2006-04-28 Borut Razem <borut.razem@siol.net>
	* modules/makefile.mingw, modules/modules.vcproj,
	  plat/win32/libgpsim.def, extras/lcd/makefile.mingw,
	  plat/win32/gpsim.nsi: WIN32 sync

2006-04-26 Scott Dattalo <scott@dattalo.com>
	* modules/switch.cc, modules/switch.h, modules/gpsim_modules.cc:
	- Added On-resistance and Off-resistance attributes to the switch
	module. (They're called Ropen and Rclosed).
	- The switch module code now resides in the 'Switches' namespace.
	* modules/resistor.cc:
	- The resistor module now initializes itself with the gpsim
	default attributes (which for now are only xpos and ypos).

	* regression/switch_test/switch_test.asm,
	regression/switch_test/switch_test.stc:
	Moved the switch regression test configuration script into the
	switch_test.asm source

2006-04-24 Scott Dattalo <scott@dattalo.com>
	* src/ioports.cc, src/ioports.h: Fully deprecated the IOPORT
	class. The old IOPORT class is still present, but conditionally
	disabled.
	* modules/logic.cc, modules/usart.cc, modules/logic.h,
	modules/switch.cc, src/stimuli.cc, src/stimuli.h, src/cod.cc,
	src/comparator.h, src/i2c-ee.cc: Removed all references to the
	IOPORT class.

2006-04-23 Scott Dattalo <scott@dattalo.com>
	* src/gpsim_object.h, src/gpsim_object.cc: Removed TRUE and FALSE
	definitions.

2006-04-23 Roy Rankin <rrankin@ihug.com.au>
	* src/gpsim_object.h src/gpsim_object.cc gui/gui_breadboard.h
	  gui/gui_breadboard.cc: Allow pin names to be changed after breadboard
	  is started.
	* src/stimuli.cc: minor output format change and new debuging output

2006-04-22 Roy Rankin <rrankin@ihug.com.au>
	* modules/switch.cc modules/switch.h: fix windows regression problem

2006-04-17 J.R. Heisey <jrheisey@sourceforge.com
	* cli/cmd_module.cc, src\os_dependent.cc: Changed env var
	from GPSIMPATH to GPSIM_MODULE_PATH.

2006-04-17 Scott Dattalo <scott@dattalo.com>
	* modules/gpsim_modules.cc, modules/push_button.cc,
	modules/resistor.cc, modules/push_button.h, modules/resistor.h,
	modules/encoder.cc, modules/encoder.h, modules/Makefile.am:
	- Removed references to the deprecated IOPORT class.
	- Temporarily removed the video and the parallel_port modules (I
	  don't have a way to test them).
	- The push button module can now be used again.

2006-04-17 Borut Razem <borut.razem@siol.net>
	* config_win32.h.in: added the explanation why the warning is good:
	  warning: `I' flag used with `%x' printf format
	* cli/cli.vcproj, modules.vcproj, modules/makefile.mingw,
	  plat/win32/libgpsim.def: WIN32 sync

2006-04-16 Scott Dattalo <scott@dattalo.com>
	* modules/binary_indicator.cc,h: removed from gpsim. This module
	did absolutely nothing.
	* modules/gpsim_modules.cc, modules/Makefile.am: removed
	references to the binary_indicator.

2006-04-16 Scott Dattalo <scott@dattalo.com>
	* modules/ttl.cc: TTLbase now calls initializeAttributes(). This
	defines xpos and ypos attributes.
	* regression/ttl/ttl377.asm: xpos and ypos are initialized by the
	builtin script.
	* modules/led.cc, modules/led.h: Redesigned I/O pins to remove
	references to the deprecated IOPORT class.
	* modules/gpsim_modules.cc: Place Led classes in their own
	namespace.

2006-04-16 Borut Razem <borut.razem@siol.net>
	* config_win32.h.in: fixed bug [ 1470012 ] Breakpoints regression
	  test crashes mingw gpsim
	* modules/makefile.mingw, modules/modules.vcproj: WIN32 sync

2006-04-16 Scott Dattalo <scott@dattalo.com>
	* modules/gpsim_modules.cc, modules/Makefile.am, modules/ttl.cc,
	modules/ttl.h: Began a TTL module. Right now it contains only a
	'377.
	* regression/run_regression.sh, regression/ttl/18f452.lkr,
	regression/ttl/Makefile, regression/ttl/ttl377.asm: Regression
	test for the newly added '377 module in the ttl library.
	* src/modules.h, src/modules.cc, gpsim_object.cc: Modules can now
	be constructed with a name and a description.

2006-04-15 Scott Dattalo <scott@dattalo.com>
	* regression/switch_test/switch_test.asm: corrected 'capacitance'

2006-04-15 Borut Razem <borut.razem@siol.net>
	* cli/cli.vcproj, cli/makefile.mingw: added define YYSTACK_USE_ALLOCA
	* src/a2dconverter.*: svn:keywords=Author Date Id Revision,
	  svn:eol-style=native
	* src/a2dconverter.cc: corrected include path to "../config.h"
	* regression/switch_test/switch_test.stc: corected 'capacitance'

2006-04-15 Scott Dattalo <scott@dattalo.com>
	* src/16bit-registers.h, src/16bit-processors.cc,
	  src/16bit-registers.cc, src/16bit-processors.h, src/p18x.cc,
	  src/a2dconverter.cc:
	  A2D is now working (but not fully tested) for the 16bit core.
	* src/pir.h: Redesigned PIR base class in the first attempt in
	  removing PIR_SET classes
	* src/symbol.cc, src/stimuli.cc: Fixed symbol table dump.
	* regression/a2d/Makefile, regression/a2d/p18f452.asm: Regression
	  test for the 18f452 A2D converter.
	* modules/resistor.cc: Made 'Capacitance' attribute lower case.

2006-04-13 Scott Dattalo <scott@dattalo.com>
	* gui/gui_src_asm.cc: removed debug printf
	* modules/resistor.cc: Added module description.
	* src/a2dconvert.cc: Added a verbose mode printf debug statement.
	* src/p16x7x.cc: P16C71 class now sets A2D converter bits.
	* src/symbol.cc, src/symbol.h: module_symbol can now display a
	module description.
	* regression/run_regression.sh: added A2D regression test for the
	p16c71.
	* a2d/Makefile, a2d/p16c71.asm, a2d/16c71.lkr: A2D regression test
	for the 16c71.

2006-04-13 Borut Razem <borut.razem@siol.net>
	* gui/gui_src_asm.cc: removed warnings
	* modules/switch.h, src/dspic/dspic-processors.h, src/operator.h:
	  enable compilation on Fedora Core 5 (gcc 4.1.0)
	* regression/comparator/compar_628.stc,
	  regression/comparator/compar_673a.stc,
	  regression/comparator/compar_677.stc,
	  regression/eeprom_wide/eeprom_wide.stc: changed libgpsim_modules.so
	  with libgpsim_modules so that it runs on WIN32
	* src/makefile.mingw, src/src.vcproj, plat/win32/libgpsim.def: WIN32 sync

2006-04-13 Scott Dattalo <scott@dattalo.com>

	* src/Makefile.am, src/a2dconverter.h, src/a2dconverter.cc: New
	Files.
	* src/p16f87x.cc, src/p16x7x.h, src/p16x7x.cc:  Removed
	a2d-specific stuff from p16x7x.[h,cc] and placed it into
	a2dconverter.[h,cc].
	Also, the p16c71 doesn't have a PIR register. The INTCON class
	assumes that there is one. So a special (non-existant) PIR
	register has been created that is not instantiated in the register
	map, but is capable of communicating PIR-specific information with
	those peripherals that implement their own PIR functionality (this
	is currently only the P16C71 A2D module).
	* src/pir.h: The PIR_SET used to be a pure virtual base
	class. This class needs to be redesigned...
	* src/pir.h: Made class members private.
	* src/gpsim_object.h, src/gpsim_object.cc, src/value.h,
	src/value.cc: Moved Value descriptions into the parent gpsimObject
	class. The purpose of this change is to provide a uniform way in
	which gpsimObjects (like processors and modules) can describe
	themselves.

	* modules/resistor.cc: Added a voltage attribute to pull up
	resistors. Now pullup resistors can be used as general purpose
	voltage sources.

2006-04-11 Scott Dattalo <scott@dattalo.com>
	* gui/gui_src_asm.cc: Double clicks in the source browser were
	causing segv's

2006-04-11 Scott Dattalo <scott@dattalo.com>
	* gui/gui_src.h, gui/gui_src_asm.cc: Right-button mouse clicks now
	bring up a menu. Currently, not all of the menu items are
	supported. Furthermore, only GtkTextTag'd text responds.

2006-04-11 Roy Rankin <rrankin@ihug.com.au>
	* src/p16f87x.cc: if code read with breadboard closed, breadboard
	  did not show processor.
	* src/pic-ioports.cc: fix portb does not show high inputs if register
	  bits cleared from assembler code.
	* regression/rt.sh: allow multiple tests in one directory
	* regression/run_regression.sh: run comparator tests seperatly
	* src/comparator.cc: cleanup compiler warnings

2006-04-08 Scott Dattalo <scott@dattalo.com>
	* cli/scan.cc: removed from SVN. This autogenerated by flex from
	scan.ll.

2006-04-09 Borut Razem <borut.razem@siol.net>
	* extras/graphic_lcd/utils/custom.png,
	  extras/graphic_lcd/utils/fontimage.png,
	  extras/graphic_lcd/utils/gpsim1.png,
	  extras/graphic_lcd/utils/konqueror.png,
	  extras/graphic_lcd/utils/konqueror16X16.png,
	  extras/graphic_lcd/utils/konqueror3.png: mime-type image/png
	* src/src.vcproj, src/makefile.mingw:
	  new files src/comparator.h src/comparator.cc
	* gui/gui_menu.cc, gui/gui_profile.cc, gui/gui_regwin.cc,
	  gui/gui_src_asm.cc, gui/gui_watch.cc, modules/logic.cc,
	  modules/resistor.cc, modules/switch.cc, modules/usart.cc,
	  src/dspic/dspic-registers.cc, src/intcon.cc, src/ioports.cc,
	  src/pic-instructions.cc:
	  removed unused variables, #if 0-ed unused functions
	  removed warnings:
	    XXXX.h: In constructor `xxxx':
	    XXXX.h:LLL: warning: `yyyy' will be initialized after
	    XXXX.h:LLL: warning:   `zzzz'
	    XXXX.cc:LLL: warning:   when initialized here

2006-04-08 Scott Dattalo <scott@dattalo.com>
	* ChangeLog: experimental SVN checkin.

2006-04-08 Scott Dattalo <scott@dattalo.com>
	* INSTALL: re-instated - somehow it got wiped out on 04-05
	* ltconfig, missing, mkinstalldirs, stamp-h.in: removed from CVS.

2006-04-08 Roy Rankin <rrankin@ihug.com.au>
	* src/cod.cc src/sim_context.cc: backout Pin names changing in
	  2006-04-05 patch until better method can be found.
	* gui/gui_regwin.cc: fix core dump of ram window and ascii part of
	  register windows not showing all characters.
	* src/p16f87x.cc: fix eeprom being initialized twice for most
	  p16f87x processors.

2006-04-08 Roy Rankin <rrankin@ihug.com.au>
	* src/pic-processor.h src/pic-processor.cc src/p16f87x.h
	  p16f87x.cc: Add support for p16f87xA which are p16f87x
	  with 2 comparators and vref.
	* src/p16f62x.h src/p16f62x.cc src/Makefile.am src/pir.cc src/pir.h:
	  new files src/comparator.h src/comparator.cc
	  to add comparator and vref functions.
	* new directory regression/comparator with new files
	  compar_628.asm compar_628.stc compar_877a.asm
	  compar_877a.stc compar_873a.asm compar_873a.stc
	  Makefile 16f628.lkr 16f877a.lkr 16f873.lkr
	  for comparator regression tests.
	* regression/run_regression.sh: invoke comparator regression tests

2006-04-05 Roy Rankin <rrankin@ihug.com.au>
	* src/ioports.h src/ioports.cc : Fix setEnableMask() so it works
	  when pin is already added. Stop memory leak in newDefaultControl().
	* src/pic-ioports.cc: setTris() can be run multiple times.
	* src/p16f62x.cc src/cod.cc: Correct error in Oscillator configuration
	  bit processing. Pins 5, 6 and 7 of port A may be I/O depending on
	  configuration bits. Pin names changed depending on configuration
	  bits.
	* src/p16x6x.cc: Bit 5 of port A is I/O for all of 16X6x family
	  p16x63 and higher.
	* src/eeprom.h src/eeprom.cc src/p16f87x.cc: fix bugs in writing to
	  EEPROM and added FLASH program writing using wide mode (p16f87x).
	* regression/run_regression.sh: add directory regression/eeprom_wide
	  with files Makefile, 16f873.lkr, eedate_wide.asm and eeprom_wide.stc
	  for regression testing of EEPROM and FLASH single byte wide
	  read-write operations.

2006-03-30 Scott Dattalo <scott@dattalo.com>
	* gui/gui_regwin.cc: In 03-27 changes, a variable initialization
	got commented out and caused a segv on some systems

2006-03-30 Scott Dattalo <scott@dattalo.com>
	* src/14bit-registers.h, src/14bit-registers.cc: Resetting the
	program counter low register (PCL) was causing the cycle counter
	to advance by one.

2006-03-29 Scott Dattalo <scott@dattalo.com>
	* gui/gui_src_asm.cc, gui/gui_src.h:
	Source files are now only parsed whenever they're brought into
	view. (The previous commit parsed the source, but only placed it
	into a gtk_text_view whenever the source was brought into view).

	* src/processor.cc: Config addresses in the .lst file were causing
	a segv when the list file was processed.

2006-03-28 Scott Dattalo <scott@dattalo.com>
	* gui/gui_src_asm.cc, gui/gui_src.h:
	- If there are many source files, the notebook will now allow the
	tabs to be scrolled.
	- Source files are now only rendered whenever the page in which
	they reside is brought into view. (Otherwise, large projects will
	take a very long time to load).

2006-03-27 Scott Dattalo <scott@dattalo.com>
	* gui/gui_watch.cc:
	- Watch window was causing segv for the case when a watched
	register did not have an entry in the symbol table.
	- Fixed a bug where the "hex" attribute was being repeatedly added
	to the eXdbm data base. Note this fix was only applied to
	non-WIN32 OSes
	* gui/gui_regwin.cc, gui/gui_regwin.h: The register window cells
	were not getting resized correctly whenever the font was
	changed. Also, the default font was changed to Monospace.

2006-03-24 Scott Dattalo <scott@dattalo.com>
	* src/symbol.h, src/symbol.cc: Added a convenience function for
	searching the symbol table for strings.
	* src/processor.h, src/processor.cc: Change FileContext::Add
	method to accept only a const char *.

2006-03-24 Scott Dattalo <scott@dattalo.com>
	* src/processor.h, src/processor.cc: The FileContext class now
	handles list files.
	* gui/gui_src_asm.cc, gui/gui_src.h, gui/gui_menu.cc: Breakpoints
	can be manipulated through the list file view of the source
	browser.
	Switching pages in the source browser now updates the margin.
	The preferences editor 'Margins' and 'Tabs' were combined into
	just 'Margins'.

2006-03-22 J.R. Heisey <jrheisey@sourceforge.com
	* config_win32.h.in, plat/win32/fd2raw.cpp: Removed strndup()
	for Visual Studio. Using g_strndup() from glib instead
	* src/os_dependent.cc, src/modules.h: Change parameter of
	free_error_message() from char * to const char * to go along with the change to
	get_error_message().
	* gpsim/gpsim.vcproj: Changed library from readline-static.lib to
	readline.lib in the debug build which is the correct debug library file.

2006-03-22 Scott Dattalo <scott@dattalo.com>
	* cli/input.cc, gui/gui_symbols.cc: use glib's g_strndup() instead
	of strndup.

2006-03-22 J.R. Heisey <jrheisey@sourceforge.com
	* config_win32.h.in, plat/win32/fd2raw.cpp: Created strndup()
	function for Visual Studio build.

2006-03-22 Scott Dattalo <scott@dattalo.com>
	* gui/gui_src_asm.cc:
	Last change cause segv in preferences editor.

2006-03-22 J.R. Heisey <jrheisey@sourceforge.com
	* /src/sim_context.cc: Modified forward declaration of
	get_error_message() to match recent definition change.

2006-03-22 Scott Dattalo <scott@dattalo.com>
	* src/cod.cc, src/pic-instructions.cc, src/processor.cc,
	src/processor.h:
	Fixed list file processing. Now the file context class knows if it
	owns a .lst file versus a .asm or .inc file.
	* gui/gui_src.h, gui/gui_src_asm.cc:
	List files are now displayed in the source browser. The program
	counter indicator tracks correctly. Breakpoints can not be
	controlled from within the list file view yet.
	Changed strndup calls to g_strndup. The form is a GNU extension
	while the latter is part of glib, but both do the same thing. This
	removes an OS dependency.

2006-03-21 Scott Dattalo <scott@dattalo.com>
	* gui/gui_object.cc: removed debug printf
	* gui/gui_src_asm.cc: Added a delete_event handler for the source
	browser; killing the source browser window was causing gpsim to
	crash otherwise.
	The source browser name has been updated to match the old
	browser's name (this is mainly for registry and .gpsim settings).
	Added GTK_WAIT's for slower machines. Apparently gtk's event queue
	is getting overwhelmed while the source browser is being created.

2006-03-21 Borut Razem <borut.razem@siol.net>
	* src/cod.cc: fixed bug "[ 1448454 ] usart_test - ERROR: == comparison
	  is not defined for String" by merging "assertions" and "assertions"
	  lists to a single "directive" list

2006-03-20 Scott Dattalo <scott@dattalo.com>
	* regression/breakpoints.asm: Embedded script error was causing
	regression test to fail.
	* regression/rt.sh: Minor fix to Borut's regression test
	enhancement; the 'tee' command was appending multiple regression
	tests to the same log file. Also, on Athlon 64's, the tee command
	was causing pipe errors for some reason.

2006-03-19 Scott Dattalo <scott@dattalo.com>
	* gui/gui_menu.cc, gui/gui_src.h, gui/gui_src_asm.cc:
	The preferences window now configures the source browser tabs,
	margins, and font.

2006-03-19 Borut Razem <borut.razem@siol.net>
	* plat/win32/gpsim.nsi: added share and lib\gtk-2.0\2.4.0\engines to
	  the package, use share\themes\MS-Windows\gtk-2.0\gtkrc as the
	  default gtkrc
	* gpsim/regression/rt.sh: failure detection

2006-03-15 Scott Dattalo <scott@dattalo.com>
	* gui/gui_src.h, gui/gui_src_asm.cc:
	Added .lst files to the source browser.
	Added the "ColorHolder" class to wrap a GdkColor that can be
	changed and reverted back to its original value.
	The colors for the source browser are now saved.
	Line numbers, addresses, and opcodes in the margin can be
	selectively enabled
	* gui/gui_menu.cc:
	Example code for src browser configuration is now rendered in a
	SourcePage.
	* gui/gui_statusbar.cc, gui/gui_main.cc, gui/gui.h,
	gui/gui_regwin.cc, gui/gui_break.cc, gui/gui_profile.cc: The
	global 'gp' has been renamed gpGuiProcessor.

2006-03-15 Alain Portal <aportal@univ-montp2.fr>
	* src/p12.h: Remove redundant class scoping (causes errors with
	gcc-4.1)

2006-03-14 Borut Razem <borut.razem@siol.net>
	* src/dspic/makefile.mingw: added
	* plat/win32/gpsim.nsi: fixed typo

2006-03-13 Scott Dattalo <scott@dattalo.com>
	* src/processor.cc: hex files were not getting loaded properly.

2006-03-12 Scott Dattalo <scott@dattalo.com>
	* src/pic-ioports.cc: PIC TRIS writes were not getting traced.

2006-03-12 Borut Razem <borut.razem@siol.net>
	* config_win32.h.in: added #define _USE_MATH_DEFINES, so that M_PI
	  is defined in MSVC math.h

2006-03-12 Scott Dattalo <scott@dattalo.com>
	* gui/gui_src.h, gui/gui_src_asm.cc, gui/gui_menu.cc:
	- Gui Preferences for source browser is *almost* working now. It's
	possible to modify colors, but the state of the colors are not
	being saved in the gpsim config file. Also, the line number,
	address, opcode configuration is not completed.
	- The Source browser now utilized the text_view margin for
	displaying addresses and opcodes. Also, breakpoints changes the
	margin field text to red. (This duplicated the diamond indicator,
	but I plan to use that for modifying complex breakpoints).

2006-03-12 Borut Razem <borut.razem@siol.net>
	* plat/win32/gpsim.nsi, doc/gpsimWin32.html, plat/win32/make.mingw,
	  cli/makefile.mingw, gpsim/makefile.mingw, gui/makefile.mingw,
	  modules/makefile.mingw: glib-2.8.6, gtk+-2.8.13, pango-1.10.2,
	  atk-1.10.3, cairo-1.0.2, ...

2006-03-09 Borut Razem <borut.razem@siol.net>
	* examples/modules/usart_gui/usart_gui.asm,
	  examples/modules/usart_gui/usart_gui.stc:
	  Renamed the usart RX and TX pins to RXPIN and TXPIN

2006-03-07 Scott Dattalo <scott@dattalo.com>
	* src/gui_src_asm.cc: Turned off debugging. Added a gtk event
	queue wait.
	* src/gui_processor.h: The default is to now enable the new source
	browser.

2006-03-06 Scott Dattalo <scott@dattalo.com>
	* src/stimuli.cc: The stimulus command without any options now
	shows more information. In particular, value stimuli (the ones
	that allow you to specify an array of data) are now shown.

2006-03-06 Scott Dattalo <scott@dattalo.com>
	* doc/gpsim.lyx, doc/gpsim.pdf: Updated the documentation to
	reflect the deprecation of the X command

2006-03-06 Scott Dattalo <scott@dattalo.com>
	* gui/gui_menu.cc, gui/gui_src.h, gui/gui_src_asm.cc: Moved the
	gtk text tag table to the source browser parent class. Added a
	SourceBuffer class to wrap the text buffers. With these changes,
	multiple source browsers will share the same text buffers.

2006-03-06 Scott Dattalo <scott@dattalo.com>
	* cli/cmd_x.cc: The x command has been deprecated.

2006-03-05 Scott Dattalo <scott@dattalo.com>
	* src/stimuli.h: The default Thevenin resistance for an IOPIN was
	too low. This caused an INPUT only pin to appear as though if it
	was driving! (Bug reported by Alex Holden).

2006-03-05 Borut Razem <borut.razem@siol.net>
	* configure.ac: removed GTK+ 1.x leftovers
	* plat/win32/gpsim.nsi: remove extras/graphic_lcd/* when uninstalling
	  gpsim, added extras/usart_con
	* extras/usart_con/AUTHORS, extras/usart_con/autogen.sh,
	  extras/usart_con/ChangeLog, extras/usart_con/configure.in,
	  extras/usart_con/COPYING, extras/usart_con/INSTALL,
	  extras/usart_con/Makefile.am, extras/usart_con/makefile.mingw,
	  extras/usart_con/module_manager.cc, extras/usart_con/NEWS,
	  extras/usart_con/README, extras/usart_con/usart_con.cc,
	  extras/usart_con/usart_con.h: receive-only usart module,
	  received characters are printed to the console

2006-03-04 Scott Dattalo <scott@dattalo.com>
	* gui/gui_menu.cc, gui/gui_src.h, gui/gui_src.cc: See comment on
	2006-02-27. Removed the line numbers from the source
	browser. Changed the current PC and breakpoint indicator. Also,
	now clicking on a break indicator toggles a break point.

2006-03-04 Scott Dattalo <scott@dattalo.com>
	* src/modules.h, src/modules.cc, src/os_dependent.cc: Changed
	references from char * to const char * for error strings
	processing. (Alex Holden reports that on BSD dlerror returns const
	char * where as on linux it returns plain char *).

2006-03-04 Scott Dattalo <scott@dattalo.com>
	* cli/ui_gpsim.cc: GlobalVerbosityAccessor verbose was declared
	twice! (Thanks to Alex Holden for pointing this out).

2006-02-27 Scott Dattalo <scott@dattalo.com>
	* src/processor.cc: FileContext put_address and get_address
	methods were ignoring the last line of files.
	* gui/gui_src.h: Rewrote the source browser using the gtk+-2.X
	API.
	*** NOTE *** The older version of the source browser is still
	present and enabled by default. To enable the new browser,
	'NEW_SOURCE_BROWSER' needs to be defined. (This can either be
	accomplished by ./configure or by editing gui/gui_processor.h
	* gui/gui.h, gui/gui_processor.h: Added new source window class to
	list of gui classes.
	* gui/gui_menu.cc: ifdef'd removed the source browser preference
	configuration (for now)
	* gui/gui_object.cc, gui/gui_object.h: set_name() now requires const
	char * instead of just char *.

2006-02-25 Borut Razem <borut.razem@siol.net>
	* src/p18x.cc: EEPROM sfr registers were not mapped on 16 bit pics

2006-02-20 Borut Razem <borut.razem@siol.net>
	* src/os_dependent.cc: reverted changes I made 2006-02-19,
	  since the GPSIMPATH functionality was already implemented

2006-02-20 Scott Dattalo <scott@dattalo.com>
	* src/symbol.cc: Symbol_Table::clear() crashes when the simulation
	engine is used as a stand alone library (Reported by David Saxtion).

2006-02-19 Borut Razem <borut.razem@siol.net>
	* regression/switch_test/switch_test.stc,
	  examples/modules/usart_gui/usart_gui.stc: removed .so extension
	  from "module library libgpsim_modules.so" so that it runs on WIN32
	  platform
	* src/modules.cc: made ModuleLibrary::MakeCanonicalName() a dummy
	  method on WIN32 platform. Is it really needed on *nix?
	* src/os_dependent.cc: introduced GPSIM_MODULE_PATH environment
	  variable on WIN32 platform  to define additional directories where
	  modules are searched. The search order for WIN32 is as follows:
	    1. The directory specified by library_name.
	    2. The current directory.
	    3. The system directory.
	    4. The 16-bit system directory.
	    5. The Windows directory.
	    6. The directory from which the application loaded
	      followed by directories listed in GPSIM_MODULE_PATH environment
	      variable followed by directories listed in PATH environment
	      variable.

2006-02-17 Scott Dattalo <scott@dattalo.com>
	* src/16bit-instructions.cc, src/16bit-instructions.h,
	src/16bit-hexdecode.cc: Fixed a few bugs with the newly added
	extended instructions.
	* src/16bit-processors.cc, src/16bit-processors.cc,
	src/16bit-registers.cc:
	added the pclatu register.
	* src/pic-instructions.cc: the instruction class constructor now
	initializes most of it's data members directly.

	* regression/make.regression: .cod files are now removed for the
	'make clean rule'
	* regression/run_regression.sh,
	regression/p18f/18f452.lkr, p18f/Makefile,
	p18f/extended_instructions.asm, p18f/instructions.asm,
	p18f/startup.stc:
	Regression test for the 18f extended instructions.

2006-02-16 Borut Razem <borut.razem@siol.net>
	* plat/win32/libgpsim.def: MSVC sync

2006-02-14 Scott Dattalo <scott@dattalo.com>
	* src/16bit-instructions.cc, src/16bit-instructions.h,
	src/16bit-hexdecode.cc: Added support for the extended
	instructions ADDFSR, ADDULNK, CALLW, MOVSF, MOVSS, SUBFSR, and
	SUBULNK, in the 18fxxxx family.

2006-02-13 Scott Dattalo <scott@dattalo.com>
	* src/gui/gui_menu.cc: more source browser experiments.

2006-02-08 Scott Dattalo <scott@dattalo.com>
	* modules/usart.cc:
	Renamed the usart RX and TX pins to RXPIN and TXPIN. The old names
	conflict with the names of constants. (This is a problem with
	absolute mode code.)
	Updated the gui to use gtk_text_view instead of the obsolete
	gtk_text. (note this change really needs to be made for all of
	gpsim's gui!)

2006-02-08 Scott Dattalo <scott@dattalo.com>
	* src/dspic/dspic-instructions.cc, src/dspic/dspic-instructions.h:
	Support for some versions of the MOV instruction.

2006-02-05 Scott Dattalo <scott@dattalo.com>
	* src/dspic/dspic-instructions.cc, src/dspic/dspic-instructions.h,
	src/dspic/dspic-processors.cc, src/dspic/dspic-processors.h,
	src/dspic/dspic-registers.cc, src/dspic/dspic-registers.h:
	Unified the Literal and Register Direct addressing modes.
	Added support for the Status register.
	Program counter tracing is now supported.

2006-02-04 Scott Dattalo <scott@dattalo.com>
	* src/dspic/dspic-instructions.cc, src/dspic/dspic-instructions.h,
	src/dspic/dspic-processors.cc:
	Added support for the Literal, Register Direct,  and Register
	Indirect addressing modes.

2006-02-03 Roy Rankin <rrankin@ihug.com.au>
	* src/processor.cc, src/pic-processor:
	The pic-processor class was over-writing the
	cycles_per_instruction value in the processor class
	* modules/switch.cc, modules/switch.h, modules/resistor.cc,
	regression/switch_test/switch_test.stc,
	regression/switch_test/switch_test.asm:
	Switch modules now handle analog inputs and RC loads.

2006-01-30 J.R. Heisey <jrheisey@sourceforge.com
	* Changed the implementation of Float::copy() to use the get()
	function to retrieve the value.

2006-01-30 Scott Dattalo <scott@dattalo.com>
	* src/processor.cc, src/processor.h: added methods for mapping
	register addresses into register indexes (for the dspic) and use
	this to create invalid registers.
	* src/registers.cc: contructors now propagate calls to parents
	* gui/gui_regwin.cc: a non-existent register at address 0 was
	crashing the register window
	* src/dspic/dspic-instructions.cc, src/dspic/dspic-instructions.h,
	src/dspic/dspic-processors.cc, src/dspic/dspic-processors.h,
	src/dspic/dspic-registers.cc, src/dspic/dspic-registers.h:
	dspic port:
	  -- added register memory
	  -- added W0-W15
	  -- invalid registers populate register space
	  -- added Program Counter
	  -- single stepping works.
	  -- GOTO, RCALL and BRA instructions are now supported.

2006-01-25 Roy Rankin <rrankin@ihug.com.au>
	* gui/gui_profile.cc: fix core dump

2006-01-29 J.R. Heisey <jrheisey@sourceforge.com
	* cli/cmd_break.cc: I prevent ei from being incremented for
	pThird if pSecond does not exist. This was causing a crash
	in Windows because pThird ended up point to the same object
	as pFirst. (go figure) Later pThird was getting deleted then
	pFirst (the same object) was getting referenced causing the
	crash.
	(i.e. break e MYLABEL where MYLABEL is not defined.) I also
	added a check to bpn == -1 and write an error. This provides
	an error message if a code symbol is not defined.

2006-01-28 Borut Razem <borut.razem@siol.net>
	* makefile.mingw, src/makefile.mingw, gpsim/makefile.mingw,
	  plat/win32/make.mingw: added dspic to MINGW

2006-01-27 Scott Dattalo <scott@dattalo.com>
	* src/dspic/dspic-registers.cc, src/dspic/dspic-registers.cc:
	added to CVS - initial support of dspic family registers
	* src/dspic/Makefile.am: dspic-registers added
	* src/dspic/dspic-instructions.cc, src/dspic/dspic-instructions.h:
	stubbed out the entire dspic instruction set.
	* src/dspic/dspic-processors.cc, src/dspic/dspic-processors.h:
	added initialization code to allow the dspic to be instantiated.
	* src/hexutils.cc: fixed two buglets introduced in earlier checkin
	* src/pic-instructions.cc: the invalid_instruction constructor now
	calls the Instruction constructor.
	* src/processor.cc: The disassemble method can now accommodate the
	dspic's 24-bit opcodes.

2006-01-27 Scott Dattalo <scott@dattalo.com>
	* configure.ac: changed version from 0.21.11 to 0.21.12-pre
	* cli/scan.ll: conditionally use YY_* macros.

2006-01-27 Scott Dattalo <scott@dattalo.com>
	* Makefile.am, configure.ac, src/Makefile.am: update makefiles for
	dspic support.
	* src/dspic/Makefile.am, src/dspic/dspic-instructions.cc,
	src/dspic/dspic-instructions.h, src/dspic/gpsim_modules.cc,
	src/dspic/dspic-processors.cc, src/dspic/dspic-processors.h:
	Initial infrastructure for dspic port.
	* src/hexutils.h: New file.
	* src/hexutils.cc, src/program_files.cc: Hex files generated by
	gpasm and mpasm are really Intel hex files. The hex files
	generated by the gcc-pic30 tool chain also generate Intel hex
	files. Now gpsim supports more of the features of the Intel hex
	file format.
	* src/pic-processor.cc, src/pic-processor.h, src/processor.cc,
	src/processor.h: minor changes to deal with Hexfiles.
	* src/p16x6x.cc: TMR1L and TMR1H were named as just tmrl and tmrh

2006-01-21 Borut Razem <borut.razem@siol.net>
	* src/stimuli.cc: fixed bug exposed by resistor regression test,
	  see the comment "; the following test for a core dump bug" in
	  regression/resistor/resistor.asm
	* cli/cmd_module.cc: added missing paramterer to DisplayMessage() call

2006-01-20 Borut Razem <borut.razem@siol.net>
	* plat/win32/libgpsim.def: MSVC sync
	* src/gpsim_object.h: removed empty destructor from class BreakType
	  in order to avoid gcc warning: `class BreakType' has virtual
	  functions but non-virtual destructor
	* src/breakpoints.cc: changed // comments to /**/ in order to avoid
	  gcc warning: multi-line comment
	* src/cod.cc: removed gcc warning: unused variable 'pCli'
	* src/os_dependent.cc: removed gcc warning: 'bAltPaths' defined but not
	  used
	* program_files.cc: removed gcc warning: 'iReturn' might be used
	  uninitialized in this function
	* src/stimuli.cc: removed gcc warning: 'pPinSymbol' might be used
	  uninitialized in this function and warning: 'pMod' might be used
	  uninitialized in this function
	* value.cc: removed gcc warning: statement has no effect
	* src/ValueCollection.cc: removed gcc warning: unused variable
	  'uUpperBound'
	* src/lxt_write.c: removed gcc warning: 'lt_emit_u64' defined but not
	  used
	* src/modules.cc: removed gcc warning: extra tokens at end of #endif
	  directive
	* plat/win32/icd.c: removed gcc warning: 'use_icd' defined but not used
	* gui/gui_breadbord.cc: removed warning: 'orientation' might be used
	  uninitialized in this function
	  warning: 'pin_x' might be used uninitialized in this function
	  warning: 'pin_y' might be used uninitialized in this function
	  warning: 'label_x' might be used uninitialized in this function
	  warning: 'label_y' might be used uninitialized in this function
	* gui/gui_menu.cc: removed gcc warning: unused variable 'start'
	  warning: unused variable 'end'
	  warning: unused variable 'color'
	  warning: unused variable 'tag'
	  warning: unused variable 'cParray'
	* gui/gui_src_asm.cc: removed gcc warning: unused variable 'dragbreak'
	  warning: unused variable 'dragstartline'
	  warning: unused variable 'dragwidget_oldy'
	  warning: unused variable 'dragwidget'
	  warning: unused variable 'dragwidget_x'
	  warning: 'gint drag_scroll_cb(void*)' defined but not used
	  warning: 'void text_insert(SourceBrowserAsm_Window*, int, GtkStyle*,
	  char*, int)' defined but not used
	* gui/gui_watch.cc: warning: unused variable 'uBitmaskForMaskedValue'

2006-01-20 Scott Dattalo <scott@dattalo.com>
	* src/trigger.cc, src/breakpoints.cc: Breakpoint messages were not
	getting printed when execution breakpoints were hit.

2006-01-19 Scott Dattalo <scott@dattalo.com>
	* cli/parse.yy, cli/cmd_break.cc, cli/cmd_break.h, src/breakpoints.cc
	Rewrote breakpoint parsing. gpsim recently introduced an
	expression option for breakpoints. As this feature was refined, it
	turned out that the best way to handle expressions was with a two
	level approach. At the high level, there is a 'break condition',
	e.g. 'break w MyVariable'. The condition in this case is to break
	if the variable 'MyVariable' is written to. At the next level,
	there is a qualifying expression. For example:
	   break w MyVariable, ((PC > IntVector) && (PC<IntVectorEnd))
	In other words, this break occurs if the interrupt routine is
	executing when ever 'MyVariable' is written to.
	 One of the refinements was to turn the 'break condition' into an
	expression. Eg. 'break w ((MyVar &0xf)==4)'. Here, the condition
	is an expression. This condition can have an additional qualifying
	expression.
	     *** Command Line Syntax Change ***
	The old syntax is:
	    break type condition [expression] [,"message"]
	The new syntax is:
	    break type condition [,expression] [,"message"]

	The difference is that the new syntax requires a comma between the
	condition and the qualifying expression.

	* cli/input.cc: embedded scripts were not executing in proper
	order.

	* regression/breakpoints/breakpoints.asm,
	regression/digital_stim/digital_stim.asm,
	regression/instructions_12bit/instructions_12bit.asm,
	regression/instructions_14bit/instructions_14bit.asm,
	regression/instructions_16bit/instructions_16bit.asm,
	regression/interrupts_14bit/interrupts_14bit.asm,
	regression/logic_test/logic_test.asm,
	regression/macro_test/macro_test.asm,
	regression/node_test/node_test.asm,
	regression/p12ce518/p12ce518.asm, regression/p16f84/p16f84.asm,
	regression/p18f452_ports/p18f452_ports.asm,
	regression/register_stim/register_stim.asm,
	regression/resistor/resistor.asm,
	regression/switch_test/switch_test.asm,
	regression/tmr0_16bit/tmr0_16bit.asm,
	regression/usart_test/usart_test.asm:
	Updated regression tests with the new breakpoint syntax.

	* src/cod.cc: Insert commas between breakpoint expressions.

	* src/operator.cc, src/operator.h: Comparison expressions now
	support breakpoints

	* eXdbm/misc.c: Deleting a non-existent item from the data base
	was causing a crash.

2006-01-12 Scott Dattalo <scott@dattalo.com>
	* src/errors.h, src/sim_context.cc: Slight clean up to Roy's
	patch.

2006-01-12 Roy Rankin <rrankin@ihug.com.au>
	* src/modules.cc: remove library load failure exception throw. In
	Linux, a failed module library load command from the command
	window repeats the error message already printed.  Even worse, if
	the failure occurs fromthe breadboard GUI "Add libs" function,
	gpsim crashes.

	* src/os_dependent.cc: Fix up error handling on library loads for
	Linux. Also for readability changed #ifndef _WIN32 to #ifdef
	_WIN32 reversing the cases.


2006-01-10 J.R. Heisey <jrheisey@users.sourceforge.com
	* gui\gui_watch.cc gui\gui_watch.h, gui\gui.h, gui\gui_object.cc,
	gui\settings.h, gui\settings_exdbm.cc, gui\settings_exdbm.h,
	plat\win32\settings_reg.cpp, plat\win32\settings_reg.h:
	Fixed bug where loading a hex file a second time in the same
	gpsim sesssion caused the watch window to be populated with
	multiple instances of the same previously entered symbols.
	Created a config_remove() function to remove entries from
	the Settings database.
	* src\sim_context.cc, src\sim_context.h, src\symbol.cc,
	cli\input.cc: Changed catch_control_c() function to call
	CSimulationContext::NotifyUserCanceled() rather than
	Breakpoints:halt(). NotifyUserCanceled() now calls halt() and other
	processing depending the context.
	Added code to allow a user to abort the symbol listing to the
	console by pressing CTRL-C.
	* gui\gui_regwin.cc: Fixed some crashing bugs that occured when
	you click on a watch window row when the register window has
	not been built.

2006-01-06 Roy Rankin <rrankin@ihug.com.au>
	* modules/led.cc, modules/led.h: Added dynamic gui update to the
	led modules.

2006-01-07 Scott Dattalo <scott@dattalo.com>
	* regression/resistor/resistor.asm: Tiny comment change
	* regression/run_regression.ch: Added the resistor regression test
	to the test suite.

2006-01-07 Roy Rankin <rrankin@ihug.com.au>
	* modules/resistor.cc: Pulldown resistor voltage is now set to 0
	Volts.
	* src/stimulus.h, src/stimuli.cc: Adjusted default resistance
	values for stimuli to more closely match PIC I/O pins.
	* regression/resistor/resistor.asm: Set pulldown resistance for
	the pulldown resistor.

2006-01-06 Roy Rankin <rrankin@ihug.com.au>
	* src/stimuli.cc: Fixed crash regarding module pin names.
	* regression/resistor/Makefile: New regression test for the
	resistor module.
	* regression/resistor/resistor.asm:
	* regression/resistor/resistor.stc:
	* regression/resistor/16f873.lkr:


2006-01-02 Scott Dattalo <scott@dattalo.com>
	* src/ui.h, src/ui.cc: added another method for formatting
	registers (though this might be removed later).
	* src/value.h, src/value.cc: Moved Value specific breakpoint
	functionality to the Value class. Fixed typo in an error message.
	* src/symbol.cc, src/symbol.h: Fixed a bug with clearing the symbol table.
	 - Added breakpoint expression compilation to the register_symbol
	 class (this was previously being handled in cli/cmd_break.cc).
	 - The w_symbol now is printed out as a W register.
	* src/module.h, src/processor.h: moved the register_size and
	register_mask methods from the processor class to the module
	class. (Modules can have regsiters too!).
	* src/p16x7x.cc, src/p16x6x.cc, src/p16x5x.cc, src/p16f87x.cc,
	src/p16f62x.cc, src/16bit-processors.cc, src/14bit-processors.cc:
	W was not getting added to the symbol table.
	* src/gpsim_time.cc: stopwatch changes to conform to value class api.
	* src/breakpoints.cc, src/breakpoints.h: cleaned up/fixed printout of
	register breakpoints. Added a more generic 'set_break()' method
	that replaces several other specific methods (the old ones haven't
	been removed yet).
	* cli/parse.yy: certain read and write break points were not
	getting parsed properly.
	* cli/scan.ll: echo command was failing to be recognized.
	* cli/cmd_break.cc: moved most of the expression parsing into the
	simulation engine.
	* src/expr.h, src/expr.cc: LiteralSymbols are cast into either
	registers or program memory address when breaks are set on them.
	* src/cod.cc: pruned some dead code.
	* src/tmr0.cc, src/tmr0.h: TMR0 class now conforms to new break API.

2006-01-02 Scott Dattalo <scott@dattalo.com>
	* configure.ac, cli/input.cc, cli/socket.cc: add configuration
	option to inhibit the socket interface.

2005-12-31 Borut Razem <borut.razem@siol.net>
	* plat/win32/gpsim.nsi: added examples/modules/usart_gui/*.* and
	  extras/graphic_lcd/*.* to the WIN32 setup

2005-12-30 Scott Dattalo <scott@dattalo.com>
	* src/value.cc, src/value.h: Clarified error message when user
	attempts to set or clear breakpoints on register symboles. Also,
	fixed error message on Integer casts to Booleans.
	* src/bitlog.h, src/bitlog.cc: Added dump() and dump_ASCII_art()
	methods to the ThreeStateEventLogger class. These are debug
	functions used to examine event logs.
	* modules/usart.cc: Utilize new event logger utilities.


2005-12-28 Scott Dattalo <scott@dattalo.com>
	* regression/breakpoints, regression/breakpoints/breakpoints.asm,
	regression/breakpoints/Makefile,
	regression/breakpoints/16f873.lkr,
	regression/breakpoints/breakpoints.stc: Added a regression test
	for testing breakpoints. (Not much there yet)

2005-12-28 Scott Dattalo <scott@dattalo.com>
	* cli/cmd_break.cc, src/breakpoints.cc: gpsim would crash if a
	break point was set on a register that did not have a symbol table
	entry.

2005-12-28 Roy Rankin <rrankin@ihug.com.au>
	* modules/usart.cc, modules/usart.h: Fixed bugs in
	mSendByte. Fixed usart attributes. Cleaned up error messages.
	* modules/usart.cc, modules/usart.h: Added a gui interface to the
	usart module.
	* examples/modules/usart_gui/Makefile: New
	* examples/modules/usart_gui/README: New
	* examples/modules/usart_gui/usart_gui.asm: New
	* examples/modules/usart_gui/usart_gui.stc: New. The usart_gui
	example illustrates the new Usart GUI interface.

2005-12-23 J.R. Heisey <jrheisey@sourceforge.com
	* src/breakpoints.cc, src/cmd_gpsim.h, cli/cmd_module.cc,
	cli/cmd_processor.cc, gpsim/gpsim.vcproj, gui/gui_breadboard.cc,
	src/interface.cc, plat/win32/libgpsim.def, src/Makefile.am,
	src/makefile.mingw, src/modules.cc, src/modules.h,
	src/processor.cc, src/processor.h, src/sim_context.cc,
	src/sim_context.h, src/src.vcproj, src/symbol.cc, src/symbol.h,
	cli/ui_gpsim.cc, src/ui.cc, src/ui.h: Refactored the functions
	in module.cxx into a ModuleLibary class that contains various
	lists in preparation for a gpsim Perl API. Also fixed the
	gui_breadboard iteration of modules. Now they display
	properly.

2005-12-23 Scott Dattalo <scott@dattalo.com>
	* src/symbol.cc: findRegisterSymbol dumped core if a register was
	being loaded from a module (and not from a processor)
	* src/os_dependent.cc, src/processor.cc: Relative paths were
	getting concatenated to absolute paths
	* src/16bit-processors.cc: ccp1 is now associated with portc2

2005-12-19 Scott Dattalo <scott@dattalo.com>
	* src/icd.cc, src/modules.cc, src/pic-processor.cc,
	src/sim_context.cc, modules/paraface.cc: Re-added needed unistd.h
	includes that were removed on 2005-12-10. New systems may not
	unistd, but older ones do.

2005-12-17 Scott Dattalo <scott@dattalo.com>
	* cli/input.cc: removed glib dependencies for non-gui builds

2005-12-16 Scott Dattalo <scott@dattalo.com>
	* src/ioports.h, src/ioports.cc, src/pic-ioports.h,
	src/pic-ioports.cc: moved some of the functionality in the
	PicPort classes upto the generic Port classes. Also added
	comments.

2005-12-12 J.R. Heisey <jrheisey@sourceforge.com
	* cli\cmd_symbol.cc, cli\cmd_symbol.h, src\operator.cc,
	cli\parse.yy: I've reconsidered regarding implementing
	and indirection operator. The ampersand character may
	now be used to reference a integer value or a register
	symbol as an indirection operator. I've also made
	it possible to type only an expression enclosed in parens.
	The expression will evaluate and be printed on the next
	console.

2005-12-11 J.R. Heisey <jrheisey@sourceforge.com
	* src\expr.cc, src\expr.h, src\operator.cc, src\operator.h,
	cli\parse.yy, cli\scan.ll, src\symbol.cc, src\symbol.h,
	src\value.cc src\value.h: Problems with expression evaluation.
	Could not evaluate A=-X. Added evaluate() function to class
	Value and a pecialized implementations to relevant derived
	classes. The LiteralSymbol::evaluate() now calls the symbols
	evaluate() so that a register_symbol will return the register
	contents.
	* Also implemented reg(int) as an expression so it can be
	included in calculations
	* Implemented the ampersand character as an 'address of' operator
	Fixed minus sign for negation and one's complement.
	* src/gpsim_object.cc: gpsimObject:showType() now does not
	include the word class for the type for Windows.

2005-12-11 Borut Razem <borut.razem@siol.net>

	* src/16bit-instructions.h, src/breakpoints.h, src/pic-instructions.h,
	  src/pic-instructions.cc, src/processor.h, src/processor.cc:
	  fixed gcc errors: processor.h:150: error: using typedef-name
	  `instruction::INSTRUCTION_TYPES' after `enum'

2005-12-10 J.R. Heisey <jrheisey@sourceforge.com>src/registers.h:
	* src/expr.cc, src/ValueCollections.cc, src/ValueCollections.h:
	Added toString(ExprList_t*) and move some code from
	IndexedSymbol::toString() into it.
	* src/modules.cc, src/modules.h: Added functions for deleting
	module libraries.
	* 14bit-processors.cc, src/14bit-processors.h, src/p12x.h,
	src/16bit-processors.h, src/p16f62x.cc, src/p16x5x.cc,
	src/p16x5x.h, src/p16x6x.cc,src/p16x7x.cc, src/p16x8x.cc,
	src/p18x.cc, src/p18x.h, src/Makefile.am, src/makefile.mingw,
	src/src.vcproj, src/ioports.cc, src/ioports.h, src/pic-ioports.cc,
	src/pic-ioports.h: Moved PicPortBRegister, PicTrisRegister and
	PicPortRegister definitions into these files from ioports.cc
	and ioports.h. Added pic-ioports.cc,h to build files. This was
	motivated by moving undesirable code for the SWIG script
	language builds.
	* src/value.cc, src/value.h: Renamed New() to NewObject() to
	avoid conflict with SWIG.
	* src/breakpoints.h, src/interface.h, src/os_dependent.cc,
	src/pic-instructions.h, src/pic-processor.cc, src/pic-processor.h,
	src/processor.cc, src/processor.h, src/stimuli.h, src/trace.h:
	removed unneeded reference to the header unistd.h.

2005-12-06 Scott Dattalo <scott@dattalo.com>

	* src/ioports.h, src/ioports.cc: Cleaned up the IOPORT class and
	deprecated some old functions.
	* src/stimuli.cc: use new IOPORT class functions.
	* modules/encoder.cc, modules/logic.h, modules/paraface.cc,
	modules/push_button.cc: Updated to new I/O port class api.
	* gui/gui_src_asm.cc: Removed printf debug

2005-12-05 Scott Dattalo <scott@dattalo.com>

	* gui/gui_src_asm.cc: Source browser crashed if there was no
	instruction at the current PC.

	* regression/instructions_16bit/18f452.lkr: mchip stock linker
	script has a bug with hard coded interrupt routine size.

2005-12-04 Robert Pearce <rob@bdt-home.demon.co.uk>

	* src/p12.cc, src/p12.h: Added pullups to 12bit-core I/O pins

2005-12-03 Robert Pearce <rob@bdt-home.demon.co.uk>

	* src/p12.cc, src/p12.h, src/pic-processors.cc,
	src/pic-processors.h: Added the 10F202.

2005-12-02 Scott Dattalo <scott@dattalo.com>
	* eeprom.cc, eeprom.h, i2c-ee.cc, i2c-ee.h, registers.cc,
	registers.h, processors.cc:
	Extended the RegisterCollection class to support an arbitrary
	array of Registers. Added CLI access to the EEPROM.
	Usage:
	   eeData
	shows all eeprom registers.
	   eeData[expression]
	shows one or several eeprom registers.
	* packages.cc, packages.h: Added better support for module pin
	placement.
	* gui/gui.h, gui/gui_breadboard.cc, gui/gui_breadboard.h,
	gui/gui_main.cc: Cleaned up package creation in preparation for
	a graphic LCD module.


2005-11-27 Borut Razem <borut.razem@siol.net>
	* plat/win32/gpsim.nsi, plat/win32/make.mingw, cli/makefile.mingw,
	  gpsim/makefile.mingw, gui/makefile.mingw, modules/makefile.mingw,
	  src/makefile.mingw, regression/README: MINGW sync

2005-11-22 J.R. Heisey <jrheisey@sourceforge.com>
	* cli\cmd_log.cc gui\gui_regwin.cc src\init.cc src\pic-processor.cc,
	src\trace.cc src\trace.h: Changed references of trace_log to
	GetTraceLog() to decouple the global trace_log in the libgpsim.so/dll
	from the executable. Please do the same with any other globals
	you find and that I missed.

	src\expr.cc: Implemented dumping a range of an indexed variable
	using the integer range operator. (i.e. ramData[3:20]

2005-11-21 J.R. Heisey <jrheisey@sourceforge.com>
	* src\symbol.cc src\symbol.h src\ValueCollections.cc
	src\ValueCollections.h: Fixed couple bugs and added additional
	support for ndexable variables.
	* src\value.cc src\value.h: Fixed bitmask issue with the copy
	constructor of Integer. Added assignment operator to Integer
	from const Integer&.
	* src\ValueCollections.cc src\ValueCollections.h again:
	Implemented the omitted ability to do array=value and
	array[range]=value.

2005-11-21 J.R. Heisey <jrheisey@sourceforge.com>
	* src\12bit-processors.cc, src\breakpoints.h, cli\cmd_break.cc,
	cli\cmd_clear.cc, src\cmd_gpsim.h, cli\cmd_log.cc, cli\cmd_run.cc,
	cli\cmd_set.cc, gpsim\CopyDlls.bat, src\exports.h, src\fopen-path.h,
	plat\win32\gpsim.def, plat\win32\libgpsim.def, src\gpsim_interface.h,
	src\gpsim_time.cc src\gpsim_time.h gui\gui_menu.cc gui\gui_regwin.cc,
	gui\gui_src_asm.cc gui\gui_trace.cc gui\gui_watch.cc src\hexutils.cc,
	src\i2c-ee.cc src\icd.cc plat\win32\icd.cc src\icd.h cli\input.cc,
	src\interface.cc, src\interface.h, gpsim\main.cc, cli\misc.h,
	src\os_dependent.cc, src\pic-processor.cc, src\pic-processor.h,
	src\processor.h, src\program_files.cc, cli\scan.ll, src\sim_context.cc,
	cli\socket.cc, src\stimuli.cc, src\symbol.h, src\trace.h,
	src\ttoken.cc, src\ttoken.h, cli\ui_gpsim.cc, cli\cli.vcproj,
	gui\gui.vcproj, src\src.vcproj, gpsim\gpsim.vcproj:
	These changes are for building the files in the src folder
	as the library libgpsim.dll under Windows. There were a couple
	of global variables that needed to be decoupled with accessor
	functions for access from gpsim.exe and other modules.
	I found that putting global variables in the gpsim.def file
	didn't work. The globals needing accessor functions were realtime_mode,
	reatime_mode_with_gui, verbose, and use_icd.
	I also needed to create the NullConsole and NullUserInterface class
	in src. These provide IConsole and IUserInterface objects
	with no implementation. Now cli in gpsim.exe creates it own
	implementation and passes it to the function SetUserInterface().
	Any other application that links to libgpsim.dll and expects test
	messages will need to pass there own IConsole and IUserInterface
	implementations. At some point I hope I (or someone) will clean
	up all of the cout references and use the GetUserInterface() function.
	Renamed macros in exports.h from GPSIM_DLL_EXPORT, GPSIM_EXT_CLASS,
	and GPSIM_EXPORT to added the LIB prefix reflecting the new
	library file.
	Created a new file libgpsim.def and moved all the symbols from
	gpsim.def into it. Emptied gpsim.def of all symbols.
	References to bp now call get_bp().
	References to ui now call

2005-11-13 Scott Dattalo <scott@dattalo.com>
	* gui/gui_menu.cc: The experimental Preferences window caused a
	crash if it was opened, but the source browser was not opened.

2005-11-13 Borut Razem <borut.razem@siol.net>

	* plat/win32/gpsim.def: MSVC sync
	* modules/switch.cc: added #include <assert.h>

2005-11-12 Scott Dattalo <scott@dattalo.com>

	* cli/input.cc, cli/scan.ll: Under certain conditions, command
	assertions were causing the lexer to get confused.
	* gui/gui_menu.cc: experiment code with preferences.
	* src/ioports.cc, modules/encoder.cc, modules/paraface.cc,
	modules/push_button.cc: Calls to Stimulus_Node->update() method
	unnecessarily passed the current simulation time.
	* modules/resistor.cc, modules/resistor.h: The pullup resistor
	module was completely broken.
	* modules/switch.cc, modules/switch.h: The switch module never did
	work, but now it does! This is now truly a two-port device.
	* src/gpsim_time.cc, src/gpsim_time.h: Added methods to control
	the real time to simulated time mapping.
	* src/breakpoints.cc: Command Assertions were unnecessarily adding
	an extra '\n' to the end of the command string.
	* src/stimuli.cc, src/stimuli.h: Originally node updates would
	update the node state and refresh connected stimuli all within the
	context of a single method. Now this has been split into two
	methods. This was added to support the switch module. In addition,
	the new method 'getThevenin()' retrieves the full electrical state
	of a stimulus.

2005-11-09 Robert Pearce <rob@bdt-home.demon.co.uk>

	* src/pic-processor.cc, src/processor.cc: Update simulation time
	base when ever the processor's oscillator frequency is changed.

2005-11-08 Borut Razem <borut.razem@siol.net>

	* makefile.mingw: MINGW sync

2005-11-06 J.R. Heisey <jrheisey@sourceforge.com>
	* src/cmd_gpsim.h: Ability to format a value using a bit mask.
	* cli/cmd_symbol.h: Routines to dump and set an indexed
	value.
	* cli/cmd_x.cc cli/cmd_x.h: Lets use set reg(2)=expr.
	* src/processor.h: Implemented new function Processor::
	ConstructInvalidInstruction() function to allow derived classes
	to define there own Invalid instruction types.
	* src/expr.cc src/expr.h, src/ValueCollections.cc,h, src/symbol.cc
	src/symbol.h: Implemented classes to expose to the command prompt
	interface an indexed variable symbol type commonly refered to as
	arrays.
	* cli/scan.ll, cli/parse.yy: Implemented the parsing of indexed
	(array) variables in the command language.
	RAM, EEPROM and ROM are the first ones.
	(i.e. RAM[$20])
	* cli/scan.ll: Implemented strings as single quotes as well as
	double quotes.
	* Fixed issue where setting a RAM value from the command
	prompt would not update the GUI windows.
	* cli/parse.yy: Allow setting a RAM using the reg() operator.
	(i.e. reg(3)=54)
	* src/value.cc src/value.h: Added extra operators for Integer and
	Float. Also added a bitmask for Integer to be used for display
	purposes.
	* src/registers.cc,h: Implemented RegisterCollection class.
	* src/sim_context.cc: In CSimulationContext::Clear() now clear
	the symbol table after I delete the processors in the processor
	list. This provents the symbol table from deleting a symbol
	that is actually owned by the processor.

2005-11-02 Robert Pearce <rob@bdt-home.demon.co.uk>
	* src/tmr0.cc, src/stimuli.cc: Fix TMR0 external clocking
	ploarity. Fixed a typo in IOPIN::getBitChar().

2005-10-24 Scott Dattalo <scott@dattalo.com>
	* src/gpsim_time.cc, src/gpsim_time.h: Fixed a nasty cycle counter
	bug that would erroneously clear a break point whenever two breaks
	were set at the same cycle.
	* src/interface.cc: Interface callback breakpoint now can display
	a message in the breakpoint list.
	* src/p16x6x.cc, src/p18x.cc, src/pir.cc, src/pir.h,
	src/14bit-tmrs.cc, src/14bit-tmrs.h, src/16bit-processors.cc: The
	whole "pir_set" design needs to be re-implemented. At issue is
	that every pic potentially has a different bit mapping for the PIR
	registers. The pir_set desgin attempts to accommodate this with
	pure VF's. Unfortunately, peripherals like the TMRL class that
	need to set PIR bits only can call specific methods like
	"set_tmr1f()". However, the TMRL class is used as a base for TMR3
	too! I created a new class called "InterruptSource" that can
	trigger interrupts instead.

2005-10-21 Borut Razem <borut.razem@siol.net>
	* makefile.mingw, plat/win32/makefile.mingw, plat/win32/make.mingw,
	  plat/win32/gpsim.nsi: building gpsim setup executable on WIN32

2005-10-20 Scott Dattalo <scott@dattalo.com>
	* regression/make.regression: modified the default make target
	to create a .cod file
	* regression/tmr0_16bit/Makefile,
	regression/tmr0_16bit/tmr0_16bit.asm: Added tests for 16bit mode
	of tmr0.
	* regression/tmr0_16bit/delay.inc,
	regression/tmr0_16bit/delay.asm: Added to CVS. Made the delay routine a separate
	source module. Also, a DELAY macro has been created so that
	exactly N cycles can be delayed, where  0 < N < 65536+15.
	* src/16bit-processors.cc: portd and porte registers were not
	getting added to the symbol table.

2005-10-14 Scott Dattalo <scott@dattalo.com>
	* regression/tmr0_16bit/tmr0_16bit.asm: Interrupt test assertions.

2005-10-13 Borut Razem <borut.razem@siol.net>
	* makefile.mingw, doc/makefile.mingw: building gpsim documentation on WIN32

2005-10-13 Scott Dattalo <scott@dattalo.com>
	* gpsim/main.cc, cli/cmd_load.cc, cli/cmd_macro.cc, cli/input.cc,
	cli/socket.cc: command assertions were not getting processed immediately.
	* regression/tmr0_16bit/tmr0_16bit.asm: Started interrupt test.

2005-10-12 Borut Razem <borut.razem@siol.net>
	* regression/make.regression, regression/run_regression.sh,
	  regression/*/Makefile: added possibility to define gpism path

2005-10-12 Scott Dattalo <scott@dattalo.com>
	* src/16bit-registers.cc, regression/tmr0_16bit/tmr0_16bit.asm:
	The high byte of TMR0 was not getting updated during TMR0L reads.

2005-10-11 Scott Dattalo <scott@dattalo.com>
	* src/pic-instructions.cc, src/pic-instructions.h: Added methods
	to the instruction class that provide acces to the source defining
	an instruction (this is going to be used with tracing and
	disassembly soon).

2005-10-11 Borut Razem <borut.razem@siol.net>
	* regression/usart_test/usart_test.asm, regression/logic_test/logic_test.asm,
	  modules/makefile.mingw, gui/gui_breadbord.cc, plat/win32/gpsim.nsi:
	  gpsim_modules.dll renamed to libgpsim_modules.dll

2005-10-09 Scott Dattalo <scott@dattalo.com>
	* regression/tmr0_16bit/tmr0_16bit.asm: More tmr0 regressions
	testing
	* src/cod.cc, src/breakpoints.h, src/breakpoints.cc: Added the
	CommandAssertion class. These are assertions that are associated
	with instructions in such a way that when an instruction executes,
	the command assertion will issue a gpsim command line command.
	* gpsim/main.cc: removed a debug printf.
	* cli/input.cc, cmd_macro.cc, cli/ui_gpsim.cc: command assertions
	were getting inserted into the end of the command line input
	stream as opposed to interjected immediately.

2005-10-10 Scott Dattalo <scott@dattalo.com>
	* gpsim/main.cc, cli/cmd_load.cc, cli/cmd_symbol.cc,
	src/symbol.cc, src/symbol.h: Simplified the way user defined
	symbols are added to the symbol table.

2005-10-09 Borut Razem <borut.razem@siol.net>
	* plat/win32/fd2raw.cpp, cli/input.cc: win32_set_is_readable() not
	  needed for glib >= 2.6
	* src/sim_context.cc, src/i2c_ee.cc: fixed the p12ce518 regression
	  test problem
	* cli/socket.cc: g_io_channel_set_flags() not implemented on WIN32;
	  call it only on non-WIN32 platforms or if _DEBUG

2005-10-08 Scott Dattalo <scott@dattalo.com>
	* src/tmr0.cc, regression/tmr0_16bit/tmr0_16bit.asm: tmr0
	clear_break was getting called recursively. The tmr0 regression
	test now checks psa combinations.

2005-10-08 Robert Pearce <rob@bdt-home.demon.co.uk>
	* src/p12x.cc, src/p16x5x.cc, src/p16x5x.h, src/stimuli.cc,
	src/tmr0.cc, src/tmr0.h: Added support for clocking TMR0 from an
	external source. This applies to the 12-bit core where TMR0 is a
	dedicated pin.

2005-10-08 Borut Razem <borut.razem@siol.net>
	* src/processor.cc: fixed the "processor list" problem
	* gpsim/makefile.mingw, gpsim/gpsim.vcproj, plat/win32/gpsim.nsi,
	  doc/gpsimWin32.html: linking with libgtkextra-win32-2.1_dll.lib,
	  using gtkextra-win32-2.1.dll

2005-10-07 Borut Razem <borut.razem@siol.net>
	* plat/win32/gpsim.nsi: Changed version to 0.24.11

2005-09-23 J.R. Heisey <jrheisey@sourceforge.com>
	* cli/parse.yy: Added to string_option the ability to use
	a string variable. This will apply to any command that
	uses the string_option. I specifically added it for
	module library.

2005-10-03 Scott Dattalo <scott@dattalo.com>
	* configure.ac: Changed version to 0.24.11

2005-10-03 Scott Dattalo <scott@dattalo.com>
	* src/12bit-processors.cc, src/14bit-processors.cc,
	src/14bit-tmrs.cc, src/16bit-registers.cc, src/p12x.cc,
	src/p16f62x.cc, src/p18x.cc, src/pic-processor.cc, src/tmr0.cc:
	Debug cleanups.

2005-10-03 Scott Dattalo <scott@dattalo.com>
	* gui/gui_menu.cc: More source browser preference configuration.
	* gui/gui_regwin.cc: Turned register sheet rows and columns back
	on. (They were off because of a bug in gtkextra, but that bug is
	fixed now).
	* src/16bit-processors.cc, src/16bit-registers.cc, src/p18x.cc,
	src/tmr0.cc:
	The create+sfr_map() method was getting called twice fof the p18f
	devices.
	T0CON was not retaining its 0xff reset value.
	TMR0L was reporting the wrong value while it was turned off.
	* regression/run_regression.sh, regression/tmr0_16bit/18f452.lkr,
	regression/tmr0_16bit/Makefile,
	regression/tmr0_16bit/tmr0_16bit.asm,
	regression/tmr0_16bit/tmr0_16bit.stc:
	Added a regression test for TMR0.

2005-10-02 Borut Razem <borut.razem@siol.net>
	* gui/makefile.mingw: Updates to support user defined preferences.
	* doc/gpsimWin32.html: Use CSS

2005-10-01 Scott Dattalo <scott@dattalo.com>
	* src/processor.cc: Changed Processor::init_program_memory_at_index()
	so a derived processor can define its own bad_instruction type.

	Fixed a crashing bug in trim() when a empty was passed in.

2005-09-30 Scott Dattalo <scott@dattalo.com>
	* gui/gui_menu.cc, gui/gui_src.h, gui/gui_src_asm.cc: Source
	browser clean up.

2005-09-29 Scott Dattalo <scott@dattalo.com>
	* gui/gui_menu.cc, gui/gui_src.h, gui/gui_src_asm.cc: More
	preferences work; now the colors for the source browser example
	text can be configured (this configuration doesn't map back into
	the source browser yet).

2005-09-28 Scott Dattalo <scott@dattalo.com>
	* src/16bit-registers.cc, src/16bit-registers.h, src/tmr0.cc,
	src/tmr0.h: The high byte of TMR0 for the 18F family was not
	updating correctly in certain circumstances (like during single
	stepping). Thanks to Robert Merkel <robert.merkel@benambra.org>
	for reporting this issue.

2005-09-27 Scott Dattalo <scott@dattalo.com>
	* gui/gui_menu.cc: Even More work on preferences dialog window.

2005-09-26 Scott Dattalo <scott@dattalo.com>
	* gui/gui_menu.cc: Even More work on preferences dialog window.

2005-09-26 Scott Dattalo <scott@dattalo.com>
	* gui/gui_menu.cc: More work on preferences dialog window.

2005-09-25 Robert Pearce <rob@bdt-home.demon.co.uk>
	* src/p12x.cc, src/p12x.h, src/p16x5x.cc, src/p16x5x.h,
	src/pic-processor.h, src/pic-processor.cc:
	Added support for the 16C56 and the 10F200.

2005-09-23 Scott Dattalo <scott@dattalo.com>
	* src/breakpoints.cc: Breakpoint numbers are now printed in decimal.

2005-09-23 J.R. Heisey <jrheisey@sourceforge.com>
	* cli/ui_gpsim.cc: Fixed a bug were a reused string was
	not being cleared before being appended to.

	*gui/gui_symbols.cc: Added code snippet to truncate
	multi-line symbol values.

2005-09-21 J.R. Heisey <jrheisey@sourceforge.com>
	* src/cod.cc: Added an extra test to prevent a error message
	from displaying when a non cod file attempted. This really
	should validate that the file is a cod file earlier.

2005-09-20 Scott Dattalo <scott@dattalo.com>
	* gui/gui_regwin.cc: GUIRegisterList.register_size was being set
	improperly.

2005-09-20 J.R. Heisey <jrheisey@sourceforge.com>
	* gui_processor.cc, gui_processor.h, gui_register.h,
	gui_regwin.cc, gui_watch.cc: Made changes in Register_Window
	to and other code to support EEPROM memory window in the
	same way we now support RAM memory window.

2005-09-19 Scott Dattalo <scott@dattalo.com>
	* gui/preferences.cc, gui/preferences.h: New files to support user
	defined gui preferences.
	* gui/Makefile.am, gui/gui.h, gui/gui_main.cc, gui/gui_menu.cc,
	gui/gui_regwin.cc, gui/gui_watch.cc: Updates to support user
	defined preferences.

2005-09-17 Scott Dattalo <scott@dattalo.com>
	* src/14bit-tmrs.cc, src/16bit-registers.cc,
	src/16bit-registers.h, src/ssp.cc, src/uart.cc, src/uart.h:
	- Initialized data members of many classes. Thanks to Robert
	Merkel for uncovering this issue.


2005-09-16 Scott Dattalo <scott@dattalo.com>
	* gui/gui_watch.cc: Had to change the way ASCII is checked under
	windows.

2005-09-16 Scott Dattalo <scott@dattalo.com>
	* gui/gui_src_asm.cc: fixed compiler warnings
	* gui/gui_watch.cc: Removed mask, BP, type, and b15..b0 bit
	columns. Added a newbit string column.
	* src/12bit-instructions.h, src/14bit-instructions.h,
	src/16bit-instructions.h, src/breakpoints.h, src/hexutils.cc,
	src/pic-instructions.cc, src/pic-instructions.h, src/processor.cc:
	Fixed disassembly output for shadowed instructions.

2005-09-16 Scott Dattalo <scott@dattalo.com>
	* gui/gui.h, gui/gui_main.cc, gui/gui_regwin.cc, gui/gui_regwin.h,
	gui/gui_watch.cc, gui/gui_watch.h:
	Added color info to the watch window.
	Watch window columns are now adjustable.
	Centralized color processing.

2005-09-15 Scott Dattalo <scott@dattalo.com>
	* gui/gui_main.cc, gui/gui_watch.cc, gui/gui_watch.h: The state of
	the watch window is now preserved from one debug session to the
	next.

2005-09-14 Scott Dattalo <scott@dattalo.com>
	* gui/gui_src.h, gui/gui_src_asm.cc, src/breakpoints.cc,
	src/breakpoints.h, src/pic-instructions.cc,
	src/pic-instructions.h, src/processor.cc, src/trace.cc:
	Fixed usability issues with setting breakpoints through the source
	browser. The 'Drag Break' feature has been disabled since it
	really doesn't work too well for assertions (or at least doesn't
	apply). Fixed a bug that prevented toggling breaks that occur at
	the current PC.
	A new class was added to better handle the breakpoint
	classes. This new class, AliasedInstruction, is a base for the
	breakpoint class and basically will provide an API to handle
	aliased or replace instructions.

2005-09-11 Scott Dattalo <scott@dattalo.com>
	* plat/win32/gpsim.def: updated for API changes.

2005-09-11 Scott Dattalo <scott@dattalo.com>
	* src/ioports.cc, src/ioports.h, src/stimuli.cc, src/stimuli.h,
	src/value.cc, gui/gui_breadboard.cc, gui/gui_breadboard.h:
	Attributes can now be updated through the breadboard. Pin states
	can now be updated through the breadboard.


2005-09-10 J.R. Heisey <jrheisey@sourceforge.com>
	* src/cmd_gpsim.h, cli/ui_gpsim.cc: Modified one of the
	FormatProgramAddress() functions in IUserInterface and
	CGpsimUserInterface.

2005-09-09 Scott Dattalo <scott@dattalo.com>
	* src/cod.cc: delete_directory() incorrectly deleted memory.

2005-09-08 J.R. Heisey <jrheisey@sourceforge.com>
	* configure.ac, plat/win32/gpsim.nsi: bump build number

	* gui/gui_src_asm.cc, src/value.cc: Fixed crashes when
	'Add to watch' menu item is selected with no test selected
	or with white space selected.

2005-09-07 Scott Dattalo <scott@dattalo.com>
	* cli/cmd_load.cc: null pointer fix (was causing core dump in the
	regression test).
	* module/usart.cc: added the TxBuffer attribute.
	* regression/usart_test/usart_test.cc: tested usart module transmitter.

2005-09-07 J.R. Heisey <jrheisey@sourceforge.com>
	* cli/cmd_load.cc, cli/parse.yy: Fixed a bug in load command
	where you could not specify both processor and file as literal
	strings.

2005-09-06 J.R. Heisey <jrheisey@sourceforge.com>
	* gui_processor.cc, gui_processor.h, gui_register.h, gui_regwin.cc,
	gui_regwin.h, gui_watch.cc, gui_main.cc: Changed Register_Window::
	registers from type GUIRegister* to GUIRegisterList*.
	Added GUIRegisterList * m_pGUIRegisters to GUI_Processor.
	Now GUIRegisters are instantiated in a GUI_Processor for
	that other windows besides the RAM_RegisterWindow. This
	fixes a bug where you cannot add a register symbol to the
	watch window unless the RAM_RegisterWindow was opened
	once.

	* gui/gui_src_asm.cc, gui/gui_watch.cc: Removed 'Select symbol'
	pop up menu item since it was broken anyway. Added 'Add to watch'
	pop up menu item. Select symbol text in the source window, selecting
	'Add to watch' will add register symbols to the Watch window.

	* src/symbol.cc, src/symbol.h: Added findRegisterSymbol() that
	accepts a const char * as a parameter.

	gui/gui_main.cc: Call new function GUI_Processor::SetCPU() from
	GUI_Interface::NewProcessor(). SetCPU() does some additional
	initialization.

	* src/value.cc, src/value.h: Added toupper(string&) function.

	* gui/gui_src_asm.cc: Changed to use new toupper() function
	due to issues between Windows and Linux.

	* src/operator.cc: quite some type mismatch warning messages

2005-09-03 Scott Dattalo <scott@dattalo.com>
	* src/bitlog.cc, src/bitlog.h: Fixed bugs with the new
	ThreeStateEventLogger class.
	* src/uart.cc, modules/usart.h, modules/usart.cc
	* regression/usart_test/*: added a regression test for the usart
	* src/symbol.h, src/symbol.cc: attribute symbol can now be used in expressons.

2005-09-02 Borut Razem <borut.razem@siol.net>
	* doc/gpsimWin32.html: linking with glib-2.6.6, gtk+-2.6.9, pango-1.8.2

2005-09-02 Manuel Bouyer <bouyer@antioche.eu.org>
	* src/16bit-registers.cc: PCL accesses were using program memory
	indexes instead of program memory addresses.
	* src/14bit-tmrs.cc: TMR2:current_value() would return the
	contents of PR2 even when configured for normal operation.
	* src/p18x.cc: typo in porte names.

2005-09-01 Manuel Bouyer <bouyer@antioche.eu.org>
	* src/p18x.cc: Fix crash when an 18F252 is instantiated.
	* src/gpsim_time.cc: Disabled unnecessary debug printing
	* src/uart.cc: Fixed spurious uart transmit. Add io sink for
	Receiver.

2005-08-31 J.R. Heisey <jrheisey@sourceforge.com>
	* src/processor.cc: Fixed a crashing bug when the --source=disable
	option is used.

2005-08-30 J.R. Heisey <jrheisey@sourceforge.com>
	* cli/input.cc: Created function parse_string_only() which
	will parse the passed in command string with out emptying
	existing commands from the buffer.
	Modified LLStack::GetNext() and LLStack::Pop() to not remove
	the last LLStack object.
	Fixed memory leak in LLStack::Pop().

	* cli/ui_gpsim.cc: Added EOL to injected abort_gpsim_now
	command.

2005-08-30 Scott Dattalo <scott@dattalo.com>
	* src/gpsim_time.h, src/gpsim_time.cc, bitlog.cc: Made the
	constant 'END_OF_TIME' part of the Cycle_Counter class. This is
	now used to initialize members of the ThreeStateLogger class.

2005-08-30 Scott Dattalo <scott@dattalo.com>
	* src/processor.h, src/processor.cc, src/pic_processor.cc: Fixed
	step-over feature for the 18F family.

2005-08-30 Scott Dattalo <scott@dattalo.com>
	* regression/rt.sh: The new version of the regression test script
	was not checked in yesterday. This new version creates a simple
	stc file and invokes a single regression test. It then checks to
	see if the test was successful.
	* regression/simulate, regression/create_stc: Removed from CVS.

2005-08-29 J.R. Heisey <jrheisey@sourceforge.com>
	* src/ioports.cc, src/ioports.h: Added PortModule::getPin().
	Fixed a few compiler warnings.

	src/src.vcproj: Added bit.cc and bit.h.

	src/stimuli.cc, src/symbol.cc, src/symbol.h: Changed references
	of IOPORT to PortRegister.

2005-08-29 Scott Dattalo <scott@dattalo.com>
	* modules/encoder.cc, modules/logic.cc, modules/paraface.cc,
	modules/push_button.cc, modules/switch.cc, src/i2c-ee.cc, src/p12x.cc
	IOPIN::update_direction method now has a refresh option.
	* src/ioports.h, src/ioports.cc:
	- Added several options to control when I/O pins refresh their state
	  information (with respect to stimuli that is).
	- PicPortBRegister::get () had the wrong parameter signature and
	thus was not getting invoked (the parent get() method was getting
	invoked instead).
	* modules/usart.cc: updating to new iopin api. Added new code and
	removed a bunch dead code and generally cleaned things up - it's
	still not working yet though.
	* src/12bit-processors.cc, src/12bit-processors.h, src/p16f62x.cc:
	pic-processor.cc, pic-processor.h, processor.h
	set_config_word now returns true if the config word address is
	successfully set.
	* src/pic-processor.cc: Fixed bug with
	init_program_memory_at_index() - it was not setting the
	configuration word if the address was in configuration memory.
	* src/bitlog.cc: Added a 'ThreeStateEventLogger' that's analogous
	to the bit and byte logger.
	* src/intcon.cc: Turned off some debugging code.
	* src/registers.h: fixed typo in comment
	* src/stimuli.cc, src/stimuli.h: Iopin's were checking Z state
	before W state - this caused a W-state condition to be returned as
	a Z-state. In addition, the getDrivingState() was being checked as
	opposed to the getDrivenState().
	- Added getMonitor() method.
	* src/uart.h, src/uart.cc: Updating to new I/O pin design. And
	numerous changes to clean up and fix the code - this is still not
	working though.

2005-08-23 Scott Dattalo <scott@dattalo.com>
	* run_regression.sh, rt.sh: Redesigned the regression tests to
	make use of new gpsim scripting features. Also, all tests have
	been converted from absolute-mode to object-code mode.
	* digital_stim/digital_stim.asm, digital_stim/digital_stim.stc
	* instructions_12bit/instructions_12bit.asm
	* instructions_12bit/instructions_12bit.stc
	* instructions_14bit/instructions_14bit.asm
	* instructions_14bit/instructions_14bit.stc
	* instructions_16bit/instructions_16bit.asm
	* instructions_16bit/instructions_16bit.stc
	* interrupts_14bit/interrupts_14bit.asm
	* interrupts_14bit/interrupts_14bit.stc
	* logic_test/Makefile, logic_test/logic_test.asm, logic_test/logic_test.stc
	* macro_test/macro_test.asm, macro_test/macro_test.stc
	* node_test/node_test.asm, node_test/node_test.stc
	* p12ce518/p12ce518.asm, p12ce518/p12ce518.stc
	* p16f84/p16f84.asm, p16f84/p16f84.stc
	* p18f452_ports/p18f452_ports.asm, p18f452_ports/p18f452_ports.stc
	* register_stim/register_stim.asm, register_stim/register_stim.stc
	* digital_stim/16f84.lkr, digital_stim/Makefile: added
	* instructions_12bit/12c508.lkr, instructions_12bit/Makefile: added
	* instructions_14bit/16f628.lkr, instructions_14bit/Makefile: added
	* instructions_16bit/18f452.lkr, instructions_16bit/Makefile: added
	* interrupts_14bit/16f84.lkr, interrupts_14bit/Makefile: added
	* macro_test/16f84.lkr, macro_test/Makefile: added
	* node_test/16f877.lkr, node_test/Makefile: added
	* p12ce518/p12ce519.lkr, p12ce518/Makefile: added
	* p16f84/16f84.lkr, p16f84/Makefile: added
	* p18f452_ports/18f452.lkr, p18f452_ports/Makefile: added
	* register_stim/16f84.lkr, register_stim/Makefile: added


2005-08-22 Scott Dattalo <scott@dattalo.com>
	* src/ioports.cc: Fixed typo in pullup in setDefaultPullupControl
	method.

2005-08-21 J.R. Heisey <jrheisey@sourceforge.com>
	* cli/input.cc, cli/input.h, gpsim/main.cc: Added two
	command options. Option -E will echo commands to the
	console. Useful for stc debugging. This will also
	display all the command line parameters. Useful when
	another tool launches gpsim but does not display the
	command line.

	gpsim/main.cc, src/init.cc: Option '-S disable' will
	prevent source code from being loaded. Usefule for
	automated regression testing. '-S enable' will enable
	source code loading. See online help.

	* src/p16x7x.cc: Fixed an sign/unsigned warning.

	* src/processor.h: Test function for whether source file
	is open.

	* src/sim_context.cc, src/sim_context.h: Added new
	global boolean property called EnableSourceLoad. Setting
	it to false will prevent source code from being loaded.
	Purpose is when gpsim is used for automated regression
	testing to speed things up.

	* src/stimuli.cc: Fixed a crashing bug when port()
	operator is used with out any module explicitly entered
	as a parameter.

	* src/symbol.h, src/value.h: Added findBoolean() to
	Symbol_Table.

	* src/value.h: Added a equals operator to Boolean.

2005-08-19 J.R. Heisey <jrheisey@sourceforge.com>
	* cli/input.cc: Added code to allow stc files with <CR><LF>
	for Windows EOL to be read under Linux.

2005-08-18 J.R. Heisey <jrheisey@sourceforge.com>
	* src/processor.cc, src/processor.h, src/registers.cc,
	src/symbol.cc: Added two processor boolean attributes
	BreakOnValidRegisterRead and BreakOnInvalidRegisterWrite.

	* src/breakpoints.cc, src/breakpoints.h, src/cmd_gpsim.h,
	plat/win32/gpsim.def, cli/input.cc, cli/ui_gpsim.cc,
	gpsim/main.cc: Added -e or --exit command line option
	that accepts a parameter onbreak. This causes gpsim to
	exit when the simulation halts.

2005-08-11 Scott Dattalo <scott@dattalo.com>
	* src/breakpoints.cc, src/breakpoints.h: Allowed breakpoint
	expressions for breakpoint instructions to act like assertions.
	* src/cmd_manager.h, src/cod.cc, src/gpsim_interface.h,
	  src/modules.cc, src/modules.h, cli/input.cc:
	Added the capability to run multiple module scripts.
	* cli/ui_gpsim.cc: Fixed bug guint64 formatted output.
	* regression/logic_test/Makefile, regression/logic_test/logic_test.asm:
	The new I/O port design more correctly implements I/O pins and
	this exposed a bug in the regression test. Also, this regression
	test was used to develop the multiple Module Script feature.

2005-08-11 J.R. Heisey <jrheisey@sourceforge.com>
	* src/stimuli.cc, src/stimuli.h, src/symbol.cc, src/symbol.h:
	Quick fix of when trying to attach an input data stimuli that
	was broken a couple of checkins ago.

2005-08-11 Borut Razem <borut.razem@siol.net>
	* plat/win32/gpsim.nsi: bump build number

2005-08-11 Scott Dattalo <scott@dattalo.com>
	* src/ioports.cc, src/ioports.h: Added the PeripheralSignalSource
	class to simplify the connection of I/O pins to peripherals. Also,
	added more documentation about the I/O port design.
	* src/p16x7x.h, src/p16x7x.cc, src/p16f87x.cc: The Analog to
	Digital convertor peripheral now connects to I/O pins again. Also,
	the A2D module was redesigned so that less of the internal
	implementation is exposed.
	* src/14bit-tmrs.h, src/14bit-tmrs.cc, src/ssp.h, src/ssp.cc,
	src/p16x6x.cc: Updated the peripheral connections with the new
	PeripheralSignalSource class.

2005-08-10 J.R. Heisey <jrheisey@sourceforge.com>
	* src/stimuli.cc, src/stimuli.h, src/symbol.cc, src/symbol.h,
	cli/cmd_attach.cc, cli/cmd_attach.h, cli/parse.yy,
	cli/scan.ll, plat/win32/gpsim.def: Modified
	the attach command with the pin() and port() operators.
	Now you can use one of 4 variations of these operators to
	specify the module, port name and/or pin number that represents
	the underlying stimulus object. An example of how to use: if
	a pin number is defined as a program file symbol, you
	may use the symbol name in the port() or pin() operators.
	This way your STC file can be more generic and support a
	variety of firmware code files as long as you use the same
	symbol name for the pin. See the online help for more details.

	The pin() operator refers to package based pins. The port()
	operator refers to port based pins. Other stimulus may still
	be refered to using just the name of the stimulus.

	* src/attributes.cc: Changed a few global symbols so that
	Symbol_Table::Clear() does not remove them.

	* src/fopen-path.cc, src/fopen-path.h, gpsim/main.cc:
	Fixed -L source path command line option.
	Added code to support a gpsim SourcePath global string symbol
	that give command prompt access to the source search path.

	* src/ioports.h: Fixed a warning message about the destructor
	of PinModule not being virtual.

	* src/symbol.cc,h, cli/cmd_symbol.cc: Added the ability to
	use the '.' character as a trailing wild card in the symbol
	command. Example PIC. will list all symbols that begin with
	the letters PIC.

2005-08-04 Scott Dattalo <scott@dattalo.com>
	* gui/gui_breadboard.cc, src/symbol.h, src/symbol.cc,
	src/stimuli.cc:
	Verified that template issues with gcc 3.4.X have been resolved
	and removed a #define that had beed added to get around this.

2005-08-06 Scott Dattalo <scott@dattalo.com>
	* src/ssp.h, src/ssp.cc: Updated the SSP peripheral with the new
	I/O port API.
	* src/14bit-processors.h, src/p16f87x.cc, src/p16f87x.h,
	src/p16x6x.cc, src/p16x6x.h, src/p16x7x.cc, src/p16x7x.h: Updated
	to the new SSP API.

2005-08-04 J.R. Heisey <jrheisey@sourceforge.com>
	* symbol.cc, symbol.h: Fixed the template compile problems for
	gcc 3.4.4 due to new bugs in gcc. I didn't see this issue using
	gcc 3..3.3 on linux. I only have 3.4.4 version of the compiler
	under cygwin. I've left the #define commented out so someone can
	test it under linux before removing the #ifdef's.

2005-08-04 Scott Dattalo <scott@dattalo.com>
	* gui/gui_breadboard.cc, src/symbol.h, src/symbol.cc, src/stimuli.cc:
	Backed out some of the symbol changes made by JR because the code
	doesn't compile on Linux (gcc 3.4.2). At the moment, this means
	that stimuli and node dumps do not work.

2005-08-04 J.R. Heisey <jrheisey@sourceforge.com>
	* cli/cmd_node.cc, plat/win32/gpsim.def, gui/gui_breadboard.cc,
	modules/resistor.cc, src/stimuli.cc, src/stimuli.h,
	src/symbol.cc, src/symbol.h, src/value.h: Eliminated the
	node_list and stimulus_list. There are now Symbol_Table
	functions and iterators available for node_symbol and
	stimulus_symbol objects which contain Stimulus_Node and
	stimulus objects respectively.
	Adjusted the way stimulus and stimulus_Node objects are
	named. Unnamed objects are not put into the symbol table.
	The respective new_name() functions will add the objects
	into the symbol table appropriately. Removes several
	references that added these objects to the symbol table.

	Also modified the PullupResister to name the res IO_bi_directional
	i/o pin to pullupname + ".pin". Now the PullupResister
	exists in the symbol table as a module with what ever you
	named it. The pin is attribute of the PullupResister module.
	Whew!

2005-08-04 Scott Dattalo <scott@dattalo.com>
	* src/uart.cc, src/uart.h, src/p16x6x.cc, src/16bit-processors.cc,
	src/16bit-registers.cc, src/16bit-registers.h, src/p16f62x.cc:
	Add I/O source and sink connections to the usart peripheral. So
	now the usart is connected to I/O pins using the new I/O port design.

2005-08-02 J.R. Heisey <jrheisey@sourceforge.com>
	* src/os_dependent.cc, src/processor.cc,h, src/cod.cc,
	plat/win32/gpsim.def: Fixed a problem where loading a
	program file (no STC) using the GUI resulted source code
	not being found even though that source was in the same
	folder as the program file.

	* gui/gui_menu.cc: Fixed the display of cycle count in
	cycles where %Lx was used in a sprintf instead of the
	platform independent project macro PRINTF_INT64_MODIFIER.

2005-08-02 Scott Dattalo <scott@dattalo.com>
	* src/16bit-processors.cc, src/p18x.cc: The new I/O port register
	symbols were getting added to the symbol table twice. Also, the
	eeprom peripheral for some of the 18f devices was not getting
	created.

2005-08-02 J.R. Heisey <jrheisey@sourceforge.com>
	src/cmd_gpsim.h
	* src/cod.cc: Removed an error message from PicCodProgramFileType::
	open_a_file() that is handled externally.

	* src/registers.cc: Fixed a bug in RegisterValue::toString()
	not displaying enough digits.

	* src/value.h, src/symbol.h, src/registers.h, gui/gui_register.h:
	Added some conversion and equals operators.

	* cli/ui_gpsim.cc, src/cmd_gpsim.h: Added several string
	formatting routines.

	* plat/win32/gpsim.def: Updated for new pin I/o routines.

	* gui/gui_watch.cc, gui/gui_watch.h: Updated display of values
	to account for uninitialized bits and bit masked register
	symbols.

2005-08-01 Scott Dattalo <scott@dattalo.com>
	* src/p16x5x.h, src/p16x5x.cc: Upgraded the P16C54 and P16C55 to
	the new I/O port design.

	* src/16bit-processors.cc, src/16bit-registers.cc,
	src/16bit-registers.h, src/p18x.cc, src/p18x.h:
	Completed converting the 16-bit core I/O ports to the new I/O
	redesign (note - the peripheral-to-I/O mapping still needs to be
	completed).

	* src/ioports.h, src/ioports.cc: deprecated the old PIC_IOPORT
	class and all of its children.

2005-08-01 Scott Dattalo <scott@dattalo.com>
	* src/14bit-processors.cc, src/14bit-processors.h,
	src/14bit-tmrs.cc, src/14bit-tmrs.h, src/intcon.cc, src/intcon.h,
	src/pir.h, src/p16x6x.cc, src/p16x6x.h, src/ioports.cc,
	src/ioports.h, src/p16x7x.cc, src/p12x.cc:

	-- The intcon and pir registers were not getting set up correctly for
	   the midrange devices.
	-- Added 'sinks' and 'sources' for the CCP module.

	* src/16bit-processors.cc, src/16bit-processors.h, src/p18x.cc,
	src/p18x.h: Began porting the new I/O port design to the 16bit
	core devices.

	* src/symbol.cc: Added a diagnostic message that is printed
	whenever a register symbol with a null cpu is added to the symbol
	table.

	* regression/run_regression.sh, regression/p18f452_ports.asm,
	regression/p18f452_ports.stc:
	-- Added new regression test to test the P18F family I/O ports.
	-- Redesigned the processor construction sequence.
	-- The P18F1220 did not have PortB pullup resistors.

2005-07-30 J.R. Heisey <jrheisey@sourceforge.com>
	* src/symbol.cc, src/symbol.h: Added a list of symbols
	that are defined from the gpsim command line. The list
	and the symbol values are preserved when the symbol table
	is cleared due to a new processor being allocated.
	Removed the add() function that accepted a symbol type
	as a string. See comments for cmd_symbol.cc,h.

	* src/attributes.cc, src/sim_context.cc, src/sim_context.h:
	Changed or added calls to the symbol table.

	* cli/ui_gpsim.cc, src/cmd_gpsim.h: Added functions to render
	integer values to strings based on a system level defined
	radix. The radix will be exposed as a global attribute.
	There are distinct radix definitions for program addresses,
	RAM addresses and data values. Will expose a global attribute
	to define the prefix for displaying hexidecimal values. The
	default is '$'.

	* gpsim/main.cc: Added -D command line option for defining
	symbols and their values to be placed into the symbol
	table.

	* src/value.cc, src/value.h: Added string parsing and
	constructor functions for each data type. Used for
	the command line parsing of symbol definitions.

	* cli/cmd_symbol.cc,h, cli/cmd_load.cc,h, cli/parse.yy:
	The load command will now accept symbols as input for the
	filename. Combined with the symbol defines on the command
	line, one STC file can be used to open any program file by
	defining a symbol on the gpsim command line and referencing
	that symbol in the load commmand.
	* The symbol command can now be used to create a symbol from
	the gpsim command prompt or an STC file. The syntax is
	symbol <newsymbol>=<value>. Types include string, integer,
	float and boolean.

	* gpsim/gpsim.vcproj, gui/gui_menu.cc, gui/gui_regwin.cc:
	Removed the references for gtk_file_selection_get_filename_utf8().
	This was added due to compile time issues with gtkextra-2.1
	under Visual Studio .NET. The VS.NET build links a gtkextra
	static lib into the exe. Even if you can get it to compile,
	sometimes gpsim will crash before its main() function is
	entered. The use of gtkextra-2.1 under VS.NET is not
	recommended and I have reverted the gpsim.vcproj back to
	gtkextra-2.0.

	* src/program_files.cc: Changed error handling logic
	to prevent a "list file not found" error from displaying
	in an inappropriate situation.

2005-07-29 Scott Dattalo <scott@dattalo.com>
	* src/ioports.cc, src/ioports.h, src/p12x.cc, src/p16x6x.cc,
	src/registers.h, src/stimuli.cc, src/stimuli.h, src/symbol.cc,
	src/tmr0.cc, src/tmr0.h:
	Introduced the concept of Multi-State logic to stimuli.


2005-07-15 J.R. Heisey <jrheisey@sourceforge.com>
	* src/symbol.cc: Added check to prevent a symbol name of a null string
	from being added as a symbol.

	* src/stimuli.cc: Added a check to prevent a IOPIN name null string
	pointer from being added to the symbol table.

	* modules/resistor.cc: PullupResistor() constructor was setting
	its attribute before it had set its own name resulting in the
	attribute name not being scoped correctly.

	* src/breakpoints.cc, src/breakpoints.h, cli/cmd_break.cc,
	cli/cmd_break.h: Added code to support break expressions of
	the form (Reg & mask BoolOp value) where BoolOp includes
	<, >, <=, >= and != operators. Just need to change the print()
	and action() console output functions of the break classes and
	uncomment code in parse.yy.

2005-07-26 Scott Dattalo <scott@dattalo.com>
	* src/bit.h, src/bit.cc, src/Makefile.am: Added new files to
	handle a 'Bit' object. This code was formerly tucked away in
	registers.cc.
	* src/stimuli.h, src/ioports.h, src/ioports.cc: Added a control
	object for the PinModule to handle I/O pin pullups. Also, added an
	option to prohibit certain stimulus updates whenever I/O pin state
	information changes.

2005-07-26 Scott Dattalo <scott@dattalo.com>
	* src/16bit-instructions.cc,
	regression/instructions_16bit/instructions_16bit.asm: Fixed bug
	with 16bit processors Table Read (more index vs address). Thanks
	to Peter Onion for pointing this (and other 16bit stuff out).

2005-07-26 Scott Dattalo <scott@dattalo.com>
	* src/i2c-ee.cc, src/i2c-ee.h, src/ioports.cc, src/ioports.h,
	src/p12x.cc, src/stimuli.cc, src/stimuli.h: Fixed 12CE51x internal
	eeprom peripheral.
	* gui/gui_menu.cc, gui/gui_regwin.cc: Removed dependency on gtk
	win32 port.

2005-07-25 Scott Dattalo <scott@dattalo.com>
	* regression/instructions_16bit/instructions_16bit.asm: added
	tests for multi-word instructions.
	* regression/p12ce518/p12ce518.asm: debugging eeprom i2c interface
	* gui/gui_src_opcode.cc, src/16bit-instructions.cc,
	src/16bit-instructions.h: Fixed more problems with address <-->
	index mapping. (and there are still some issues remaing with the
	program memory viewer).
	* src/i2c-ee.cc, src/ioports.cc, src/ioports.h, src/p12x.cc,
	src/p12x.h: The eeprom i2c interface is broken...

2005-07-23 Borut Razem <borut.razem@siol.net>
	* gpsim/gpsim.vcproj, doc/gpsimWin32.html, plat/win32/gpsim.nsi:
	  use pthreads-w32-2-7-0-release
	* cli/scan.ll: corrected typo

2005-07-22 Scott Dattalo <scott@dattalo.com>
	* cli/cmd_disasm.cc: rnages were disassembling wrong addresses
	* gui/gui_src_asm.cc: cleanup
	* src/12bit-processors.cc, src/14bit-processors.cc,
	  src/14bit-registers.cc, src/14bit-tmrs.cc, src/attributes.cc,
	  src/gpsim_classes.h:
	Implenting new ioport design for 12bit cores.
	Fixed bugs with resets.
	* src/16bit-hexdecode.cc, src/16bit-instructions.cc,
	  src/16bit-processors.h, src/16bit-registers.cc, src/cod.cc:
	16bit processors were not getting loaded properly due to some
	bugs with address <-> index mapping

2005-07-21 Scott Dattalo <scott@dattalo.com>
	* src/ioports.h, src/ioports.cc: classes derived from PortRegister
	can now specify the type of PinModule class.

2005-07-15 Scott Dattalo <scott@dattalo.com>
	* src/12bit-processors.cc, src/14bit-processors.cc,
	src/14bit-processors.h, src/16bit-registers.cc,
	src/16bit-registers.h, src/intcon.h, src/ioports.cc,
	src/ioports.h, src/p16f62x.cc, src/p16f87x.cc, src/p16x6x.cc,
	src/p16x6x.h, src/p16x7x.cc, src/p16x7x.h, src/p16x8x.cc,
	src/p16x8x.h, src/pic-processor.cc, src/pic-processor.h,
	src/registers.cc, src/registers.h, src/stimuli.cc, src/stimuli.h,
	src/tmr0.cc, src/tmr0.h, src/uart.cc, src/uart.h:

	I/O Port Redesign: These files have been updated to accommodate a
	new I/O Port design. Currently the design applies only to the
	mid-range PIC family, but will be propogated to the 12 and 16 bit
	cores too.

	In summary, the I/O pins are now managed with I/O pin modules. A
	port register maintains an array of these modules. In the old
	design, the I/O pins were managed directly by the Port
	registers. New classes have been designed to allow multiple signal
	sources, signal controls, and signal sinks for I/O pins. These new
	objects can be added at will and thus allow the exact behavior of
	an I/O pin be tailored to a specific processor (and even changed
	dynamically). Thus a base class in the processor heirarchy can
	instantiate a register object, and the derived processors populate
	it with custom functionality.

	* cli/cmd_break.cc: documentation clean up
	* modules/usart.cc, modules/usart.h: tinkering -
	* regression/logic_test/Makefile,
	regression/logic_test/logic_test.asm: Incorporates an un-released
	gpasm feature of the .direct macro. This feature allows multiple
	strings to be passed to gpasm.
	* regression/p16f84/p16f84.asm: Bug fix in PORTB pullup test


2005-07-15 J.R. Heisey <jrheisey@sourceforge.com>
	* gui/gui_watch.cc, gui/gui_watch.h: Fixed problem with
	register symbol names not displaying in the Watch
	window. Introduced this bug when I made the bit mask feature
	in register symbols.

	* gui/gui_regwin.cc:  Fixed problem with register symbol
	names not displaying in the RAM window. Introduced this
	bug when I made the bit mask feature in register symbols.

2005-07-11 J.R. Heisey <jrheisey@sourceforge.com>
	* src/breakpoints.cc, h, src/cmd_gpsim.h, src/symbol.cc,
	plat/win32/gpsim.def, gpsim/main.cc, cli/ui_gpsim.cc,
	cli/ui_gpsim.h: Made changes so that when hitting a
	break will display program and register address symbols.

	* src/breakpoint.cc: Removed calls to eval_Expression()
	where it is not necessary. Enhanced the break on value
	action text to include symbols and bit mask value.

	* cli/ui_gpsim.cc,h, gpsim/main.cc: Added functions that
	help display program and register address symbols along
	with the address value.

	* src/trigger.cc: Fixed problem in TriggerObject::
	eval_Expression() that was preventing non-expression
	based break points to not fire.

	* src/symbol.cc: Added check in Symbol_Table::
	findRegisterSymbol() to get register bit mask defined
	for the CPU when the passed in value is zero.


2005-07-10 J.R. Heisey <jrheisey@sourceforge.com>
	* plat/win32/gpsim.def, src/symbol.cc, src/symbol.h:
	Change function name from findRegister() to findRegisterSymbol()
	to reflect the return type. Added new findRegisterSymbol()
	version that takes a single address parameter. Did some
	minor code optimization of the findRegister() function.
	Due to the introductions of register symbol bit mask, I
	modified findRegister() to only return symbols that are
	defined for all bits of the register.

	* src/processor.cc: Changed some entry condition checks to
	allow processor::disassemble to disassemble one program
	address. Also made some minor code optimizations.

2005-07-06 Borut Razem <borut.razem@siol.net>
	* src/breakpoints.cc, src/gpsim_time.cc, src/interface.cc, src/processor.src, src/trace.cc:
	  declare dummy_bp, dummy_cycles, dummy_gi, dummy_get_active_cpu, dummy_set_active_cpu
	  and dummy_trace as non static to compile with gcc 3.4.4
	* plat/win32/gpsim.nsi: corrected version number to 0.21.8
	* gpsim/gpsim.vcproj, gpsim/makefile.mingw: linking with libgtkextra-win32-2.1.lib
	* doc/gpsimWin32.html: linking with gtk+extra-2.1.1, glib-2.6.5,
	  gtk+-2.6.8, pango-1.8.0, 1.9.0, fontconfig-2.2.2-20040412
	* plat/win32/make.mingw: change gcc command line options mcpu with mtune
	  to compile with gcc 3.4.4

2005-07-08 J.R. Heisey <jrheisey@sourceforge.com>
	* plat/win32/gpsim.def, src/symbol.cc, src/symbol.h:
	Added version of Symbol_Table::findRegister() that takes a bitmask
	parameter. Added Symbol_Table::findConstant() for future use.
	Need to implement a symbol to referenced from address
	cross reference.

	* gui/gui_src_opcode.cc, src/processor.cc: Fixed issues
	accessing program memory arrays using address instead
	of an appropriate index.

	* gui/gui_src_opcode.cc, src/processor.cc: Fixed issues
	with Processor::disassemble() function not traversing
	over break points to find the base instruction object.


2005-07-07 J.R. Heisey <jrheisey@sourceforge.com>
	* cli/cmd_break.cc, cli/cmd_break.h: Code to display
	address labels in break related messages.

	* plat/win32/gpsim.def, src/pic-instructions.cc,
	src/pic-instructions.h, src/processor.cc, src/processor.h,
	src/symbol.cc: Code to display address labels in a
	disassembly output. Added members to Processor class to
	support a page mask and offset mask that can be used to
	calculate absolute addresses for disassembly output for
	JUMP and CALL instructions. See the functions
	CalcJumpAbsoluteAddress() and CalcCallAbsoluteAddress();

2005-07-06 J.R. Heisey <jrheisey@sourceforge.com>
	* src/stimuli.cc, src/symbol.cc, src/symbol.h:
	Fixed a problem where renamed stimulus_symbol objects
	were getting lost. This caused a error when running
	the regression test digital_stim.

2005-07-06 Borut Razem <borut.razem@siol.net>
	* plat/win32/gpsim.nsi: NSIS 2.07 compatible

2005-07-05 J.R. Heisey <jrheisey@sourceforge.com>
	* src/symbol.cc, h: The access to a derived object's name()
	function was broken when I made the name() function in the
	base class const. I've propogated the const attribute to
	overriden versions of name().
	- Somewhere along this process on of my program variables stopped
	being added to the symbol table. So, I've changed the if statement
	that determines when a duplicate variable exists in the symbol
	table.
	- I've added a function called findProgramAddressLabel() so
	that a label name can be displayed where appropriate.

	* src/breakpoints.cc: Changed ::print() functions to output
	program memory labels where they could. Changed implementation
	to use the Console object rather than cout.

	* src/registers.cc: InvalidRegiser() constructor was not setting
	its address member variable. Now the address is included in the
	console warning.

	* src/attributes.cc: WarnModeAttribute() was not setting its
	value member variable.
	-  init_attributes() added some constant attributes for reset types.

2005-07-01 Scott Dattalo <scott@dattalo.com>
	* cli/scan.ll, cli/parse.yy, cli/input.cc: The recently added
	command line error processing change did not compile under Linux
	and was free a constant pointer.
	* gui/gui_main.cc, gpsim/main.cc: The command line prompt was
	always selected.

2005-07-01 J.R. Heisey <jrheisey@sourceforge.com>
	* cli/scan.ll, cli/parse.yy, cli/input.cc,h:
	- Full command line text is displayed when a command line error
	occures.
	- Command line buffers are cleared appropriately after a command
	line error.

2005-06-30 Scott Dattalo <scott@dattalo.com>
	* regression/logic_test/logic_test.asm,
	regression/logic_test/Makefile, regression/logic_test/16f873.lkr:
	Added a regression test for gpsim Logic Modules.

2005-06-30 J.R. Heisey <jrheisey@sourceforge.com>
	* src/breakpoints.cc, src/breakpoints.h, cli/cmd_break.cc:
	New break point dump filtering.
	break r dumps register read break points.
	break w dumps register write break points.
	break e dumps execution break points.

	* cli/cmd_disasm.cc: Updated disassemble command on line help
	to reflect reality.

2005-06-30 Scott Dattalo <scott@dattalo.com>
	* cli/input.cc, gpsim/main.cc, gui/gui_main.cc,
	src/gpsim_interface.h, src/interface.cc, src/modules.cc,
	src/modules.h, src/processor.cc:
	Added methods to the gpsim_interface class that manage the state
	of gui. This is done so that gui-based modules can query the gui
	state and conditionally build their graphical portions.
	* modules/led.cc, modules/logic.cc:
	The Logic and LED modules now will not build any graphics if the
	gui is not initialized.
	Pin names were getting added to the symbol twice.

2005-06-27 Scott Dattalo <scott@dattalo.com>
	* src/stimuli.cc, src/stimuli.h:
	Added putState()/getState() methods and removed putDrivingState
	method from the stimulus class. The purpose of this is to abstract
	away whether a node is driving or not. The main affect is in the
	gui breadboard where the state of I/O pins is queried.
	* gui/gui_breadboard.cc, gui/gui_breadboard.h, modules/usart.cc,
	modules/video.cc, modules/video.h, src/14bit-tmrs.cc,
	src/i2c-ee.cc, src/ssp.cc,
	src/uart.cc: Updated calls to new stimulus class API.
	* modules/logic.cc, modules/logic.h: The logic gate modules had
	bit rotted.

2005-06-26 J.R. Heisey <jrheisey@sourceforge.com>
	* plat/win32/gpsim.def, src/processor.cc, src/processor.h:
	New function Processor::init_program_memory_at_index() to
	continue the separation of PM address from PM array index.

2005-06-26 Scott Dattalo <scott@dattalo.com>
	* src/trace.cc: The wrong variable was being used to index the
	program counter array. This caused the trace to get an invalid
	instruction.

2005-06-26 Scott Dattalo <scott@dattalo.com>
	* INSTALL: Added notes from Bas Wijnen regarding Debian.

2005-06-25 Scott Dattalo <scott@dattalo.com>
	* src/symbol.cc, regression/simulate: The new 'BITS' indicator for
	register symbol queries broke the regression test. Now, the BITS
	indicator is only displayed if only a portion of the register
	applies to a register symbol.

2005-06-24 J.R. Heisey <jrheisey@sourceforge.com>
	* src/modules.cc: Fixed a bug in Module::get() where
	a derive class does not override this function, now
	this function will return a null string.
	This fixes problems when a derived class is being
	displayed in the GUI symbol window causing a UTF-8
	warning.
	* src/symbol.cc: Fixed an introduced null pointer
	exception.

2005-06-23 J.R. Heisey <jrheisey@sourceforge.com>
	* plat/win32/gpsim.def, src/symbol.cc, src/symbol.h:
	register_symbol::m_uMask is used to mask out bits not
	associated with the symbol after retrieving the value
	from the register. Masked bit values are right shifted such
	that if the 16th bit is high in the register and
	m_uMask = 0x80, then the symbol value returned
	or displayed will be one.
	Likewise to set the 16th bit of our example register_symbol
	you would set the register_symbol value to 0x01 and
	not 0x80. No other bits in the register are changed.
	It works as if this symbol is its own register. The encoding
	into the target register is hidden by register_symbol.
	The default value of m_uMask is 0xff so that no bits are
	masked out.
	An new version of Symbol_Table::add_register() may be used
	to add masked register_symbol objects to the symbol table.
	register_symbol::copy() is changed to return the correct
	symbol string.

2005-06-21 J.R. Heisey <jrheisey@sourceforge.com>
	* cli/cmd_run.cc: Added help text saying that CTRL->C
	will stop a running simulation.

	* src/breakpoints.cc, src/processor.cc, src/processor.h,
	src/trace.cc, plat/win32/gpsim.def, gui/gui_profile.cc,
	gui/gui_src_asm.cc:
	There was significant ambiguity for some functions
	that appear to accept an simulation address but acted upon
	it as a ProgramMemoryAccess index. The ProgramMemoryAccess
	indexing operator was a prime example. I have eliminated
	the indexing operator and added the functions getFromAddress()
	and getFromIndex() to make things more explicitly clear.
	I have also removed put() and get() and added putToAddress()
	and putToIndex(). Other new functions are
	hasValid_opcode_at_address() and hasValid_opcode_at_index().
	This mostly effected gui code so the simulation itself
	should have no impact.
	The original intent of this change was to fix bugs in the
	gui where double clicking on a breakpoint icon in the
	source window would not toggle the breakpoint.

2005-06-17 J.R. Heisey <jrheisey@sourceforge.com>
	* cli/cmd_dump.cc: dump register for special registers
	broken when pReg->isa() and Register::SFR_REGISTER were
	not being used. Now we dump the registers listed in
	MemoryAccess::SpecialRegisters.

	* cli/input.cc: Implemented the ability to break running
	firmware using Ctrl->C key when running under Windows.
	It would previously exit gpsim.

	* gpsim/main.cc: Changed logic so the -i on the gpsim
	command line will not attempt to start the gui interface.

	* cli/cmd_break.cc, cli/cmd_clear.cc, cli/cmd_disasm.cc,
	cli/cmd_dump.cc, cli/cmd_frequency.cc, cli/cmd_help.cc,
	cli/cmd_load.cc, cli/cmd_module.cc, cli/cmd_processor.cc,
	cli/cmd_step.cc, cli/cmd_stimulus.cc, cli/cmd_trace.cc,
	cli/cmd_version.cc, cli/command.cc, cli/command.h:
	Implemented command abbreviations. Made abbreviations for
	several often used commands.

2005-06-14 J.R. Heisey <jrheisey@sourceforge.com>
	gui/gui_src.h, gui/gui_src_asm.cc, gui/gui_statusbar.cc,
	src/processor.cc, src/processor.h, src/registers.h:
	Fixed some problems with the source window optimization.
	Fixed problem with the text search dialog not searching
	alternate source windows.
	Fixed problem with Set PC Here from an alternate window.

2005-06-13 J.R. Heisey <jrheisey@sourceforge.com>
	*src/cmd_manager.cc, src/cmd_manager.h, src/modules.cc,
	cli/cmd_shell.cc: Fixed introduced bug where the command
	line interface from a library module was not accessible.
	A ! bang character alone lists the command line interfaces.

2005-06-13 Scott Dattalo <scott@dattalo.com>
	* configure.ac: Fixed recently introduced typo.
	* src/attributes.cc: Cycle counter attribute now prints correctly again.
	* src/processor.cc, src/processor.h: fixed bug in
	IsAddressInRange()  method, also reversed return value to match
	meaning of name (now returns true if the address is in range).
	* src/symbol.cc: Symbol table dump was not showing symbol values.
	* src/registers.cc: fixed warning message for when invalid
	registers are accessed.

2005-06-10 Scott Dattalo <scott@dattalo.com>
	* src/stimuli.cc, src/stimuli.h, src/symbol.cc, src/symbol.h:
	Stimuli symbols were not getting added to the symbol table when
	their name was being changed.

2005-06-10 J.R. Heisey <jrheisey@sourceforge.com>
	*src/gpsim_object.cc,h: Small change to allow name() call
	in a const variable context.

	*plat/win32/gpsim.def, src/processor.cc, src/stimuli.cc,
	src/symbol.cc, src/symbol.h, gui/gui_profile.cc: Changed
	the implementation of the Symbol_Table class to order
	by symbol name so that a binary search will improve lookup
	speed.

2005-06-10 Scott Dattalo <scott@dattalo.com>
	* cli/cmd_stimulus.cc, doc/gpsim.lyx: Updated documentation.

2005-06-09 J.R. Heisey <jrheisey@sourceforge.com>
	*cli/cmd_module.cc: Added extra help for module command.

	*gui/gui_src.h, gui/gui_src_asm.cc, plat/win32/gpsim.def,
	src/processor.cc,h: Changed the parsing of the source for
	formatted display to speed things up during file loading.
	Source is now cached in a form for rendering to the formatted
	text window.

2005-06-09 Scott Dattalo <scott@dattalo.com>
	* gui/gui_main.cc, gui/gui_regwin.cc, gui/gui_src.cc,
	gui/gui_src_asm.cc, gui/gui_src_opcode.cc, configure.ac:
	Found the source of a bug that causes gpsim to hang when gtk-2.6.7
	and gtkextra-2.0 are used. The problem is either with gtkextra or
	the interaction of it with gtk. gpsim currently has in place a
	stop-gap measure to prevent the problem from keeping the simulator
	from being unusable.

2005-06-06 J.R. Heisey <jrheisey@sourceforge.com>
	*src/os_dependent.cc: The environment variable GPSIMPATH may be
	used to specify folders where shared libraries may be found. This
	is primarily for windows developers of gpsim.
	- Small change to prevent load_library() from displaying an error
	message that is not needed.

	*cli/cmd_node.cc: Use a reference instead of allocating a string
	on the local stack.

	*modules/modules.vcproj: Changed Visual Studio build of modules
	to libgpsim_modules.dll


2005-06-04 Scott Dattalo <scott@dattalo.com>
	* gui/gui.h, gui/gui_menu.cc, gui/gui_object.cc, gui/gui_object.h,
	gui/gui_src_asm.cc, gui/gui_statusbar.cc, gui/gui_statusbar.h:
	-- removed the cycle counter and time view from the status bar of
	the register and source windows and moved them to the window that
	contains the buttons.
	-- fixed text-width bugs in the status window.
	-- rewrote the implementation of the gui update code.
	-- Created a 'TimeWidget' class and a 'TimeFormatter' class for
	displaying the cycle counter object.
	-- Added a MainWindow class (kind of empty now).
	-- Re-introduced a few of the GTKWAIT macros.

2005-06-04 Scott Dattalo <scott@dattalo.com>
	* configure.ac, gpsim/Makefile.am: remove the explicit checks for
	the pthread library.

2005-06-04 Scott Dattalo <scott@dattalo.com>
	* gpsim/main.cc: Allow filenames whose first character is a
	number.

2005-06-04 Scott Dattalo <scott@dattalo.com>
	Patch from: Rob Pearce <rob@bdt-home.demon.co.uk>
	* src/cod.cc: Fixed gramatical error.
	* src/eeprom.cc, src/eeprom.h: Added a new state to the eeprom
	state machine to fix ??
	* src/ioports.cc: fix to the 628 porta comparator.

2005-06-03 Scott Dattalo <scott@dattalo.com>
	* gui/gui_main.cc: Added a call to g_main_iteration() to allow GTK
	events to get processed. (This replaces the GTKWAIT macro that was
	removed in the previous commit).

2005-06-02 Scott Dattalo <scott@dattalo.com>
	* gui/gui_src_asm.cc, gui/gui_main.cc: Removed GTKWAIT
	macros. Apparently on newer versions of GTK these macros block
	indefinitely. On really old versions of GTK (pre 2.0) these macros
	were necessary.

2005-05-26 J.R. Heisey <jrheisey@sourceforge.com>
	* src/breakpoints.cc,h, plat/win32/gpsim.def: added
	register assertions functionality. Can now assert the
	register value with !=, <=, >=, <, and > operators.

2005-06-01 Scott Dattalo <scott@dattalo.com>
	* src/os_dependent.cc: Printed an error message if
	a shared library fails to open.

2005-05-26 J.R. Heisey <jrheisey@sourceforge.com>
	* src/program_files.cc: Fixed crashing bug when no file
	types are able to open a program file.

2005-05-25 Borut Razem <borut.razem@siol.net>
	* plat/win32/gpsim.nsi, extras/lcd/makefile.mingw:
	added missing files to the WIN32 installation package in
	order to be able to compile the LCD modue; make LCD module
	mingw makefile a litle bit more flexible

2005-05-24 Scott Dattalo <scott@dattalo.com>
	* src/cod.cc, src/breakpoints.cc, src/trigger.cc,
	regression/assertions/assertions.asm: Added support
	for scripts embedded in .cod files.

2005-05-24 Scott Dattalo <scott@dattalo.com>
	* src/modules.h, src/modules.cc, src/processor.cc,
	src/breakpoints.cc, src/pic-processor.cc, src/hexutils.cc,
	gui/gui_src.cc, gui/gui_src_asm.cc, cli/scan.ll,
	src/cmd_manager.h, cli/cmd_dump.cc:

	-- renamed the enum's for the SIMULATION_MODE(s) (the
	enum 'INITIAL' collides with a macro in flex)
	-- added support for module scripts
	-- If a symbol begins with a period, then the scanner
	will automatically prepend the active processor name.
	(This is a short cut for accessing processor attributes).

2005-05-24 Borut Razem <borut.razem@siol.net>
	* doc/gpsimWin32.html, gpsim/gpsim.vcproj, gpsim/makefile.mingw:
	WIN32 with official release of gtk+extra-2.0.0

2005-05-22 Scott Dattalo <scott@dattalo.com>
	* cli/cmd_break.cc, cli/cmd_break.h, cli/parse.yy, cli/scan.ll,
	src/breakpoints.cc, src/breakpoints.h, src/operator.cc,
	src/trigger.cc, src/trigger.h, src/value.cc:
	Added the capability of associating user defined messages with
	break points.
	Break point expressions (if present) are now displayed when the
	break points are displayed.
	* regression/assertions/Makefile,
	regression/assertions/assertions.asm: Use the coff.inc include
	file supplied with gputils and specifically the macros for
	assertions.

2005-05-21 Scott Dattalo <scott@dattalo.com>
	* cli/cmd_break.h, cli/cmd_break.cc, cli/input.cc, cli/parse.yy,
	src/cod.cc, src/breakpoints.cc: Execution breakpoints were failing
	to propogate execute() if an attached expression evaluated false.
	Added support for gpasm style assertions.
	* cli/scan.ll: Shell command escape character ('!') was
	conflicting with the not operator.
	* regression/assertions/assertions.asm,
	regression/assertions/Makefile, regression/assertions/16f873.lkr:
	Added a regression test for gpasm assertions.

2005-05-20 Scott Dattalo <scott@dattalo.com>
	* cli/scan.ll, regression/run_regression.sh,
	regression/macro_test/macro_test.stc:  Macros can now be nested.

2005-05-20 Scott Dattalo <scott@dattalo.com>
	* gui/gui_profile.cc: ifdef'd out code that a) is seldom (never?)
	used and b) incompatible with the latest official release of
	gtkextra.

2005-05-19 Scott Dattalo <scott@dattalo.com>
	* src/ttoken.h, src/ttoken.cc, src/bytelog.cc, src/bytelog.h,
	src/pthread-wrap.h: Create a gpsim namespace and place the objects
	in these files in there.
	* cli/scan.ll: removed some printf debugging junk.

2005-05-19 Scott Dattalo <scott@dattalo.com>
	* cli/scan.ll, cli/cmd_macro.cc, cli/parse.yy, cli/input.cc:
	A recent change in string processing broke macros. Also, began
	adding code to support nested macros.
	* regression/macro_test/macro_test.asm,
	regression/macro_test/macro_test.stc: Added new regression test
	for macros.

2005-05-18 Scott Dattalo <scott@dattalo.com>
	* cli/scan.ll: Fixed end-of-line scan bug introduced on 5-16.

2005-05-16 J.R. Heisey <jrheisey@sourceforge.com>
	* src/os_dependent.cc: Added debug code to allow alternate
	directory paths for module libraries so I can specify debug
	build locations for shared libraries.
	* src/program_files.cc: Fixed bug caused by symbol table not
	being cleared when Program files are loaded.
	* src/modules.cc: Fixed bug when a module library failed to
	load it was still being added to the installed library list.
	* configure.ac: bumped build number to 0.21.5

2005-05-16 Scott Dattalo <scott@dattalo.com>
	* cli/input.cc, cli/scan.h, cli/scan.ll, cli/input.cc: command
	assertions where causing parse errors.

2005-05-14 Scott Dattalo <scott@dattalo.com>
	* cli/cmd_processor.cc: The processor command wasn't working
	because of a typo in an if statement.
	* cli/parse.yy, cli/cmd_break.cc, cli/cmd_break.h: Added 'break
	#number' to allow inspection of an individual break point. Clean
	up some memory management.
	* src/breakpoints.cc: 'dump1()' wasn't checking to see if the
	break point number was valid.
	* src/os_dependent.cc: non-windows file extension comparisons were
	not working.
	* src/pic-processor.cc, src/symbol.h, src/symbol.cc, src/value.cc:
	val_symbols like the PIC program counter can now be parts of gpsim
	expressions.
	* src/cod.cc: hack - line number offset errof.
	* doc/gpsim.lyx: Updated the documentation.

2005-05-12 Scott Dattalo <scott@dattalo.com>
	* gui/gui_regwin.cc, gui/gui_src_opcode.cc, gui/gui_src_asm.cc:
	Removed calls to GTKWAIT because they sometimes block in the newer
	version (2.6.7) of GTK. Thanks to Micah Carrick for pin-pointing
	this one.

2005-05-11 Scott Dattalo <scott@dattalo.com>
	* src/sim_context.cc: The included file "direct.h" does not exist
	on FC3.

2005-05-10 J.R. Heisey <jrheisey@sourceforge.com>
	* cli/cmd_load.cc: Updated on line help for load command.
	* gui/gui_src_asm.cc: Removed a call to gtk_widget_destory()
	in SourcePage::Close() where it was causing a crash in Windows.
	* cli/scan.ll: Defined literal string values to be quoted. This
	was done so that quoted Windows paths in the load command to
	accommodate colons for drive designation and backslashes for
	folder delimiters.
	* gpsim/main.cc: Added the gpsim.exe startup folder to the
	module/library search path.
	* src/sim_context.cc, src/errors.h: Added an error message to CSimulationContext::
	LoadProgram().
	* cli/cmd_module.cc, src/modules.cc, src/modules.h,
	src/os_dependent.cc, gpsim/main.cc: Added code to not load
	a module library that is already loaded.

2005-05-06 J.R. Heisey <jrheisey@sourceforge.com>
	* gui/gui_regwin.cc:  Fixed crash that occurs when RAM register
	count is not a multiple of 16.
	* plat/win32/gpsim.def: Added new function reference.
	* src/processor.cc:  Fixed broken list command
	* src/sim_context.cc: Fixed broken register output on stepping
	that broken on previous check in. Test for open file failure.
	* src/program_files.h: Add new error code.

2005-05-05 J.R. Heisey <jrheisey@sourceforge.com>
	* cli/cmd_break.cc, cli/cmd_disasm.cc, cli/cmd_dump.cc,
	cli/cmd_frequency.cc, cli/cmd_list.cc, cli/cmd_load.cc,
	cli/cmd_load.h, cli/cmd_log.cc, cli/cmd_processor.cc,
	cli/cmd_reset.cc, cli/cmd_step.cc, cli/cmd_x.cc, cli/command.cc,
	cli/command.h, cli/input.cc, cli/input.h, cli/parse.yy,
	src/cod.cc, src/cod.h, src/hexutils.cc, src/Makefile.am,
	src/modules.h, src/os_dependent.cc, src/pic-processor.cc,
	src/pic-processor.h, src/processor.cc, src/processor.h,
	src/program_files.cc, src/program_files.h, src/sim_context.cc,
	src/sim_context.h, src/src.vcproj, src/symbol.cc, src/symbol.h,
	config_win32.h.in, configure.ac, plat/win32/gpsim.def,
	gui/gui_menu.cc, gui/gui_src_asm.cc, gui/gui_statusbar.cc,
	gpsim/Makefile.am:
	- Replaced the cli and gui references to hexfiles verses
	cod file with program files. Gpsim will now figure out
	the file type and load the file.
	- Both the gui and cli will recoginze command files by the stc
	file extension. All other files are assumed to be program files.
	- The c, h and s load options of the load command will be accepted
	for backwards compatibility of existing command files but are no
	longer needed.
	- The processor command is not optional. If the program file
	contains the information about the processor type, gpsim will
	allocate the processor type based on the program file information.
	Using the processor command overrides this behavior.

2005-05-01 Borut Razem <borut.razem@siol.net>
	* plat/win32/gpsim.def: MSVC sync

2005-04-29 Scott Dattalo <scott@dattalo.com>
	* HISTORY, README, INSTALL, configure.ac, gpsim.spec.in: Updates
	for the 0.21.4
	* extras/lcd/ChangeLog, Makefile.am, configure.in: bumped the Rev
	of the LCD module to 0.2.4

2005-04-29 Scott Dattalo <scott@dattalo.com>
	* src/breakpoints.cc: Register assertions were not halting
	simulation when assertion was true.

2005-04-26 Scott Dattalo <scott@dattalo.com>
	* cli/Makefile.am, examples/14bit/Makefile.am: Updated so that
	'make dist' would work again.
	* src/attributes.cc, src/init.cc: Moved attribute initialization
	from init.cc to attributes.cc
	* src/breakpoints.cc, src/symbol.cc, src/symbol.h, src/trigger.cc:
	Complex expressions are now fully supported. Updated the help info
	for the break command to reflect the new syntax (more work
	needed).

2005-04-26 Scott Dattalo <scott@dattalo.com>
	* src/breakpoints.cc, src/breakpoints.h, cli/parse.yy,
	cli/cmd_break.cc, cli/cmd_break.h: continuing with complex break
	expressions.

2005-04-25 Scott Dattalo <scott@dattalo.com>
	* src/trigger.h, src/trigger.cc, src/breakpoints.cc: Added complex
	expressions to the TriggerObject class. (not complete)

2005-04-23 Borut Razem <borut.razem@siol.net>
	* src/bitlog.cc, src/bytelog.cc, src/ttoken.cc: removed #define IN_MODULE
	* plat/win32/gpsim.def, modules/makefile.mingw, src/makefile.mingw,
	modules/modules.vcproj, src/src.vcproj: MINGW sync
	* gpsim/makefile.mingw: force linker to onclude BoolEventLogger class
	methods in gpsim.exe, so that they can be referenced by modules
	* src/modules.cc (get_attribute): fixed attribute name comparison
	* src/sim_context.h: added end of line at end of file
	* plat/win32/gpsim.nsi: remove pthreadVC1.dll

2005-04-22 Scott Dattalo <scott@dattalo.com>
	* bitlog.cc, bitlog.h, bytelog.cc, bytelog.h, ttoken.cc, ttoken.h,
	pthread-wrap.h: moved these from the modules/ directory into the
	src/ directory.

2005-04-19 J.R. Heisey <jrheisey@sourceforge.com>
	* src/breakpoints.cc, src/processor.cc, src/processor.h:
	Fixed corruption when clearing a Breakpoint_Instruction object.
	The object was not removed properly from the chain of instruction
	objects in the pma.

2005-04-19 Scott Dattalo <scott@dattalo.com>
	* src/os_dependent.cc: Added 'errno.h' to the list of include
	files. (without this, os_dependent.cc wouldn't compile on
	FC3-64bit).

2005-04-19 Scott Dattalo <scott@dattalo.com>
	* src/symbol.cc, src/symbol.h: Fixed reference to symbol table
	that was preventing compilation on Linux.

2005-04-19 J.R. Heisey <jrheisey@sourceforge.com>
	*  gui/gui_src_asm.cc, gui/gui_statusbar.cc, gui/gui_statusbar.h:
	Modified the statusbar so that it can handle a switch from
	one processor to another.
	* src/sim_context.cc, src/symbol.cc,h: Fixed a crash on gpsim
	exit.
	* src/os_dependent.c: added test in load_library() to the first
	call to sLoad() to determine whether the a failure was due
	to the library file not found or some other error. This needs
	to be completed for the linux builds.

2005-04-18 Scott Dattalo <scott@dattalo.com>
	* src/stimuli.cc: Stimulus_Node destructor now removes itself from
	the symbol table.

2005-04-17 Scott Dattalo <scott@dattalo.com>
	* src/stimuli.h, src/stimuli.cc: Added methods to control the
	resistance and voltage of the IO_bi_directional_pu pullup resistor.

2005-04-16 Scott Dattalo <scott@dattalo.com>
	* src/symbol.cc: set methods for register symbol now initialize
	the "init" field in the register object.

2005-04-16 J.R. Heisey <jrheisey@sourceforge.com>
	* src/value.cc,h, src/symbol.cc,h, src/processor.cc,h,
	src/pic-processor.cc,h, makefile.mingw, Makefile.am,
	cli/input.cc, cli/init.cc, gui/gui_symbols.cc, gui/gui_stack.cc,
	gui/gui_src_asm.cc, gui/gui_profile.cc, src/gpsim_time.cc,
	plat/win32/gpsim.def, src/cod.cc, cli/cmd_processor.cc,
	added src/sim_context.cc.h: Restructured classes in preparation
	for allowing a simulation context to be reset for a new processor
	with out having to close the program and with out memory leaks.
	The new class CSimulationContext, implemented as a singleton for
	now, owns a CProcessorList. The singelton class
	ProcessorContructorList is used to create processor objects.
	Eventually CSimulationContext may own Breakpoints, Symbol_Table
	and the active_cpu objects. For now. there are accessor functions
	to get to the global objects. CSimulationContext.set_processor()
	will check for a matching processor in the processor list before
	allocating a new processor.
	Processor related classes now delete the objects that they own
	on destruction. May not be conprehensive. set_processor() currently
	deletes a matching processor object rather than reinitializing it
	for a new simulation session.

2005-04-15 Scott Dattalo <scott@dattalo.com>
	* cli/command.h, cli/input.cc, cli/parse.yy, cli/scan.ll,
	gpsim/main.cc: Finished support for reentrant parsing.
	* cli/cmd_disasm.cc: Cleaned up a buglet in printing.
	* src/attributes.cc, src/attributes.h, src/pic-processor.cc,
	src/processor.cc, src/processor.h: Added an attribute that
	controls the behavior of simulator when a reset is encountered.

2005-04-15 Scott Dattalo <scott@dattalo.com>
	* src/cod.cc, cli/cmd_run.cc, cli/cmd_run.h, cli/input.cc,
	cli/input.h, cli/parse.yy, cli/scan.ll:
	Added initial support for .COD file assertions.
	  -- Parser is now reentrant
	  -- gpsim's CLI interface is now a registered interface
	     that can be referenced and accessed by the simulation
	     engine.
	* src/ioports.cc: experimental tinkering

2005-04-14 Scott Dattalo <scott@dattalo.com>
	* build.xml: configure was not getting invoked.

2005-04-14 Scott Dattalo <scott@dattalo.com>
	* build.xml: autoconf was not getting invoked...

2005-04-13 Scott Dattalo <scott@dattalo.com>
	* build.xml: An XML script for an experimental regression tool
	(based on the open source projects "ant" and "CruiseControl").

2005-04-09 Borut Razem <borut.razem@siol.net>
	* cli/makefile.mingw, src/makefile.mingw: MINGW sync

2005-04-08 J.R. Heisey <jrheisey@sourceforge.com>
	* src/breakpoints.cc, src/cmd_manager.cc,h, gpsim/main.cc,
	src/processor.cc,h, cli/ui_gpsim.cc,h, src/registers.cc,
	cli.vcproj, gpsim.vcproj, src.vcproj: Created a IUserInterface
	and CGpsimUserInterface as the implementation with functions to
	write predefined parameterized strings to the console (or in the
	future a GUI popup).
	Modules call the C function GetUserInterface() to retrieve an
	instance of CGpsimUserInterface as a IUserInterface.
	Using IUserInterface functions is the prefered way of writing error
	and notification messages to the gpsim console from other modules.

2005-04-08 Scott Dattalo <scott@dattalo.com>
	* cli/parse.yy, cli/cmd_break.h: Added support for a break command
	like:
	    break r|w reg(N)
	Where N is an integer and 'reg' is the new reg operator.

2005-04-08 Scott Dattalo <scott@dattalo.com>
	* cli/parse.yy, cli/scan.ll: Added a "reg()" operator that can cast
	integers into registers (although this is not fully implemented
	yet).
	A single quote before an identifier now acts as an 'escape'
	character. This allows user defined strings to collide with gpsim
	built in strings. (e.g. If a user has a variable named help, its
	contents can be examined by typing 'help at the command line).

2005-04-07 J.R. Heisey <jrheisey@sourceforge.com>
	src/breakpoints.cc: Fixed a memory leak by properly removing
	chained BreakpointRegister objects from the Register chain when
	clearing a break object. When the chain is properly maintained
	the object may be deleted.

2005-04-07 J.R. Heisey <jrheisey@sourceforge.com>
	* cli/scan.ll, cli/parse.yy, cli/cmd_break.cc,h,
	src/processor.cc,h, src/pic-processor.cc, operator.cc,h,
	src/breakpoints.cc: Changed the break command syntax.
	Added code to support the syntax.

2005-04-07 Scott Dattalo <scott@dattalo.com>
	* cli/cmd_manager.h, cli/cmd_manager.cc, cli/cmd_gpsim.h:
	moved from cli/ to src/
	* src/processor.cc, src/Makefile.am, src/interface.cc,
	src/processor.cc, gpsim/main.cc, cli/Makefile.am,
	cli/cmd_manager.cc, cli/cmd_module.cc, cli/cmd_shell.cc:
	Updated these files to use the newly relocated .h files. The reason
	for doing this is to fix a src/ dependency on cli/ files. When
	src/ depends on cli/ then any module that links against the gpsim
	library must also link against the cli library.
	* src/registers.cc: added a Bit class (currently not used though)
	* src/symbol.cc: attribute symbols that wrap other symbols now change
	the name of the wrapped symbol. This allows heirarchical names
	such as processor_name.attribute to appear in the symbol table.

2005-04-06 J.R. Heisey <jrheisey@sourceforge.com>
	* src/processor.cc.h: Two new break message functions.

2005-04-05 J.R. Heisey <jrheisey@sourceforge.com>
	* src/value.h, src/registers.cc,h, src/processor.cc.h,
	src/preakpoints.cc,h, plat/win32/gpsim.def: Implemented
	classes and functions for displaying the register address
	and possible value for break on read and break on write.

2005-04-05 J.R. Heisey <jrheisey@sourceforge.com>
	* gpsim/main.cc, src/interface.cc, src/gpsim_interface.h,
	cli/cmd_manager.h: Added code to support for an external module to
	access the global ISimConsole object from the Interface class.

2005-04-04 J.R. Heisey <jrheisey@sourceforge.com>
	* src/processor.cc,h: Added the function Processor::IsAddressInRange().
	Use IsAddressInRange() in ProgramMemoryAccess::get_src_line() and
	ProgramMemoryAccess::operator [](unsigned int address)

2005-04-02 Scott Dattalo <scott@dattalo.com>
	* src/processor.cpp: Reverted the change J.R. made on 2005-03-31
	because it breaks the gui for the 18F family of PICs. We'll need
	to come up with another way of solving the initial PC value
	problem.

2005-03-31 J.R. Heisey <jrheisey@sourceforge.com>
	* src/processor.cpp: Changed call ProgramCounter->get_PC() to
	ProgramCounter->get_value() to fix a problem where the initial
	position of the PC in the source was not getting set properly.
	Return value is used for indexing into source code line.
	Mostly used by the UI so should not affect behavior.

2005-03-30 J.R. Heisey <jrheisey@sourceforge.com>
	* cli/cmd_dump.cc: Changed ram dump command to handle ram sizes
	greater than one byte.
	* cli/cmd_x.cc: Removed call to dump.dump(DUMP_SFRS) since previous
	call to dump.dump(DUMP_RAM) already dump thes sfrs too.ram halt.
	* Cleaned up a couple of GUI error messages. (invalid window handle,
	invalid value strings)

2005-03-24 J.R. Heisey <jrheisey@sourceforge.com>
	* src/breakpoints.cc, src/processor.cc, h, cli/cmd_clear.cc:
	Fixed crash in Breakpoints::clear() that I reintroduced in my last checkin.
	Also Fixed the original memory leak by properly removing chained
	Breakpoint_Instruction objects from the instruction chain when clearing a
	break object. When the chain is properly maintained the object may be
	deleted. Perhaps this should be a temporary fix until a base class
	for Breakpoint_Instruction all have a replaced member.

2005-03-23 Scott Dattalo <scott@dattalo.com>
	* gui/gui_src_asm.cc: changed the comment text color to 'dim gray'

2005-03-23 Scott Dattalo <scott@dattalo.com>
	* src/value.cc: Fixed write to a null pointer in String::get(char
	*buf, int len).
	* src/symbol.cc: Fixed infinite loop in
	char *register_symbol::name (char *buf, int len).
	* regression/ccp/ccp.asm: added more features to the ccp
	regression test.

2005-03-22 J.R. Heisey <jrheisey@sourceforge.com>
	* gui/gui_watch.cc: Fixed problem with register values > 127 causing pango runtime warnings

2005-03-21 J.R. Heisey <jrheisey@sourceforge.com>
	* src/breakpoints.cc, src/processor.h: created a notification
	to Processor when breakpoints are set or cleared. Cleaned up
	code in breakpoints.cc.

2005-03-23 Scott Dattalo <scott@dattalo.com>
	* src/16bit-instructions.cc: The NEGF instruction for the 18f
	family was erroneously writing the negated result to W.
	* regression/instructions_16bit/instructions_16bit.asm: added a
	regression test for the NEGF instruction.

2005-03-21 J.R. Heisey <jrheisey@sourceforge.com>
	* src/processor.cc: Copy a null string to input parameter
	Processor::get(char *cP, int len) because not value is
	associate with a Processor object. Fixes trace errors from
	pango when the symbol window is scrolled to some symbol objects.
	* src/value.cc: Copy a null string to input parameter
	String::get(char *buf, int len) when not value string is
	allocated. Fixes trace errors from pango when symbol window
	is scrolled to some symbol objects.

2005-03-18 J.R. Heisey <jrheisey@sourceforge.com>
	* cli/cmd_load.cc/h, src/cod.cc/h, cli/input.cc, cli/parse.yy:
	added error checking for opening cod, hex and stc files.
	Particularily when opened from the GUI.

2005-03-17 Scott Dattalo <scott@dattalo.com>
	* src/stimuli.cc: tweaking of I/O thresholds.

2005-03-16 Scott Dattalo <scott@dattalo.com>
	* cli/scan.ll, src/stimuli.h, src/stimuli.cc, src/symbol.cc,
	src/symbol.h: Added/enhanced methods for searching, adding, and
	removing symbols and stimuli.

2005-03-14 J.R. Heisey <jrheisey@sourceforge.com>
	* src/modules.h, modules.cc, os_dependent.cc: Elimaticated
	undesired error message on failure to load a function of a
	module.
	Simplified Module_Library() constructor to use os independent
	api call get_library_export()

2005-03-14 Scott Dattalo <scott@dattalo.com>
	* plat/win32/gpsim.def: MSVC sync.
	* modules/modules.vcproj: Use new pthread library.
	* gui/gui_register.h, gui/gui_regwin.cc: pass registerValue by
	value in getValueAsString() method.

2005-03-03 Borut Razem <borut.razem@siol.net>
	* plat/win32/gpsim.def: MSVC sync

2005-03-10 Scott Dattalo <scott@dattalo.com>
	* src/stimuli.cc: Added an 'X' state to getBitChar method
	of the IO_open_collector class.

2005-03-09 Borut Razem <borut.razem@siol.net>
	* modules/makefile.mingw: pthreads upgrade

2005-03-08 Scott Dattalo <scott@dattalo.com>
	* src/value.cc, gui/gui_profile.cc, gui/gui_statusbar.cc,
	gui/gui_trace.cc: Corrected temporary hack regarding PRINTF_INT64_MODIFIER

2005-03-08 Borut Razem <borut.razem@siol.net>
	* plat/win32/gpsim.nsi: removed examples\14bit\*.inc
	* cli/cmd_manager.h: added newline at the end of file
	* doc/gpsimWin32.html: atk upgraded to 1.8.0

2005-03-08 Scott Dattalo <scott@dattalo.com>
	* regression/ccp/ccp.asm: improvements to ccp regression test
	* gui/gui_profile.cc, gui/gui_trace.cc, gui/gui_statusbar.cc,
	src/value.cc: Temporarily removed windows-specific macro.
	* src/stimulus.cc, src/stimuli.h: Cleaned up asynchronous stimuli
	* src/registers.h, src/ssp.cc, src/ioports.cc, src/14bit-tmrs.cc:
	Made the default register class access functions all go through
	one function to obtain a register's value.

2005-02-26 Scott Dattalo <scott@dattalo.com>
	* src/processor.h, src/trace.h, src/breakpoints.h, src/symbol.h,
	src/gpsim_interface.h, src/gpsim_time.h:
	The external references demarcated by 'IN_MODULE' were not getting
	resolved in FC3. Since these were introduced to resolve a linking
	problem with WIN32 DLL's, I made the demarcation dependent on only
	Windows.

2005-02-25 Scott Dattalo <scott@dattalo.com>
	* src/stimuli.h, src/stimuli.cc: Added methods to the IOPIN class
	to differentiate between a pin driving a node and one being driven
	by a node.
	* src/14bit-tmrs.cc, src/i2c-ee.cc, src/packages.cc, src/ssp.cc,
	src/stimuli.cc, src/stimuli.h, src/uart.cc, extras/lcd/lcd.cc,
	gui/gui_breadboard.cc, modules/logic.cc, modules/logic.h,
	modules/usart.cc, modules/video.cc, modules/video.h: Propogate
	IOPIN change to all consumers.

2005-02-24 Scott Dattalo <scott@dattalo.com>
	* src/stimuli.h, src/stimuli.cc: Added impedance thresholds
	to differentiate strong, weak, and floating drivers.

2005-02-16 Scott Dattalo <scott@dattalo.com>
	* src/ioports.cc: experiments in ioport redesign.

2005-02-16 Scott Dattalo <scott@dattalo.com>
	* src/stimuli.h, src/stimuli.cc: Added 'getBitChar()' method to
	the open collector stimulus class.

2005-02-15 Scott Dattalo <scott@dattalo.com>
	* src/ioports.cc, src/ioports.h: Added a 'getIO' method to the
	IOPIN class that will allow an individual I/O pin in a port to be
	accessed.
	* src/stimuli.h, src/stimuli.cc: Add more state information to the
	snode class. Also, added the 'getBitChar()' method that will
	return the state of the stimulus in the form of an ASCII character
	(e.g. 0,1,Z,W).

2005-02-11 Scott Dattalo <scott@dattalo.com>
	* src/os_dependent.cc: Libraries stored in system directories were
	getting ignored.

2005-02-09 Scott Dattalo <scott@dattalo.com>
	* src/Makefile.am: Newly added src file 'os_dependent.cc' was not
	part of the Makefile
	* cli/input.cc, src/os_dependent.cc: abstracted some os dependent
	changes that were recently added

2005-02-01 Scott Dattalo <scott@dattalo.com>
	* src/processor.h, src/processor.cc, src/trace.cc: Added 'Debug()'
	method to processor class and call it whenever a register
	assertion occur.s

2005-01-30 Borut Razem <borut.razem@siol.net>
	* config_win32.h.in, configure_win32.awk: extract version, package and
	  bugreport values from configure.ac

2005-01-26 Scott Dattalo <scott@dattalo.com>
	* configure.ac: repositioned the call to the m4 macro wi_READLINE_LIB
	so that it would run properly.

2005-01-26 Scott Dattalo <scott@dattalo.com>
	* plat/win32/gpsim.def: added more external cross references.
	* module/modules.vcproj: changed from pthreadVC1.lib to
	pthreadVC.lib.

2005-01-23 Scott Dattalo <scott@dattalo.com>
	* configure.ac: Craig Franklin updated gpsim's configure files. It
	turns out there was a tiny bug preventing things to build a
	*second* time (the first time would work fine)
	* src/gpsim_time.h, src/gpsim_time.cc, src/init.cc: The newly
	added and globally instantiated StopWatch class' constructor was
	making calls to the globally instantiated (but not necessarily
	constructed) Symbol_Table class. Now, StopWatch::init() will make
	the calls to the symbol table.

2005-01-21 Borut Razem <borut.razem@siol.net>
	* plat/win32/gpsim.def, src/src.vcproj: MSVC sync
	* doc/gpsimWin32.html: gpsim works with flex 2.4.31

2005-01-20 Scott Dattalo <scott@dattalo.com>
	* src/breakpoints.cc: Trigger actions were not printing
	execution breakpoint messages.
	* src/registers.h, src/registers.cc: Added a skip_start function to
	the program counter.

2005-01-19 Scott Dattalo <scott@dattalo.com>
	* src/registers.cc, src/registers.h, src/gpsim_object.cc,
	  src/gpsim_object.h, src/symbol.cc, src/symbol.h,
	  src/value.cc, src/value.h: Added the 'toBitStr' method
	to gpsim_object and propopogated the change through the
	derived classes. Also, the register class now calls get() to
	obtain the value printed with toString and toBitStr instead
	of directly using its value object.

2005-01-17 Scott Dattalo <scott@dattalo.com>
	* src/gpsim_time.h, src/gpsim_time.cc: Finished the StopWatch
	class.
	* src/value.cc, src/value.h, src/attributes.cc, src/attributes.h:
	Added attribute breakpoints. For attributes that can be associated
	with breakpoints, you can now write 'break attribute' to set a
	breakpoint on that attribute.
	* cli/Makefile.am, cli/cmd_break.cc, cli/cmd_break.h,
	cli/cmd_help.cc, cli/command.cc, cli/parse.yy: The 'stopwatch'
	command is now handled by attributes. Added the following
	attributes:
	stopwatch, stopwatch.enable, stopwatch.direction,
	stopwatch.rollover.
	The 'stopwatch' attribute supports breakpoints, so the 'break
	stopwatch'  command will break whenever the stopwatch rolls over.

2005-01-15 Scott Dattalo <scott@dattalo.com>
	* src/attributes.cc, src/attributes.h: New files to support gpsim
	attributes.
	* src/Makefile.am, src/makefile.mingw: added the new files to the
	make files.

2005-01-14 Scott Dattalo <scott@dattalo.com>
	* gpsim/main.cc, gui/gui_main.cc: The gtk main loop is now started
	even if the command line option --cli is specified. This way, the
	GIOChannels will still operate.

2005-01-13 Scott Dattalo <scott@dattalo.com>
	* cli/sockect.cc, src/value.cc: Added support for 'Socket Sinks'
	and 'Socket Sources'. These essentially are two ways in which a
	client can choose to communicate with gpsim.

2005-01-10 Scott Dattalo <scott@dattalo.com>
	* cli/sockect.cc, src/protocol.cc, src/protocol.h,
	src/symbol.cc, src/symbol.h, src/value.cc,src/value.h:
	Fixed bugs associated with socket notify links.

2005-01-09 Scott Dattalo <scott@dattalo.com>
	* src/ioports.cc: Began I/O port redesign.
	* cli/socket.cc, src/protocol.h: Added Socket callbacks.
	* examples/scripts/client3.cc, examples/scripts/makefile,
	examples/scripts/client_interface.cc,
	examples/scripts/client_interface.h: Added a new client script
	example illustrating socket callbacks.
	* gui/gui_main.cc: removed a printf debug statement.

2005-01-09 Borut Razem <borut.razem@siol.net>
	* plat/win32/gpsim.def: MSVC sync
	* doc/gpsimWin32.html: dependedncy on gawk, ...
	* cli/cli.vcproj, cli/scan.ll: make it work with flex 2.4.31
	* plat/win32/gpsim.nsi, modules/makefile.mingw, modules/modules.vcproj:
	  pthreads 2005-01-03
	* gui/gui_menu.cc: use utf-8 encoded LATIN SMALL LETTER Z WITH CARON
	  instead LATIN SMALL LETTER Z.

2005-01-07 Scott Dattalo <scott@dattalo.com>
	* src/16bit-processors.cc: stop gap hack - added registers
	to hold the places of the analog SFR's
	* cli/socket.cc, src/protocol.h, src/value.cc, src/value.h:
	More socket improvements.

2005-01-05 Scott Dattalo <scott@dattalo.com>
	* src/breakpoints.cc, src/gpsim_classes.h, src/gpsim_interface.h,
	src/interface.cc, src/modules.cc, src/modules.h,
	src/pic-processor.cc, src/protocol.cc, src/protocol.h,
	cli/command.cc, cli/socket.cc:
	Enhancements to support the socket interface. Added a run command
	and a reset command and made them invocable via the interface class.

2005-01-02 Scott Dattalo <scott@dattalo.com>
	* gui/gui_main.cc, cli/input.cc, src/interface.cc: Added function
	'gUseThreads()' and use it to run-time select the usage of threads.

2005-01-02 Borut Razem <borut.razem@siol.net>
	* gui/gui_break.cc, gui/dialog.cc, gui/gui_init.cc, gui/gui_menu.cc,
	  gui/gui_processor.cc, gui/gui_src.cc, gui/gui_src_asm.cc
	  gui/gui_src_opcode.cc: removed unneeded include gtkcombobox.h
	* gui/gui_breadboard.cc: fixed compiler warnings
	* cli/Makefile.am, gui/Makefile.am: added AM_ preffix to CFLAGS,
	  CXXFLAGS, CPPFLAGS and YFLAGS
	* doc/gpsimWin32.html: gtk+ version 2.4.14, XHTML 1.0 Transitional compliant,
	  gtk+extra-2-1.1.0-20050102
	* doc/gpsim_cvs.html: changed first build instructions

2004-12-17 Scott Dattalo <scott@dattalo.com>
	* gui/gui_main.cc, src/interface.cc, cli/socket.cc: removed
	dependencies on GTK 2.0.

2004-12-19 Borut Razem <borut.razem@siol.net>
	* plat/win32/gpsim.nsi: added examples/scripts/client_interface.h
	  to installation
	* mingw/makefile.mingw, gpsim/gpsim.vcproj: added gthread-2.0.lib
	* src/src.vcproj: removed plat\win32\glist.cpp from project; CLI
	  mode now requires linking with full glib library; added src/trigger.cc
	  and src/trigger.h to the project
	* modules/modules.vcproj: pthreads to the project
	* gpsim.sln: removed building of modules in CLI configuration

2004-12-17 Scott Dattalo <scott@dattalo.com>
	* gui/gui_main.cc, src/interface.cc: replaced pthread_* calls and
	declarations with the corresponding GTK ones.

2004-12-17 Scott Dattalo <scott@dattalo.com>
	* gui/gui_main.cc, src/interface.cc: Added experimental code to
	test threading.

2004-12-16 Scott Dattalo <scott@dattalo.com>
	* gui/gui_main.cc, gui/gui_menu.cc: Use the interface instead of
	the cpu pointer to initiate simulation.
	* src/Makefile.am, src/trigger.cc, src/trigger.h,
	src/breakpoints.cc, src/breakpoints.h: Split the
	trigger classes away from the breakpoint classes.
	* src/gpsim_interface.h, src/init.cc, src/interface.cc,
	src/pic-processor.cc, src/protocol.cc, src/protocol.h,
	src/trace.h, cli/cmd_run.cc, cli/cmd_set.cc, cli/cmd_trace.cc,
	cli/input.cc, cli/socket.cc:
	Attempted (but failed) to add a feature that would allow a socket
	interface to send data to the simulator while a simulation is
	running. It turns out that the giochannel stuff used to control
	the socket runs in the gui event loop. The only time the socket is
	handled is whenever the loop can run. However, since gpsim is a
	single threaded application (the gui does spawn its own private
	thread), the gui event loop only runs whenever the simulation
	gives it cpu time. Thus it's not possible for a socket to update
	the simulation except when the gui is being refreshed!
	* examples/scripts/client.cc, examples/scripts/gensquares.asm,
	examples/scripts/makefile, examples/scripts/client2.cc,
	examples/scripts/client_interface.cc,
	examples/scripts/client_interface.h:
	Added a class to encapsulate the gpsim client socket
	interface. Added another example to test socket updates while the
	simulation is running.

2004-12-16 Borut Razem <borut.razem@siol.net>
	* plat/win32/gpsim.def: MSVC sync
	* src/14bit-registers.h: declare void
	  Status_register::put(unsigned int new_value) as virtual, not inline
	* gui/gui_src_opcode.cc: removed definition of unused variable pm_size
	  in method SourceBrowserOpcode_Window::NewProcessor()
	* extras/lcd/makefile.mingw: added
	* plat/win32/gpsim.nsi: added additional files from examples\scripts to
	  the package
	* cli/input.cc: function have_line() is needed also in non GUI mode
	* gui/profile.cc, gui/gui_statusbar.cc, gui/gui_stopwatch.cc,
	  gui/gui_trace.cc, src/14bit-tmrs.cc, src/16bit-registers.cc,
	  src/eeprom.cc, src/i2c-ee.cc, src/interface.cc, src/interface.h,
	  src/ioports.cc, src/p16x7x.cc, src/pic-processor.cc,
	  src/pic-registers.cc, src/ssp.cc, src/stimuli.cc, src/tmr0.cc,
	  src/uart.cc: replace direct access to cycles with a getter
	  function get_cycles()

2004-12-15 Scott Dattalo <scott@dattalo.com>
	* src/init.cc, src/gpsim_time.cc:
	Delayed creation of the cycle counter attribute. It turns out that
	this attribute was created in the Cycle_Counter constructor which
	is called by the globally instantiated 'cycles' object. On
	Windows, this call happened before the symbol table was
	inititialized .

2004-12-14 Scott Dattalo <scott@dattalo.com>
	* src/init.cc: added new function for initialization. Also added
	new attribute 'sim.verbosity' that will control the simulator's
	verbosity. Note, this duplicates the behavior of the global
	variable 'verbose'. However, the goal is to phase out the global
	variable.
	* cli/cmd_run.cc: the run command now examines the new verbosity
	attribute.
	* src/pic-processor.cc, src/pic-processor.h, src/processor.cc,
	src/processor.h: the run member function now takes a parameter
	that controls whether or text will be printed.
	* cli/socket.cc:
	* src/interface.h: added extern def for new init function.
	* gpsim/main.cc: call new initialization function
	* src/breakpoints.cc: removed superfluous carriage return print.
	* examples/scripts/README, examples/scripts/client.cc,
	examples/scripts/makefile:  added  new files to illustrate
	scripting.
	* examples/scripts/gensquares.asm: minor tweak to simplify example
	regression test.

2004-12-14 Scott Dattalo <scott@dattalo.com>
	* cli/scan.ll, cli/socket.cc, src/protocol.cc, src/protocol.h,
	src/value.cc: Fixed compilation issues with FC3 on an Athlon 64.

2004-12-11 Borut Razem <borut.razem@siol.net>
	* src/makefile.mingw, src/src.vcproj: added protocol.cc and protocol.h
	* plat/win32/gpsim.def: MSVC sync

2004-12-10 Scott Dattalo <scott@dattalo.com>
	* src/gpsim_time.cc: Added a "cycles" attribute for interfacing
	with the cycle counter class.
	* src/protocol.cc, src/protocol.h, src/symbol.cc, src/symbol.h,
	src/value.cc, src/value.h, cli/socket.cc:
	More improvements to the protocol stuff.

2004-12-09 Scott Dattalo <scott@dattalo.com>
	* src/protocol.h, src/protocol.cc, src/Makefile.am: New files to
	support a communication protocol for gpsim.
	* cli/socket.cc: moved much of the protocol related stuff to the
	new files.
	* src/value.h, src/value.cc, src/symbol.h, src/symbol.cc: Symbols
	and Values can now be assigned by Packets.
	* src/12bit-instructions.h, src/12bit-processors.h,
	src/14bit-instructions.h, src/14bit-processors.h,
	src/14bit-tmrs.h, src/16bit-processors.h, src/16bit-tmrs.h,
	src/breakpoints.h, src/p12x.h, src/p16f62x.h, src/p16x5x.h,
	src/p16x6x.h, src/p16x8x.h, src/pic-instructions.h,
	src/pic-processor.h, src/processor.h, src/trace.h, src/xref.h:
	fixed typo in GPL disclaimer.

2004-12-07 Scott Dattalo <scott@dattalo.com>
	* cli/socket.cc: More socket clean up
	* src/modules.cc, src/modules.h, src/processor.cc,
	src/processor.h, src/symbol.cc, src/symbol.h: Removed deprecated
	code for setting/getting attributes. Added a new member function
	to the module_symbol that allows a character string to assign
	values to a module (this doesn't do anything yet).

	* modules/resistor.cc, modules/resistor.h, modules/usart.cc,
	modules/usart.h: removed deprecated set_attribute member function.

2004-12-06 Scott Dattalo <scott@dattalo.com>
	* cli/socket.cc: Experimenting with binary data. Cleaned up socket
	link creation. Added a generic symbol read/write socket command.

2004-12-06 Scott Dattalo <scott@dattalo.com>
	* cli/socket.cc: Wrap gtk2.x calls with #defines

2004-12-02 Scott Dattalo <scott@dattalo.com>
	* cli/socket.cc: More additions to SocketLinks. It's now possible
	to tie a socket to a gpsim attribute. This allows an external
	application to directly control gpsim's behavior.

2004-12-02 Scott Dattalo <scott@dattalo.com>
	* src/pic-processor.h, src/pic-processor.cc, src/p16f87x.h,
	src/p16f87x.cc: Added the PIC 16f876

2004-12-01 Scott Dattalo <scott@dattalo.com>
	* cli/socket.cc: Fixed the socket interface for issues related
	to gtk 2.x. Began adding the SockeLink class. This class will
	sit on top of the socket interface and will hide it from the
	clients. The clients will be able to open SocketLinks and connect
	directly to gpsim internal objects.

2004-12-01 Borut Razem <borut.razem@siol.net>
	* plat/win32/gpsim.def: MSVC sync

2004-11-30 Scott Dattalo <scott@dattalo.com>
	* gpsim/gpsim.vcproj: Removed references to files resource.h and
	gpsim.rc.

2004-11-30 Scott Dattalo <scott@dattalo.com>
	* cli/cmd_break.cc, cli/cmd_break.h, cli/cmd_help.cc, cli/cmd_help.h,
	cli/cmd_load.cc, cli/cmd_load.h, cli/cmd_log.cc, cli/cmd_log.h,
	cli/cmd_macro.cc,, cli/cmd_macro.h, cli/cmd_module.cc, cli/cmd_module.h,
	cli/cmd_processor.cc,, cli/cmd_processor.h, cli/cmd_symbol.cc,
	cli/cmd_symbol.h, cli/command.cc, cli/misc.h, cli/parse.yy, cli/scan.ll:
	Changed the parser token STRING to LITERAL_STRING_T. The reason for
	this is to allow string type attributes to be treated like numeric
	attributes.
	* src/pic-processor.cc, src/pic-processor.h, src/processor.cc,
	src/processor.h, src/symbol.cc, src/symbol.h, src/value.cc,
	src/value.h:
	- Enhanced the 'String' class so that 1) it uses char * instead
	of STL string (yes this IS an enhancement) 2) the set() and get()
	methods can read and write to the String class.
	- Changed many instances of 'char *' to 'const char *'.

2004-11-29 Scott Dattalo <scott@dattalo.com>
	* src/pic-processor.cc, src/processor.cc, src/processor.h,
	src/trace.cc, src/value.cc, src/value.h: Change Integer,
	Boolean, and Float classes back to hold values of native types
	(as opposed to holding pointers to the native types).
	* modules/video.cc: changed reference to cpu->frequency to
	cpu->set_frequency

2004-11-29 Scott Dattalo <scott@dattalo.com>
	* cli/cmd_stimulus.cc: register stim were not getting started.
	* regression/register_stim/register_stim.[asm|stc],
	regression/run_regression.sh:
	Added a regression test for register stimuli.

2004-11-29 Scott Dattalo <scott@dattalo.com>
	* src/stimuli.h, src/stimuli.cc, src/value.cc, src/value.h: Redesigned
	the 'asynchronous_stimulus' to be a 'ValueStimulus'.
	Added a new stimulus type: AttributeStimulus. An attribute stimulus
	is a stimulus that can be tied directly to some attribute. For example,
	a register symbol is a type of attribute. So an attribute stimulus
	can be tied to a register symbol to create a 'register stimulus'.
	* cli/cmd_stimulus.cc, cli/command.cc, cli/parse.yy: Added support
	for attribute stimuli.

2004-11-28 Borut Razem <borut.razem@siol.net>
	* plat/win32/gpsim.def: MSVC sync

2004-11-24 Scott Dattalo <scott@dattalo.com>
	* src/processor.cc: operator[] for FileContext was not checking
	negative indices.

2004-11-24 Scott Dattalo <scott@dattalo.com>
	* cli/input.cc: yet another attempt to fix tab completion.
	* modules/binary_indicator.cc, modules/binary_indicator.h
	modules/bitlog.h, modules/led.h, modules/logic.cc, modules/logic.h,
	modules/paraface.h, modules/resistor.cc, modules/video.cc,
	modules/video.h: Changed IO_input to IOPIN for all pins. This
	is an attempt to remove a warning message regarding IO_input that
	is generated while building under CygWin.
	* modules/makefile.mingw, plat/win32/gpsim.nsi: Renamed modules.dll
	to a slightly more descriptive gpsim_modules.dll
	* src/i2c-ee.cc, src/p12.cc, src/p16f62x.cc, src/p17c75x.cc,
	src/stimuli.h: exchanged references to IO_input to IOPIN.

2004-11-23 Scott Dattalo <scott@dattalo.com>
	* plat/win32/gpsim.def, modules/modules.vcproj: MSVC sync
	* modules/*.cc: removed (char *) casts in calls to new_name()
	* gpsim/main.cc: removed some unnecessary includes.
	* gpsim/gpsim.vcproj: MSVC sync
	* cli/input.cc: removed some debug stuff
	* cli/cmd_log.cc: removed unreferenced variable.

2004-11-23 Borut Razem <borut.razem@siol.net>
	* plat/win32/gpsim.def, modules/modules.vcproj: MSVC sync

2004-11-23 Scott Dattalo <scott@dattalo.com>
	* cli/input.cc: The tab completion fix for window's now causes
	a crash on Linux. Sigh. Now both oses are supported (without crashes)

2004-11-23 Scott Dattalo <scott@dattalo.com>
	* cli/input.cc: Fixed tab completion related window's crash
	* gui/gui_symbols.cc: Windows doesn't support strndup()

2004-11-22 Scott Dattalo <scott@dattalo.com>
	* cli/input.cc: buffer overflow in command_generator().
	* src/ioports.cc, src/pic-registers.cc, src/registers.cc,
	src/stimuli.cc: valgrind check - unitialized memory.
	* src/value.h, src/value.cc, src/interface.h, src/symbol.cc,
	src/symbol.h, gui/gui_profile.cc, gui/gui_regwin.cc, gui/gui_regwin.h,
	gui/gui_src.cc, gui/gui_src.h, gui/gui_src_asm.cc, gui/gui_stack.cc,
	gui/gui_symbols.cc, gui/gui_watch.cc, gui/gui_watch.h:
	The gui was accessing the symbol table improperly. A new
	Symbol_Table_Iterator class was created to abstract accesses to the
	symbol table. In addition, get() and set() methods were added to
	the symbol classes that will allow reading/writing symbol values
	using strings.

2004-11-19 Scott Dattalo <scott@dattalo.com>
	* gui/gui_breadboard.cc, gui/gui_regwin.cc, cli/parse.yy: valgrind
	check - fixed some uninitialized memory.

2004-11-19 Scott Dattalo <scott@dattalo.com>
	* gui/gui_breadboard.cc: Don't let modules open a closed breadboard
	window.

2004-11-18 Scott Dattalo <scott@dattalo.com>
	* cli/input.cc: disallow TAB characters under windows since it
	causes a crash most of the time.
	* modules/bitlog.cc, modules/bytelog.cc, modules/ttoken.cc,
	modules/makefile.mingw: These were not getting built under windows.
	* plat/win32/gpsim.nsi: added pthreadVC.dll to gpsim's windows binary
	distribution.
	* doc/gpsimWin32.html: Updated documentation for pthreads.

2004-11-17 Scott Dattalo <scott@dattalo.com>
	* src/processor.cc, src/value.cc, src/value.h: made Integer,Float
	and Boolean values get() and set() their values through just one
	member function. This allows derived attributes to trap reads and
	writes to the values.

2004-11-16 Scott Dattalo <scott@dattalo.com>
	* src/value.h, src/value.cc, src/processor.h, src/processor.cc,
	src/pic-processor.cc, src/symbol.h, src/symbol.cc: Added 3 new
	attributes: SafeMode, WarnMode, and UnknownMode to control the
	simulator's behavior under certain simulation conditions. Attribute
	handling has also been enhanced.
	* cli/parse.yy, cli/cmd_help.cc, cli/cmd_help.h: Help command
	will display information about attributes.

2004-11-15 Scott Dattalo <scott@dattalo.com>
	* src/ioports.h, src/ioports.cc, src/16bit-registers.cc: Beginning
	to redesign I/O ports.

2004-11-14 Scott Dattalo <scott@dattalo.com>
	* src/i2c-ee.cc, src/ioports.cc, src/ioports.h, src/stimuli.cc,
	src/uart.cc: The usart has bitrotted. The relatively recent I/O pin
	changes broke this and probably other peripherals too.
	* modules/Makefile.am: added new files.
	* modules/pthread-wrap.h, modules/ttoken.cc, modules/ttoken.h:
	The token class provides co-routine support for modules.
	* modules/bitlog.cc, modules/bitlog.h, modules/bytelog.cc,
	modules/bytelog.h: Bit and Byte event loggers. bitlog was originally
	part of the uart module.
	* modules/usart.cc, modules/usart.h: removed the bit logger class and
	am now making an attempt to resurrect this code.

2004-11-10 Scott Dattalo <scott@dattalo.com>
	* cmd/cmd_break.cc: updated the help description for 'break'
	* src/operator.cc, src/symbol.h, src/symbol.cc: Allow registers
	to be type-cast into integers.

2004-11-10 Scott Dattalo <scott@dattalo.com>
	* gui/gui_breadboard.cc:
	* src/breakpoints.cc, src/gpsim_object.cc, src/gpsim_object.h,
	src/modules.cc, src/processor.cc, src/registers.cc, src/registers.h,
	src/symbol.cc, src/symbol.h:
	- More attribute enhancements
	- added a module load capability that uses attributes.

2004-11-08 Scott Dattalo <scott@dattalo.com>
	* cli/cmd_attach.h, cli/cmd_load.cc, cli/cmd_symbol.cc,
	cli/cmd_symbol.h, cli/command.cc, cli/parse.yy, cli/scan.ll
	cli/socket.cc: More attibute updates
	* gui/gui_breadboard.cc, gui/gui_menu.cc, gui/gui_object.cc,
	gui/gui_profile.cc, gui/gui_regwin.cc, gui/gui_src_asm.cc,
	gui/gui_stack.cc, gui/gui_statusbar.cc, gui/gui_symbols.cc:
	- Removed debugging printfs.
	- Changed attribute handling.
	* src/cod.cc, src/expr.cc, src/expr.h, src/gpsim_object.cc,
	src/modules.cc, src/p16x8x.cc, src/pic-processor.cc, src/processor.cc
	src/stimuli.cc, src/stimuli.h, src/symbol.cc, src/symbol.h,
	src/tmr0.cc, src/value.cc, src/value.h:
	- Removed debugging statements
	- Added the attribute_symbol class.
	- Added more methods to the derived symbol classes to handle type
	casting.

2004-11-07 Borut Razem <borut.razem@siol.net>
	* plat/win32/gpsim.def, plat/win32/gpsim.nsi, src/makefile.mingw,
	  src/src.vcproj: MSVC sync
	* doc/gpsimWin32.html: updated glib version to 2.4.7, gtk+ version to 2.4.13

2004-11-06 Scott Dattalo <scott@dattalo.com>
	* cli/socket.cc, gui/gui_profile.cc, gui/gui_stack.cc,
	gui/gui_symbol.cc, src/symbol.cc, src/symbol.h, src/value.cc
	src/value.h:
	gpsim symbols now support more of the methods of the Value class.

2004-11-05 Scott Dattalo <scott@dattalo.com>
	* cli/cmd_clear.cc, cli/cmd_disasm.cc, cli/cmd_set.cc
	cli/command.cc, cli/scan.ll, gui/gui_breadboard.cc, src/errors.cc
	src/expr.cc, src/operator.cc, src/value.cc, src/value.h:
	Cleaned up the Value class.

2004-11-05 Scott Dattalo <scott@dattalo.com>
	* src/attribute.h, src/attribute.cc, Makefile.am: Removed attribute.*
	from gpsim. The class 'Value' has replaced it.

2004-11-04 Scott Dattalo <scott@dattalo.com>
	* cli/cmd_break.cc, cli/cmd_log.cc, cli/cmd_symbol.cc, cli/cmd_x.cc,
	src/attribute.cc, src/cod.cc, src/expr.cc, src/gpsim_classes.h,
	src/modules.cc, src/modules.h, src/p12x.cc, src/p16f62x.cc,
	src/p16x5x.cc, src/p16x6x.cc, src/p16x7x.cc, src/p16x8x.cc,
	src/p18x.cc, src/pic-instructions.cc, src/pic-processor.cc,
	src/processor.h, src/symbol.cc, src/symbol.h, src/value.cc,
	src/value.h:
	- Rearranged class heirarchy so that gpsimValue derives from
	gpsimObject instead of Value.
	- Substitued the Value class for those places where the Attribute
	class is used.
	* modules/encoder.cc, modules/led.cc, modules/logic.cc,
	modules/push_button.cc, modules/resistor.cc, modules/switch.cc,
	modules/usart.cc, modules/video.cc

2004-11-04 Scott Dattalo <scott@dattalo.com>
	* regression/create_stc, regression/simulate, src/expr.cc,
	src/symbol.cc, src/symbol.h, src/value.cc:
	Regression tests were failing due to recent parser changes.

2004-11-03 Scott Dattalo <scott@dattalo.com>
	* cli/parse.yy, cli/scan.ll, src/14bit-registers.cc, src/16bit-instructions.cc,
	src/16bit-registers.cc, src/breakpoints.cc, src/breakpoints.h, src/expr.cc,
	src/expr.h, src/icd.cc, src/modules.cc, src/operator.cc, src/operator.h,
	src/p16x7x.cc, src/pic-instructions.cc, src/pic-instructions.h,
	src/pic-registers.cc, src/registers.cc, src/symbol.cc, src/symbol.h,
	src/value.cc, src/value.h:
	Added command line assignments. Now you can write stuff like:
	  temp1 = temp2 << 4
	where temp1 and temp2 are two registers.

2004-11-02 Scott Dattalo <scott@dattalo.com>
	* src/attribute.cc, src/attribute.h, src/modules.cc, src/modules.h:
	cleaned up include dependencies.

2004-11-02 Scott Dattalo <scott@dattalo.com>
	* src/gpsim_time.cc, src/gpsim_time.h: Fixed a bug with clearing
	cycle counter break points.

2004-11-01 Scott Dattalo <scott@dattalo.com>
	* src/gpsim_time.cc, src/gpsim_time.h, src/breakpoints.cc, src/ioports.h,
	src/ioports.cc, src/stimuli.cc, src/tmr0.cc: Interrupts, tmr0 and
	I/O pins were all broken in some way.
	* regression/interrupts_14bit.asm, regression/interrupts_14bit.stc:
	Added regression test for the midrange devices

2004-10-29 Scott Dattalo <scott@dattalo.com>
	* src/gpsim_time.cc, src/gpsim_time.h: Cycle counter debugging.

2004-10-20 Scott Dattalo <scott@dattalo.com>
	* src/16bit-instructions.cc: Fixed bug in DECF instruction.
	* regression/instructions_16bit/instructions_16bit.asm: Added
	decf instruction to the regression test.

2004-10-20 Scott Dattalo <scott@dattalo.com>
	* src/ioports.cc, src/ioports.h, src/stimuli.cc, src/stimuli.h:
	PORTB pullups updated.
	Added an overloaded update() member to Stimulus_Node that doesn't
	require time as an input (we never used it anyway).

2004-10-19 Scott Dattalo <scott@dattalo.com>
	* src/stimuli.h, src/stimuli.cc, src/ioports.cc, src/i2c-ee.cc:
	Optimized I/O port stimulus updates.

2004-10-19 Scott Dattalo <scott@dattalo.com>
	* src/stimuli.h, src/stimuli.cc: Began adding capitance modelling
	to stimuli.

2004-10-18 Scott Dattalo <scott@dattalo.com>
	* src/gpsim_classes.h, src/registers.h: Added EXTERNAL_RESET and
	BOD_RESET types.

2004-10-17 Borut Razem <borut.razem@siol.net>
	* plat/win32/gpsim.def: MSVC sync
	* src/symbol.cc: fixed gpsim crash on WIN32 in remove_module()

2004-10-13 Scott Dattalo <scott@dattalo.com>
	* src/cod.cc: Applied patch from Craig Franklin that adds support
	for reading .cod file message area.

2004-10-12 Scott Dattalo <scott@dattalo.com>
	* src/gpsim_time.cc: Added diagnostic printf's
	* src/pic-processor.cc, src/pic-processor.h, src/processor.cc,
	src/processor.h: add an option to not update the gui while single
	stepping.

2004-10-11 Scott Dattalo <scott@dattalo.com>
	* src/cod.cc, src/processor.cc: Applied, but modified, patch from
	Craig Franklin that brings gpsim up to date with new gputils release.

2004-10-07 Scott Dattalo <scott@dattalo.com>
	* gui/gui_breadboard.cc, gui/gui_breadboard.h, gui/gui_menu.cc:
	Cleaned up the gui breadboard code a little by making the gui_module
	structure a GuiModule class. In addition, new modules are queued
	into the breadboard and realized only after the breadboard has
	been built.

2004-10-07 Scott Dattalo <scott@dattalo.com>
	* gui/gui_src_opcode.cc: window was being built before cpu had been
	initialized.
	* cli/cmd_disasm.cc, src/processor.cc, src/trace.cc: Disassembling
	and tracing had wrong addresses for the 18F family (again...)

2004-10-06 Scott Dattalo <scott@dattalo.com>
	* gui/gui_src.h, gui/gui_src_asm.cc, gui/gui_src_opcode.cc,
	gui/gui_statusbar.cc, src/breakpoints.cc: Fixed breakpoint
	icon refreshing. Also fixed  Source browser window creation if either
	~/gpsim is missing or the registry hasn't been initialized

2004-10-05 Scott Dattalo <scott@dattalo.com>
	* gui/gui_src_asm.cc: Moved the creation of the Search Dialog
	window out of Build() and into its own function. Changed the behavior
	of the signal callbacks to conform to GTK+ 2.X

2004-10-04 Scott Dattalo <scott@dattalo.com>
	* README, INSTALL: Cleaned up stale documentation.

2004-10-04 Scott Dattalo <scott@dattalo.com>
	* cli/input.cc: Send an extra CR to the parser when loading a
	command file. Turns out that when the gui loads a file, the
	parser doesn't process it until another CR is seen.

2004-10-04 Scott Dattalo <scott@dattalo.com>
	* gui/gui_src_asm.cc, gui/gui_regwin.cc, gui/gui_breadboard.cc:
	Removed some debugging printfs.
	* gui/gui_object.cc:
	With GTK+ 2.2.1 under linux, the gtk_widget_show() was losing
	the (x,y) position of the window.

2004-10-04 Scott Dattalo <scott@dattalo.com>
	* gui/gui_breadboard.cc, gui/gui_breadboard.h:
	The breadboard expose events invalidated drawing areas which in
	turn recursively generated expose events. I'm not sure why this
	code worked with GTK+ 1.x

2004-10-04 Scott Dattalo <scott@dattalo.com>
	* gui/gui_breadboard.cc, gui/gui.h, gui/gui_stopwatch.cc,
	gui/gui_object.cc, gui/gui_main.cc, gui/gui_object.h,
	gui/gui_profile.cc, gui/gui_regwin.cc, gui/gui_scope.cc,
	gui/gui_src.h, gui/gui_src_asm.cc, gui/gui_src_opcode.cc,
	gui/gui_stack.cc, gui/gui_stopwatch.cc, gui/gui_symbols.cc,
	gui/gui_trace.cc, gui/gui_watch.cc:
	Work in progress - trying to resolve breadboard start up
	issues with GTK+ 2.X .

2004-10-03 Borut Razem <borut.razem@siol.net>
	* config_win32.h.in, plat/win32/configure_win32.awk,
	  cli/cli.vcproj, src/src.vcproj,
	  plat/win32/make.mingw, makefile.mingw, cli/makefile.mingw, gpsim/makefile.mingw,
	  gui/makefile.mingw, modules/makefile.mingw, src/makefile.mingw:
	  added configure_win32.awk script, which takes version number from
	  configure.in and inserts them into config_win32.h.in and generates cofig.h
	* plat/win32/gpsim.def: MSVC sync

2004-10-01 Scott Dattalo <scott@dattalo.com>
	* src/processor.cc, src/processor.h, gui/gui.h, gui/gui_regwin.c
	gui/gui_asm.cc, gui/gui_src_opcode.c, plat/win32/make.mingw:
	Stabilizing windows port. Apparently under windows there's a
	problem if you issue too many gui calls to the GTK library. I
	found that this can be mitigated by periodically clearing out
	the gtk event queue.

2004-09-29 Scott Dattalo <scott@dattalo.com>
	* cli/input.cc, gui/gui_menu.cc, gui/gui_src_asm.cc,
	src/modules.h, src/modules.cc, src/processor.cc,
	src/pic-processor.cc, src/pic-processor.h, src/trace.h
	plat/win32/gpsim.def: Clean ups to get the Windows
	port to compile.

2004-09-29 Scott Dattalo <scott@dattalo.com>
	* gui/gui_src_asm.cc, src/pic-instructions.cc: Uninitialized variables
	in the instruction class were causing the source browser to
	place objects beyond the range allocated to the source browser.
	This confused GTK+ 2.x.

2004-09-28 Scott Dattalo <scott@dattalo.com>
	* cli/cmd_load.cc, cmd/input.cc:
	Allow loading of filenames with spaces. (note, gpsim's
	command line interface still does not support this).

2004-09-28 Scott Dattalo <scott@dattalo.com>
	* gui/gui_main.cc, gui/gui_menu.cc, gui/gui_object.cc,
	gui/gui_object.h, gui/gui_regwin.cc, gui/gui_src.h,
	gui/gui_src_asm.cc, src/gpsim_interface.h, M src/interface.cc:
	- Fixed a few bugs caused by upgrading to GTK+ 2.x:
	  -- Window state was not being saved
	  -- Register window font was fouled up
	  -- Source browser pixel position calculations are different
	  There are still some other bugs that need to be fixed:
	  -- The breadboard window somehow prevents the Source browser
	     window from opening
	  -- <control>Q no longer quits
	  -- scrolling in source browser only works if the scroll pane
	     has focus
	  -- The register window cheats in guessing character width.

2004-09-24 Scott Dattalo <scott@dattalo.com>
	* src/processor.cc: save_state() was skipping address 0.
	* src/registers.cc: Bit string encoding has been enhanced

2004-09-15 Scott Dattalo <scott@dattalo.com>
	* gui/gui_regwin.h, gui/gui_regwin.cc: max allowable registers
	is 64k (used to be 4k)
	* gui/gui_src_asm.cc: improperly initialized instructions were
	causing a core dump.

2004-09-19 Borut Razem <borut.razem@siol.net>
	* configure.in: gpsim is configured to link with GTK+ 2.x by default.
	  Use --enable-gtk1 for linking with GTK+ 1.x (deprecated).

2004-09-15 Scott Dattalo <scott@dattalo.com>
	* gui/gui_regwin.cc, gui/gui_src_asm.cc: Fixed ranging checks.

2004-09-15 Scott Dattalo <scott@dattalo.com>
	* src/processor.cc, src/processor.h, src/pic-processor.cc:
	getWriteTT and getReadTT used to return TraceType objects,
	but now they return unsigned ints.

2004-09-15 Scott Dattalo <scott@dattalo.com>
	* src/processor.cc, src/trace.cc, gui/gui_src_opcode.cc:
	- 18f processors' addresses were off by a factor of two in
	disassembly operations.

2004-09-14 Borut Razem <borut.razem@siol.net>
	* cli/cli.cvproj, src/src.vcproj, plat/win32/gpsim.def: MSVC sync
	* cli/makefile.mingw, src/makefile.mingw: MinGW sync
	* plat/win32/gpsim.nsi: corrected revision number to 0.22.3

2004-09-14 Scott Dattalo <scott@dattalo.com>
	* regression/p12ce518/p12c518.asm, regression/p12ce518/p12c518.stc,
	regression/p12ce518/EEdriver.asm: Added a regression test
	for the 12ce518.
	* src/stimuli.cc, src/i2c-ee.cc, src/ioports.cc, src/stimuli.h,
	src/14bit-registers.cc:
	Fixed stimuli so that the 12CE518 internal EEPROM would work.

2004-09-13 Scott Dattalo <scott@dattalo.com>
	* src/i2c-ee.cc, src/i2c-ee.h, src/ioports.cc, src/p12x.cc,
	src/stimuli.cc, src/stimuli.h: Partially check in for work
	on the 12ce518 bug (internal I/O pins).

2004-09-12 Scott Dattalo <scott@dattalo.com>
	* cli/Makefile.am, cli/errors.cc, cli/errors.h:
	* src/Makefile.am, src/errors.cc, src/errors.h:
	Moved errors.* from cli/ to src/
	* src/expr.cc, src/operator.cc, cli/cmd_disasm.cc,
	cli/cmd_set.cc, cli/cmd_x.cc, cli/command.cc, cli/command.h,
	cli/parse.yy, cli/scan.ll:
	Updated the directory path for including errors.h.

2004-09-12 Borut Razem <borut.razem@siol.net>
	* cli/cli.cvproj, src/src.vcproj, plat/win32/gpsim.def: MSVC sync
	* cli/makefile.mingw, src/makefile.mingw, gpsim/makefile.mignw: MinGW sync

2004-09-11 Scott Dattalo <scott@dattalo.com>
	* configure.in: Bumped the Revision up to 0.22.3 since there
	have been *so* many changes.
	* cli/expr.h, cli/expr.cc, cli/operator.cc, cli/operator.h:
	  - moved to the src/ directory
	* src/expr.h, src/expr.cc: copied from the cli/ directory
	* src/Makefile.am, cli/Makefile.am
	* src/symbol.h, src/value.h, src/symbol.cc, src/value.cc:
	  - It turns out that gpsim's symbols are essentially identical
	to the value objects that were recently added to support
	expression parsing. Since expressions need to handle symbols
	too, I decided to make the Value class a base class for
	gpsimValue. Now, much of what has been written for
	expressions will naturally handle many of gpsim fundamental
	types.
	* src/pic-processor.cc, src/pic-processor.h, src/eeprom.cc,
	src/eeprom.h, src/14bit-registers.cc: The W register, eeprom,
	and option register states were not saved during a processor
	'save_state()' call.
	* src/p12x.cc: internal 12ce518 i2c module was not connected
	correctly.
	* cli/cmd_clear.cc, cli/cmd_disasm.cc, cli/cmd_frequency.cc,
	cli/cmd_log.h, cli/cmd_macro.cc, cli/cmd_module.h,
	cli/cmd_set.cc, cli/cmd_step.cc, cli/cmd_stimulus.h,
	cli/cmd_symbol.cc, cli/cmd_trace.cc, cli/cmd_trace.h,
	cli/cmd_x.cc, cli/command.cc, cli/command.h:
	Updated the paths to the include files that have moved

2004-09-08 Scott Dattalo <scott@dattalo.com>
	* cli/cmd_x.cc, cli/expr.cc, cli/expr.h, cli/operator.cc,
	cli/operator.h, cli/parse.yy, cli/scan.ll:
	 - Added command line comparison expressions.
	* src/pic-processor.cc, src/pic-registers.cc, src/symbol.cc,
	src/symbol.h, src/value.cc, src/value.h:
	- Added support for a generic symbol type.
	- Added the pic PC object to the symbol table.
	* regression/digital_stim/digital_stim.stc:
	The new expression parsing introduced a grammer conflict that
	requires a stimulus data list to be expressed differently.

2004-09-08 Scott Dattalo <scott@dattalo.com>
	* src/14bit-registers.h, src/14bit-tmrs.h, src/breakpoints.cc,
	src/breakpoints.h, src/eeprom.h, src/gpsim_interface.h,
	src/gpsim_time.cc, src/gpsim_time.h, src/i2c-ee.h,
	src/p16x7x.h, src/pic-processor.cc, src/processor.cc,
	src/processor.h, src/ssp.h, src/stimuli.cc,
	src/stimuli.h, src/tmr0.h, src/trace.h, src/uart.h
	gui/gui_profile.cc, modules/encoder.h, modules/paraface.h
	modules/usart.cc:
	Started adding Triggers and Actions.
	* regression/run_regression.sh: Added the digital_stim
	regression test to the list of tests to run.

2004-09-07 Scott Dattalo <scott@dattalo.com>
	* src/stimuli.cc, src/stimuli.h, cmd_x.cc, cmd_stimulus.cc:
	Digital asynchronous stimuli were not getting the proper voltage
	data values.
	Enhanced the asynchronous stimulus by making the data array an
	array of C++ objects instead of a type casted structured.

2004-09-06 Scott Dattalo <scott@dattalo.com>
	* examples/14bit/analog_stim2.stc, examples/14bit/ap.stc,
	examples/14bit/async_pulse.stc, examples/14bit/async_stim2.stc,
	examples/14bit/dtmf.stc, examples/12bit/gpio_stim.stc:
	- Updated the asynchronous stimulus syntax in all of the example
	startup scripts

2004-09-05 Scott Dattalo <scott@dattalo.com>
	* src/ioport.cc, src/stimuli.cc:
	Applied patch from Robert Pearce regarding I/O Pins and stimuli
	Fixed a couple more issues with I/O pins and contention.

2004-09-02 Borut Razem <borut.razem@siol.net>
	* cli/socket.cc: read complete line before procesing,
	  support for different line endings (LF, CR-FL)
	* cli/cmd_macro.cc: enable compilation on VS 7.1

2004-09-02 Scott Dattalo <scott@dattalo.com>
	* cli/cmd_macro.cc:
	Clarified the help description for the macro command.

2004-09-02 Scott Dattalo <scott@dattalo.com>
	* cli/cmd_macro.cc, cli/cmd_macro.h, cli/scan.h, cli/scan.ll:
	Completed support for parameterized macros

2004-09-02 Scott Dattalo <scott@dattalo.com>
	* cli/cmd_macro.cc, cli/cmd_macro.h, cli/input.cc,
	cli/parse.yy, cli/scan.ll: Added support for parameterized
	macros. This is not completed

2004-09-02 Borut Razem <borut.razem@siol.net>
	* cli/input.cc, cli/socket.cc: socket port to WIN32
	* gpsim/gpsim.vcproj, cli/cli.vcproj, cli/makefile.mingw,
	  gpsim/makefile.mingw: added cmd_macro.* and socket.cc to
	  the project, wsock32.lib dependency

2004-09-01 Scott Dattalo <scott@dattalo.com>
	* cli/parse.yy: Fixed a bug that caused old versions of bison
	to choke.

2004-09-01 Scott Dattalo <scott@dattalo.com>
	* cli/cmd_macro.cc, cli/input.cc:
	Converted the LLInput struct into a class. Now, the macro
	command can invoke a macro and redirect it's output to the
	parser stream.
	* src/trace.cc, src/trace.h:
	Added the ProcessorTraceObject to the TraceObject heirarchy.
	Now, TraceObjects no longer store info about a processor.
	(Thus modules can be processor agnostic.)

2004-09-01 Scott Dattalo <scott@dattalo.com>
	* src/p16x5x.cc: The 16C55 processor was only declaring a
	package of 18 pins (instead of 28).

2004-08-31 Scott Dattalo <scott@dattalo.com>
	* cli/cmd_macro.cc, cli/cmd_macro.h:
	Added the 'macro' command.
	* cli/Makefile.am, cli/parse.yy, cli/command.cc, cli/scan.ll:
	Parser now calls the gpsim command cmd_macro.

2004-08-31 Scott Dattalo <scott@dattalo.com>
	* cli/scan.ll, cli/parse.yy:
	Added language support for macro definitions. (although,
	macros are not yet supported).

2004-08-29 Borut Razem <borut.razem@siol.net>
	* plat/win32/gsim.def, cli/makefile.migw, src/makefile.migw,
	  cli/cli.vcproj, src/src.vcproj: updated
	* cli/errors.h, cli/scan.ll: corrected include paths
	* plat/win32/gpsim.nsi: gpsom.pdf included in WIN32 setup
	* doc/gpsimWin32.html: gtk+ 2.4.7

2004-08-27 Scott Dattalo <scott@dattalo.com>
	* src/breakpoints.cc, src/gpsim_object.cc, src/gpsim_object.h,
	  src/modules.cc, src/modules.h, src/pic-processor.cc,
	  gui/gui_src_asm.cc, gui/gui_statusbar.cc:
	The Module class was overriding functionality provided in the
	gpsimObject class. This caused problems for external processors
	(That is, processors not a part of gpsim).

2004-08-26 Scott Dattalo <scott@dattalo.com>
	* src/gpsim_object.cc, src/gpsim_object.h: New files that
	support the gpsimObject class. This is a base class for
	almost all gpsim objects.
	* cli/viewable.cc, cli/viewable.h: Removed. The functionality
	that was provide by these was moved to gpsimObject.
	* src/Makefile.am, src/modules.h, src/registers.cc,
	  src/registers.h, src/symbol.cc, src/value.cc, src/value.h,
	  cli/Makefile.am, cli/cmd_x.cc, cli/command.cc, cli/command.h,
	  cli/expr.cc, cli/expr.h, cli/parse.yy:
	Added the gpsimObject Meta class.
	Added support for symbolically viewing registers with the 'x'
	command.
	Added support for viewing a range of registers.

2004-08-26 Scott Dattalo <scott@dattalo.com>
	* src/stimuli.cc, src/symbol.cc, src/symbol.h,
	  gui/gui_profile.cc, gui/gui_stack.cc, gui/gui_symbols.cc
	  cli/scan.ll:
	The symbol class is now derived from the gpsimValue class.
	This change allows some of the recent enhancements created
	for other things to be applied to symbols as well.
	* examples/14bit/p16c64_pwm.stc, examples/14bit/portc_stim.stc:
	The PWM module was crashing. I'm not sure why, but I think
	what actually was happening that the example stc file
	was just broken.

2004-08-25 Scott Dattalo <scott@dattalo.com>
	* cli/cmd_trace.cc, src/14bit-registers.cc, src/trace.cc,
	  src/trace.h: Removed a stale option to the trace command
	and added a new option that will allow the decode trace
	buffer to be saved to a file.

2004-08-25 Manuel Bouyer <bouyer@antioche.eu.org>
	* src/stimuli.cc: fixed bug in finding the node voltage when
	3 or more stimuli are attached to a node.

2004-08-24 Scott Dattalo <scott@dattalo.com>
	* src/stimuli.cc: Attaching three or more stimuli to
	one node caused gpsim to hang.

2004-08-24 Manuel Bouyer <bouyer@antioche.eu.org>
	* src/stimuli.cc: Fixed iopin stimulus update.

2004-08-24 Scott Dattalo <scott@dattalo.com>
	* cli/cmd_attach.cc, cli/cmd_attach.h, cli/cmd_symbol.cc,
	  cli/cmd_symbol.h, cli/expr.cc, cli/expr.h, cli/parse.yy,
	  cli/scan.ll, src/stimuli.cc, src/stimuli.h, src/symbol.h:
	The attach command can now accept a list of symbols. Also,
	Nodes and stimuli are now added to the symbol table whenever
	they're constructed.

2004-08-19 Scott Dattalo <scott@dattalo.com>
	* src/processor.cc: writeTT and readTT were not initialized
	in Processor constructor.

2004-08-18 Scott Dattalo <scott@dattalo.com>
	* src/registers.cc, src/registers.h, src/symbol.cc,
	  src/symbol.h, src/trace.cc, src/trace.h, cli/cmd_symbol.cc,
	  cli/cmd_symbol.h, cli/expr.cc, cli/expr.h, cli/parse.yy,
	  cli/scan.ll:
	More improvements to tracing.
	Added some more symbolic command line processing.

2004-08-16 Scott Dattalo <scott@dattalo.com>
	* src/trace.cc, src/trace.h:
	CVS was broken.

2004-08-16 Scott Dattalo <scott@dattalo.com>
	* src/intcon.cc, src/intcon.h, src/processor.h, src/trace.cc
	src/trace.h, src/value.h:
	Trace stuff *** CVS is broken at the moment but will be fixed
	within 3 hours of the time stamp of this change

2004-08-14 Borut Razem <borut.razem@siol.net>
	* plat/win32/gpsim.nsi: small changes
	* doc/gpsimWin32.html: documented GCC compilation

2004-08-13 Scott Dattalo <scott@dattalo.com>
	* src/14bit-processors.cc, src/14bit-registers.cc, src/14bit-registers.h
	src/14bit-tmrs.cc, src/16bit-registers.cc, src/eeprom.cc, src/intcon.cc,
	src/ioports.cc, src/p16x7x.cc, src/pic-processor.cc,
	src/pic-registers.cc, src/pie.cc, src/pir.cc, src/processor.cc,
	src/processor.h, src/registers.cc, src/registers.h, src/ssp.cc,
	src/tmr0.cc, src/trace.cc, src/trace.h, src/uart.cc:
	More Tracing.

2004-08-11 Scott Dattalo <scott@dattalo.com>
	* src/trace.cc, src/trace.h, src/processor.cc, src/pic-processors.cc
	src/value.h, src/value.cc, src/registers.h, src/registers.cc,
	14bit-registers.cc:
	More trace stuff.

2004-08-10 Borut Razem <borut.razem@siol.net>
	* plat/win32/gpsim.nsi: packaging of examples, extras, ...
	* plat/win32/gpsim.def: updated exports
	* extras/lcd/lcd.cc, extras/lcd/lcdengine.cc, extras/lcd/lcdgui.cc,
	  extras/lcd/module_manager.cc: define IN_MODULE for modules, calling
	  accessor methods for global objects
	* modules/makefile.mingw, modules/modules.vcproj: removed unneeded
	  define MODULES_EXPORTS

2004-08-09 Scott Dattalo <scott@dattalo.com>
	* src/14bit-registers.cc, src/14bit-registers.h, src/14bit-tmrs.cc,
	src/16bit-registers.cc, src/attribute.cc, src/eeprom.cc, src/intcon.cc
	src/ioports.cc, src/modules.cc, src/p16x7x.cc, src/pie.cc, src/pir.cc
	src/registers.cc, src/ssp.cc, src/tmr0.cc, src/trace.cc, src/trace.h
	src/uart.cc, gui/gui_breadboard.cc, modules/led.cc, modules/paraface.cc
	modules/resistor.cc,modules/usart.cc:
	 Continuing this ongoing trace experiment.

2004-08-09 Scott Dattalo <scott@dattalo.com>
	* src/trace.cc, gpsim/main.cc: more experimental code
	* src/attribute.cc, src/attribute.h, gui/gui_breadboard.cc: Some annoying
	bug with attributes that I can't figure out. Problem appears when shared
	libraries are disabled.

2004-08-06 Scott Dattalo <scott@dattalo.com>
	* src/processor.cc, src/processor.h, src/registers.h, src/trace.cc:
	Partial implementation of trace reconstruction.

2004-08-04 Scott Dattalo <scott@dattalo.com>
	* src/14bit-registers.cc, src/16bit-processors.cc, src/16bit-registers.cc
	  src/p12x.cc, src/p16f62x.cc, src/p16f87x.cc, src/p16x5x.cc, src/p16x6x.cc
	  src/p16x7x.cc, src/p16x8x.cc, src/p18x.cc, src/pic-processor.cc,
	  src/pic-processor.h, src/processor.cc, src/processor.h, src/registers.cc
	  src/registers.h, src/tmr0.cc, src/trace.cc, src/trace.h, gui/gui_regwin.cc
	  cli/cmd_trace.cc:
	Two categories of changes have been made: First, the unitialized register
	concept has been propogated to all of the register constructions. Second,
	tracing has been improved yet again.

2004-08-04 Borut Razem <borut.razem@siol.net>
	* plat/win32/gpsim.nsi: packaging of MinGW executables
	* gpsim/gpsim.vcproj: cleanup
	* plat/win32/make.mingw, cli/makefile.mingw, gpsim/makefile.mingw,
	  gui/makefile.mingw, modules/makefile.mingw, src/makefile.mingw:
	  do not define NDEBUG to enable assertions in release version

2004-08-02 Borut Razem <borut.razem@siol.net>
	* gui/gui_breadboard.cc, gui/gui_menu.cc, src/hexutils.cc,
	  src/interface.cc, src/packages.cc, src/xref.cc:
	  reverted unneeded changes
	* config_win32.h.in, plat/win32/fd2raw.cpp: ifdefed MSVC specifics
	* cli/input.cc, src/pic_processor.cc: corrected the sequence of includes

2004-08-01 Borut Razem <borut.razem@siol.net>
	* makefile.mingw, cli/makefile.mingw, gpsim/makefile.mingw,
	  gui/makefile.mingw, modules/makefile.mingw, src/makefile.mingw,
	  plat/win32/make.mingw:
	  added mingw (cygwin -mno-cygwin) gcc WIN32 native makefiles
	* config_win32.h.in, gui/gui_breadboard.cc, gui/gui_menu.cc,
	  src/hexutils.cc, cli/input.cc, src/interface.cc, src/packages.cc,
	  src/pic_processor.cc, plat/win32/uxtime.h, src/xref.cc:
	  changes to enable mingw (cygwin -mno-cygwin) gcc WIN32 native
	  compilation
	* src/modules.cc: added initialization of widget Module class member
	* plat/win32/glist.cpp: corrected line formatting

2004-07-31 Borut Razem <borut.razem@siol.net>
	* plat/win32/gpsim.def: updated exports
	* acinclude.m4, src/breakpoints.cc, cli/input.cc: small cleanups

2004-07-29 Scott Dattalo <scott@dattalo.com>
	* src/14bit-instructions.cc, src/16bit-instructions.cc, src/pic-instructions.cc,
	src/pic-registers.cc, src/trace.cc, src/trace.h: The newly rewritten
	trace printing code was broken. The good news is that while fixing
	it, I found a way to save a little simulation time by not tracing
	the instruction opcodes.

2004-07-29 Scott Dattalo <scott@dattalo.com>
	* src/ioports.cc, src/ioports.h, src/modules.cc, src/registers.cc,
	src/registers.h, src/stimuli.cc, src/stimuli.h:
	Minor stimuli bug fixes, commenting and general cleanup.
	* cli/cmd_trace.cc, src/trace.cc, src/trace.h, src/trace_orb.h,
	src/pic-registers.cc, src/processor.cc, src/processor.h:
	Rewrote the trace printing code.

2004-07-24 Borut Razem <borut.razem@siol.net>
	* plat/win32/gpsim.def: updated exports
	* plat/win32/gpsim.nsi: don't cd when running gpsim
	* doc/gpsimWin32.html: XHTML 1.0 compliant, snapshots at a separate page

2004-07-22 Scott Dattalo <scott@dattalo.com>
	* src/stimuli.cc, modules/resistor.cc, modules/resistor.h:
	Bug fixes to the recent I/O pin redesign

2004-07-22 Scott Dattalo <scott@dattalo.com>
	* src/14bit-tmrs.cc, src/breakpoints.cc, src/breakpoints.h,
	src/i2c-ee.cc, src/ioports.cc, src/ioports.h, src/p16x7x.cc,
	src/p16x7x.h, src/packages.cc, src/pic-processor.h, src/processor.cc,
	src/processor.h, src/registers.cc, src/registers.h, src/ssp.cc,
	src/stimuli.cc, src/stimuli.h, src/uart.cc, modules/binary_indicator.cc,
	modules/binary_indicator.h, modules/led.cc, modules/led.h,
	modules/logic.cc, modules/logic.h, modules/paraface.cc,
	modules/paraface.h, modules/resistor.cc, modules/resistor.h,
	modules/usart.cc, modules/video.cc, modules/video.h:
	Rewrote the way stimuli are handled. Before, gpsim only used
	a single parameter (more or less) to represent the state of
	an stimulus. Now, two parameters are used. Currently, these
	parameters are designated as the voltage and impedance. Before,
	the single parameter was somewhat similar to a current.

2004-07-20 Scott Dattalo <scott@dattalo.com>
	* src/stimuli.h, src/stimuli.cc: added input leakage modelling
	to I/O pins.

2004-07-19 Scott Dattalo <scott@dattalo.com>
	* src/pic-processor.cc, src/pic-processor.h, src/pic-registers.cc,
	src/processor.h, src/processor.cc, gui/gui_statusbar.cc,
	gui/gui_stopwatch.cc, modules/usart.cc, cli/cmd_frequency.cc:
	Added new member functions to the Processor class to simplify
	handling time.

2004-07-17 Borut Razem <borut.razem@siol.net>
	* plat/win32/gpsim.def, src/src.vcproj, src/i2c-ee.cc:
	  small fixes for MSVC compilation

2004-07-16 Scott Dattalo <scott@dattalo.com>
	* gui/gui_statusbar.h, gui/gui_statusbar.cc: Now the status bar can
	accept an arbitrary of registers to display.
	* src/16bit-processors.cc, src/processor.h: Added BSR to the list
	of registers viewable in the status bar.
	* cli/cmd_trace.cc, cli/cmd_trace.h, cli/parse.yy, src/trace.cc: The
	trace raw option was broken.

2004-07-15 Scott Dattalo <scott@dattalo.com>
	* cli/input.cc, cli/socket.cc, gui/gui_main.cc: The newly created
	gpsim socket interface now uses GLib GIOChannels instead of Pthreads.

2004-07-14 Scott Dattalo <scott@dattalo.com>
	* gui_break.cc, gui_main.cc, gui_processor.cc, gui_processor.h,
	gui_regwin.cc gui_regwin.h, gui_src.h, gui_src_asm.cc,
	gui_src_opcode.cc, gui_statusbar.cc, gui_statusbar.h:
	Finished abstracting the gui status bar. Added a status bar to
	the source viewer.
	* 14bit-registers.cc, 14bit-registers.h, 14bit-tmrs.h,
	16bit-processors.cc, Makefile.am, eeprom.h, intcon.h, ioports.cc,
	ioports.h, p12x.cc, p12x.h, p16f62x.cc, p16x5x.cc, p16x6x.cc,
	p16x8x.cc, pic-processor.cc, pic-processor.h, pic-registers.cc,
	pic-registers.h, pie.h, pir.h, processor.cc, processor.h, registers.h:
	Cleaned up some stale code.
	Added a MemoryAccess class and made it the base class to the
	RegisterMemoryAccess and ProgramMemoryAccess classes.

2004-07-14 Robert Pearce <rob@bdt-home.demon.co.uk>
	* src/i2c-ee.cc, src/i2c-ee.h, src/Makefile.am: New files that support
	an i2c peripheral
	* src/p12x.cc, src/p12x.h, src/pic-processor.h, src/pic-processor.cc:
	Added the 12CE518 and 12CE519 processors.
	* src/ioport.cc: Fixed an ambiguity in the ioport trace logic.

2004-07-13 Scott Dattalo <scott@dattalo.com>
	* gui/gui_statusbar.cc: abstracting the status bar boxes.
	* src/pic-registers.cc: cross reference to Program Counter was broken.
	* src/processor.h, src/processor.cc: Added a set_PC method to the pma
	class

2004-07-12 Scott Dattalo <scott@dattalo.com>
	* gui/gui_statusbar.cc: abstracting the status bar boxes.
	* examples/scripts/gensquares.asm, examples/scripts/testgensquares.py,
	examples/scripts/testgensquares.py: Script testing

2004-07-12 Scott Dattalo <scott@dattalo.com>
	* cli/socket.cc: dinking around...
	* examples/scripts/testsocket.py:

2004-07-09 Scott Dattalo <scott@dattalo.com>
	* cli/socket.cc: Added a very thin object layer to the socket interface
	* examples/scripts/testsocket.py: added to the repository. This is
	a simple python script that will exercise all of the commands that
	gpsim will accept through a socket interface.

2004-07-08 Scott Dattalo <scott@dattalo.com>
	* gui/gui_main.cc, cli/socket.cc, cli/input.cc, configure.in: Added
	support for multithreading.
	* TODO: cleaned up the TODO list a little by removing some outdated
	items.

2004-07-08  Manuel Bouyer <bouyer@antioche.eu.org>
	* src/16bit-registers.cc, src/16bit-registers.h: Added put() and
	update_pin_directions() methods for the PORTC16 class

2004-07-07 Scott Dattalo <scott@dattalo.com>
	* cli/socket.cc: New file
	* cli/input.cc: init_gpsim() will now create a socket.
	Added a Socket class that is capable of creating a socket and
	accepting commands.
	* src/registers.h: added an option to fetch the RegisterValue object
	without causing a trace to be emitted.

2004-07-06 Borut Razem <borut.razem@siol.net>
	* gui/settings.h, gui/settings_exdbm.h, gui/settings_exdbm.cc,
	  gui/gui.h, plat/win32/settings_reg.h, plat/win32/settings_reg.cpp,
	  gui/gui.vcproj, gui/Makefile.am: added additional layer to hide
	  differences between eXdbm and WIN32 registry
	* store settings in registy on WIN32

2004-07-03 Borut Razem <borut.razem@siol.net>
	* plat/win32/gpsim.ico, plat/win32/gpsim.nsi: created NSIS setup script

2004-07-02 Scott Dattalo <scott@dattalo.com>
	* gpsim/input.cc, gui/gui_menu.cc: Now files are correctly
	loaded through the menu interface (File/Open)
	* cli/parse.yy, cli/scan.ll, cli/operator.cc, cli/operator.h:
	Added new binary operators: -,*,/,&,^,<<,>>

2004-07-02 Scott Dattalo <scott@dattalo.com>
	* gpsim/main.cc: Emit warning if a user specifies both
	a .hex file and a .cod file at the command line.

2004-06-30 Scott Dattalo <scott@dattalo.com>
	* plat/win32/gpsim.def: Added additional export definitions.
	* cli/cmd_clear.cc: type casting fixes.
	* src/breakpoints.h: added get_bp accessor function for the
	global bp (breakpoint) object
	* src/gpsim_time.h: now uses the bp accessor function.
	* src/processor.cc: If the listing file is not present,
	gpsim will not crash now...

2004-06-30 Scott Dattalo <scott@dattalo.com>
	* gpsim/main.cc, cli/input.cc:
	Starting gpsim in cli only mode would cause a crash.

2004-06-30 Borut Razem <borut.razem@siol.net>
	* plat/win32/gpsim.def: small fix for MSVC compilation

2004-06-28 Scott Dattalo <scott@dattalo.com>
	* cli/parse.yy, cli/misc.h, cli/cmd_symbol.cc, src/symbol.cc:
	Removed 'NUMBER' and 'FLOATING_NUMBER' types from the CLI parser. Now
	all numbers are represented by expressions. All commands that used to
	numbers have been converted over to use expressions.

2004-06-28 Scott Dattalo <scott@dattalo.com>
	* cli/cmd_module.cc, src/modules.h, src/modules.cc, gui/gui_breadboard.cc:
	Module positioning now works again.

2004-06-27 Scott Dattalo <scott@dattalo.com>
	* gui/gui_breadboard.cc: From Ralph, the breadboard was not
	using module pixmaps.
	* cli/cmd_module.cc, cli/cmd_module.h, cli/command.cc,
	cli/parse.yy: cli module command now supports expressions.

2004-06-27 Borut Razem <borut.razem@siol.net>
	* gpsim.sln: set project dependency - modules depends on gpsim
	* gpsim/gpsim.vcproj: corrected Ignore Specific Library settings
	* doc/gpsimWin32.html: added to CVS

2004-06-24 Scott Dattalo <scott@dattalo.com>
	* cli/cmd_break.cc, cli/cmd_break.h, cli/cmd_log.cc,
	cli/cmd_log.h, cli/cmd_stimulus.h, cli/command.cc,
	cli/command.h, cli/expr.cc, cli/expr.h, cli/parse.yy,cli/scan.ll:
	The 'break' and 'log' commands now accept expressions

2004-06-24 Borut Razem <borut.razem@siol.net>
	* plat/win32/fd2raw.cpp, plat/win32/fd2raw.h: functions to set the WIN32
	  console to raw mode.
	* cli/input.cc: call functions to set WIN32 console to raw mode
	* gui/gui.vcproj: added fd2raw.cpp and fd2raw.h to the project
	* cli/cli.vcproj: added errors.cc and errors.h to the project

2004-06-23 Scott Dattalo <scott@dattalo.com>
	* cli/Makefile.am, cli/cmd_attach.cc, cli/cmd_attach.h, cli/cmd_bus.cc, cli/cmd_bus.h
	* cli/cmd_clear.cc, cli/cmd_clear.h, cli/cmd_disasm.cc, cli/cmd_disasm.h,
	* cli/cmd_frequency.cc, cli/cmd_frequency.h, cli/cmd_node.cc, cli/cmd_node.h,
	* cli/cmd_set.cc, cli/cmd_set.h, cli/cmd_step.cc, cli/cmd_step.h,
	* cli/cmd_stimulus.cc, cli/cmd_stimulus.h, cli/cmd_trace.cc, cli/cmd_trace.h,
	* cli/cmd_x.cc, cli/command.cc, cli/command.h, cli/expr.cc, cli/expr.h,
	* cli/input.cc, cli/misc.h, cli/operator.cc, cli/operator.h, cli/parse.h,
	* cli/parse.yy, cli/scan.ll
	* gpsim/main.cc, gui/gui_breadboard.cc, src/processor.cc,
	* src/processor.h, src/stimuli.cc
	Rewrote the command parser and added expression parsing.
	* cli/errors.cc, cli/expr.cc, cli/operator.cc, cli/viewable.cc,
	  cli/errors.h, cli/expr.h, cli/operator.h, cli/viewable.h:
	New files for expression parsing.

2004-06-16 Borut Razem <borut.razem@siol.net>
	* plat/win32/gpsim.def, gui/gui_src_asm.cc, src/symbol.cc, src/symbol.h:
	  small fixes to enable compilation on MSVC

2004-06-15 Scott Dattalo <scott@dattalo.com>
	* more pedantic fixes

2004-06-14 Scott Dattalo <scott@dattalo.com>
	* more pedantic fixes (mostly in cli)

2004-06-14 Scott Dattalo <scott@dattalo.com>
	* tons of pedantic fixes (and there are many more needed).

2004-06-14 Scott Dattalo <scott@dattalo.com>
	* aclocal.m4, configure.in
	The AC_DEFINE macro was incompletely defined.
	* acconfig.h: removed from CVS
	* INSTALL: updated installation instructions for CVS checkouts
	* doc/gpsim_cvs.html: Added to the CVS

2004-06-12 Borut Razem <borut.razem@siol.net>
	* cli/viewable.cc: #warning not recognised by MSVC
	* eXdbm/eXdbm.vcproj, gui/gui.vcproj, modules.vcproj:
	  new project files for GUI support
	* gpsim.sln, gpsim/gpsim.vcproj, cli/cli.vcproj, src/src.vcproj:
	  GUI support
	* plat/win32/gpsim.def, plat/win32/modules.def: WIN32 def files for
	  DLL modules support
	* plat/win32/glist.cpp: added g_win32_error_message() for --disable-gui
	* cli/input.c: define gpsim_rl_getc() only if defined HAVE_READLINE &&
	  defined HAVE_GUI

2004-06-09 Scott Dattalo <scott@dattalo.com>
	* cli/expr.cc, cli/expr.h, cli/viewable.h, cli/viewable.cc,
	cli/operator.h, cli/operator.cc: New files to support parsing
	* cli/parse.yy, cli/scan.ll: added new parsing and lexing rules
	for expression parsing.
	* src/stimuli.cc: Manuel Boyer found and fixed a bug where the
	a named stimulus was ignoring its newly assigned name.

2004-06-09 Scott Dattalo <scott@dattalo.com>
	* cli/parse.yy, cli/scan.ll, cli/misc.h, cli/cmd_stimulus.cc, cli/command.h
	Cleaned up the parser by removing the explicit YYABORT and YYACCEPT macros.
	Also, redesigned the parser implementation of the stimulus command.

2004-06-03 Scott Dattalo <scott@dattalo.com>
	* examples/12bit/it_12bit.asm: removed
	* regressions/instructions_12bit/instructions_12bit.asm: added
	* regressions/instructions_12bit/instructions_12bit.stc: added
	Now the 12bit core has a regression test.

2004-06-05 Scott Dattalo <scott@dattalo.com>
	* src/eeprom.cc: The eeprom memory access object was not getting
	initialized.
	* src/stimuli.cc: applied patch from Manuel Boyer. The IO_open_collector
	was duplicating the base class' job of setting the pin name.

2004-06-02 Scott Dattalo <scott@dattalo.com>
	* cli/cmd_break.cc, src/processor.cc: 18fxxx addressing was broken.
	(the divide by 2 issue for the 18f addressess was not being handled
	correctly.)

2004-06-01 Scott Dattalo <scott@dattalo.com>
	* src/value.h: Made the string &name() member function in the
	gpsimValue class virtual.

2004-05-31 Scott Dattalo <scott@dattalo.com>
	* almost all files: Since the Register class and the Instruction class
	are now derived from gpsimValue, all objects that use registers
	and instructions have to change. These changes have been propogated
	through gpsim. Next, the gui will start taking advantage of the
	abstractness that this change introduces.
	* src/16bit-instructions.cc, src/14bit-instructions.h: Manuel Boyer
	reported two bugs with the 16bit subwf instruction. He fixed one
	(N-bit was ignored) with a patch and I fixed the other (OV bit was
	ignored).

2004-05-27 Scott Dattalo <scott@dattalo.com>
	* src/value.h, src/value.cc: New files that support abstract values.
	* src/register.h, src/pic-instructions.h:
	Now all base objects that have values are derived from the new
	gpsimValue object.

2004-05-27 Scott Dattalo <scott@dattalo.com>
	* src/breakpoints.h, src/breakpoints.cc: Execution breakpoints now
	support a customizable message that will be displayed when the
	break is encountered.

2004-05-21 Scott Dattalo <scott@dattalo.com>
	* src/processor.cc, src/register.h, register.cc, gui/gui_register.h,
	gui/gui_regwin.c: Gui Register Window now can show unitialized register
	data.

2004-05-21 Scott Dattalo <scott@dattalo.com>
	* src/register.h: Added new accessor member functions to the Register
	class to manipulate the new way register values are represented.

2004-05-20 Scott Dattalo <scott@dattalo.com>
	* Tons of files... Changed the Register class' 'unsigned int value'
	field to an object. The get() and put() accessor functions now provide
	read and write access.

2004-05-20 Scott Dattalo <scott@dattalo.com>
	* gui/gui_src_asm.cc: Syntax highlighting now is only applied to lines
	that are associated with generated code.

2004-05-16 Scott Dattalo <scott@dattalo.com>
	* src/processor.h, src/processor.cc:
	Added mapping between program memory and source file line numbers

2004-05-16 Scott Dattalo <scott@dattalo.com>
	* gui/gui_src.h, src/gui_src_asm.cc: Fixed memory leak with 'canbreak' XPM.
	Added 'SourcePage' class to hold information about a source browser notebook
	page. Corresponding info in 'SourceBrowserAsm_Window'.
	Added a new member to the sa_entry structure to keep track of pixmaps.

2004-05-15 Scott Dattalo <scott@dattalo.com>
	* src/pic-processor: If the simulation is started from an address that has
	an execution break, now gpsim will ignore that break.
	* xpm/canbreak.xpm: New xpm that's used to indicate source lines that will
	accept breakpoints.
	* gui/gui_src.h, gui/gui_src_asm.h: Added 'canbreak' XPM to the source
	browser lines that can accept break points. NOTE: this code currently
	leaks memory!

2004-05-12  Manuel Bouyer <bouyer@antioche.eu.org>
	* src/16bit-instructions.cc, src/p18x.cc, src/p18x.h, src/pic-instructions.cc,
	 src/pic-processor.cc, src/pic-processor.h: Fix usart problems in 18x devices.
	* src/pir.cc, src/pir.h, src/uart.cc, src/uart.h: Fix usart bugs.
	(Changes were submitted as a patch and applied by Scott).

2004-05-15 Scott Dattalo <scott@dattalo.com>
	* src/xref.h, xref.cc: added get_value() member function to XrefObject class
	* gui/gui.h, gui/gui_break.cc, gui/gui_main.cc, gui/gui_processor.cc,
	gui/gui_regwin.cc, gui/gui_regwin.h, gui/gui_statusbar.cc:
	Converted the structure labeled_entry into a class and renamed it
	to LabeledEntry.
	* gui/gui_statusbar.h: Added.

2004-05-12 Scott Dattalo <scott@dattalo.com>
	* cli/scan.ll: Identifiers can now contain dashes.

2004-05-12 Scott Dattalo <scott@dattalo.com>
	* src/stimuli.cc: bi-directional I/O pins were not working properly
	with modules.
	* src/processor.cc: removed debug printf stuff
	* src/ioports.cc: IOPORT class was using a hardcoded number of pins

2004-04-27 Borut Razem <borut.razem@siol.net>
	* cli/input.cc, gui/gui_main.cc: fixes to make working of CLI & GUI
	in parallel

2004-04-22 Borut Razem <borut.razem@siol.net>
	* modules/binary_indicator.cc modules/binary_indicator.h modules/encoder.cc
	modules/encoder.h modules/gpsim_modules.cc modules/led.cc modules/led.h
	modules/logic.cc modules/logic.h modules/paraface.cc modules/paraface.h
	modules/push_button.cc modules/push_button.h modules/resistor.cc
	modules/resistor.h modules/switch.cc modules/switch.h modules/usart.cc
	modules/usart.h modules/video.cc modules/video.h: defined IN_MODULE
	symbol for modules, call get_interface(), get_cycles(), get_active_cpu(),
	get_symbol_table(), get_trace(void) accessor methods instead direct object
	access

2004-04-21 Borut Razem <borut.razem@siol.net>
	* src/gpsim_interface.h, src/gpsim_time.h, src/processor.cc, src/symbol.cc,
	src/trace.cc: create instances of inline methods by taking theirs address,
	so that they can be accessed from dynamic loadable modules

2004-04-19 Scott Dattalo <scott@dattalo.com>
	* modules/binary_indicator.cc, modules/encoder.cc,
	modules/gpsim_modules.cc, modules/led.cc, modules/logic.cc,
	modules/paraface.cc, modules/push_button.cc, modules/resistor.cc,
	modules/switch.cc, modules/usart.cc, modules/video.cc:
	Fixed ambiguous (to read, but still syntactically correct)
	references to "new_name".
	* src/breakpoints.h, src/breakpoints.cc:
	added a post assertion option to the register assertions.

2004-04-18 Borut Razem <borut.razem@siol.net>
	* src/14bit-registers.h, src/gpsim_interface.h, src/gpsim_time.h,
	src/processor.h, src/symbol.h, src/trace.h: introduced get_interface(),
	get_cycles(), get_active_cpu(), get_symbol_table(), get_trace(void)
	accessor methods
	* config_win32.h.in: defined GPSIM_MAJOR_VERSION, GPSIM_MINOR_VERSION and
	GPSIM_MICRO_VERSION symbols

2004-04-15 Scott Dattalo <scott@dattalo.com>
	* src/14bit-tmrs.cc, src/ioports.cc, src/ioports.h: PORTC's T1OSC input
	can clock TMR1 on some PIC's. I've added some preliminary support for this.

2004-04-14 Scott Dattalo <scott@dattalo.com>
	* gui/gui_break.cc, gui/gui_menu.cc, gui/gui_profile.cc,
	gui/gui_src_asm.cc, gui/gui_src_opcode.cc, gui/gui_stack.cc,
	src/16bit-registers.cc, src/breakpoints.cc,
	src/cod.cc, src/eeprom.cc, src/ioports.cc, src/ioports.h,
	src/pic-processor.cc, src/processor.cc, src/processor.h,
	src/trace.cc:
	Made the processor's ProgramMemoryAccess class dynamically allocated.
	* src/Makefile.am: ssp.h was not part of the install.

2004-04-14 Scott Dattalo <scott@dattalo.com>
	* src/14bit-tmrs.cc: The TMR2 peripheral failed to properly clear
	its breakpoint whenever it was being turned off.
	*src/modules.h: string.h was not getting included.

2004-04-13 Scott Dattalo <scott@dattalo.com>
	* src/breakpoints.cc, src/breakpoints.h:
	Redesigned breakpoints so that a) they're more object oriented and b) more
	easily extensible.
	* src/interface.cc, src/gpsim_interface.h: Removed the CyclicBreakPoint class
	and moved the functionality it was providing into the gpsimInterface class
	* src/14bit-registers.h, src/14bit-tmrs.h, modules/usart.cc, cli/cmd_set.cc,
	src/eeprom.h, src/gpsim_time.cc, src/gpsim_time.h,
	src/p16x7x.h, src/pic-processor.cc, src/processor.cc,
	src/processor.h, src/ssp.h, src/stimuli.cc, src/stimuli.h, src/tmr0.h,
	src/trace.h, src/uart.h, gui/gui_profile.cc, modules/encoder.h, modules/paraface.h,:
	Removed the BreakCallBack class. The functionality it was providing is now
	implemented by the BreakpointObject class.

2004-04-11  Borut Razem  <borut.razem@siol.net>
	* src/interface.cc: added initialization of interface_seq_number in
	gpsimInterface constructor.

2004-04-07 Scott Dattalo <scott@dattalo.com>
	* src/breakpoints.h, src/breakpoints: Adding assertion type breakpoints
	and redesigning the whole Breakpoint class.

2004-04-07  Bert Driehuis <driehuis@playbeing.org>
	* extras/lcd/lcd.cc:  reference was made to a no-longer existing API
	* extras/lcd/module_manager.cc: contained comments
	which were out of date, that hampered readability.
	* src/modules.cc: will not load two shared extension modules, if the
	first does not have an "initialize" routine. As a side effect of
	debugging this one, the error reporting of the dynaloader has been
	expanded. The trick turned out to be to clear pre-existing error
	conditions with a dummy call to dlerror(). An alternative
	implementation would call dlerror in an else clause when loading
	"initialize" fails, but doing it like this patch does it has the
	advantage of also dealing with like errors in libraries gpsim might
	use. For a similar situation, look up "not a typewriter" and "perror"
	in Google.
	- did not immediately fail when incomplete linking
	conditions exist. By changing to RTLD_NOW, a bad dynamic module will
	be detected at load time rather than at run time. *** this will break
	broken modules out there that until now appeared to have worked ***

2004-04-04  Arthur Peters <amp@singingwizard.org>
	* src/Makefile.am, src/ssp.cc, src/ssp.h:
	Added SSP support to gpsim.
	* src/14bit-processors.h, src/ioports.cc, src/ioports.h,
	src/p16f87x.cc, src/p16x6x.cc, src/p16x6x.h, src/p16x7x.cc,
	src/p16x8x.cc, src/pir.cc, src/14bit-processors.h, src/pir.h:
	Added SSP support to gpsim.

2004-04-04  Borut Razem  <borut.razem@siol.net>
	* modules/encoder.cc, modules/gpsim_modules.cc, modules/paraface.cc,
	modules/push_button.cc, modules/switch.cc, modules/video.cc:
	modules port on WIN32

2004-04-03  Borut Razem  <borut.razem@siol.net>
	* src/stimuli.cc: fixed warning C4715: 'IOPIN::get_iop' : not all
	control paths return a value: IOPIN::get_iop() returns 0 in case that
	iopp and iop are NULL

2004-04-01 Scott Dattalo  <scott@dattalo.com>
	* modules/resistor.cc, modules/resitor.h: Several member functions
	in the resistor classes were declared, but not defined anywhere.
	* src/pic-instructions.h, src/breakpoints.h, src/breakpoints.cc:
	adding assertions to the simulator.
	* src/processor.cc, src/processor.h, gui/gui_src_asm.cc: Source
	browser windows can now get a unique name.

2004-03-30 Scott Dattalo  <scott@dattalo.com>
	* numeous files throughout gpsim: The Module class now uses
	a string type instead of a 'char *' for the module name. Also,
	the gui x and y coordinate were removed from the module class (I
	still want to remove the 'widget' member too).
	* modules/usart.cc: calls to the old gpsim api were still lingering
	around here.
	* gui/gui_src_asm.cc, gui/gui_src.h, src/processor.h: more browser
	splitting stuff.

2004-03-29  Borut Razem  <borut.razem@siol.net>
	* src/modules.cc: support of external modules on WIN32

2004-03-25 Scott Dattalo  <scott@dattalo.com>
	* gui/gui_src_asm.cc: Now we can load hex files again.

2004-03-25  Bert Driehuis <driehuis@playbeing.org>
	* extras/lcd/lcdengine.cc, extras/lcd/lcdengine.cc,
	extras/lcd/lcd.h, extras/lcd/lcdgui.cc, extras/lcd/examples/lcd.asm:
	Added support for CGRAM in the LCD module.

2004-03-25 Scott Dattalo  <scott@dattalo.com>
	* src/processor.h, src/processor.cc: Added pma_context list
	* gui/Makefile.am: Recently added .h files are now in the Makefile
	* gui/gui_src.h, gui/gui_src_asm.cc: Multiple source browsers are
	now created based on the number of pma_contexts
	* gui/gui_object.h, gui/gui_src_asm.cc, gui/gui_breadboard.cc,
	gui/gui_main.cc, gui/gui_profile.cc, gui/gui_regwin.cc,
	gui/gui_scope.cc, gui/gui_src.cc, gui/gui_src_opcode.cc,
	gui/gui_stack.cc, gui/gui_stopwatch.cc, gui/gui_symbols.cc,
	gui/gui_trace.cc, gui/gui_watch.cc:
	The GUI_Object 'name' member has been changed from a char * to a
	private string and is now no longer directly accessed by the derived
	classes. New methods set_name() and and name() control the access.

2004-03-24 Scott Dattalo  <scott@dattalo.com>
	* gui/gui_src_asm.cc, gui/gui_src.h: Added BreakPointList class to handle
	the 3 lists of breakpoints. Removed duplicate code too.

2004-03-23  Borut Razem  <borut.razem@siol.net>
	* src/modules.cc: gpsim on WIN32 doesn't support modules yet
	* gui/gui_breadboard.cc: GTK+ 2.x port

2004-03-22 Scott Dattalo  <scott@dattalo.com>
	* gui/gui_src.cc: Changed the event key processing from a case statement to
	a C++ map object.

2004-03-22 Scott Dattalo  <scott@dattalo.com>
	* gui/gui.h, gui/gui_breadboard.h, gui/gui_object.h, gui/gui_processor.h,
	* gui/gui_profile.h, gui/gui_register.h, gui/gui_regwin.h, gui/gui_scope.h,
	* gui/gui_src.h, gui/gui_stack.h, gui/gui_stopwatch.h, gui/gui_symbols.h,
	* gui/gui_trace.h, gui/gui_watch.h:
	Finished the gui split started on 03-16.
	Added support for multiple source browsers (to be used with context debugging).

2004-03-22 Chris Emerson <gpsim@mail.nosreme.org>
	* modules/encoder.cc, modules/encoder.h: new files: added an encoder module
	* modules/Makefile.am: Added the encoder to the list of files.
	* gpsim/main.cc: gracefully revert to cli if gtk_init fails.
	* src/ioports.cc: remove PORTA debug message.

2004-03-17 Scott Dattalo  <scott@dattalo.com>
	* gui/gui.h, gui/gui_breadboard.h, gui/gui_object.h, gui/gui_processor.h,
	* gui/gui_profile.h, gui/gui_register.h, gui/gui_regwin.h, gui/gui_scope.h,
	* gui/gui_src.h, gui/gui_stack.h, gui/gui_stopwatch.h, gui/gui_symbols.h,
	* gui/gui_trace.h, gui/gui_watch.h
	Split gui.h into a bunch of separate include files.

2004-03-16 Scott Dattalo  <scott@dattalo.com>
	* gui/gui_regwin.cc, gui/gui.h:
	abstracted the width of registers

2004-03-15 Scott Dattalo  <scott@dattalo.com>
	* src/modules.h, src/modules.cc:
	Removed the "ExternalModule" class
	* modules/binary_indicator.cc, modules/gpsim_modules.cc,
	modules/led.cc, modules/logic.cc, modules/paraface.cc,
	modules/push_button.cc, modules/resistor.cc, modules/switch.cc,
	modules/usart.cc, modules/video.cc, extras/lcd/lcd.h,
	extras/lcd/lcd.cc
	Now the modules are no longer "external".

2004-03-14  Bert Driehuis <driehuis@playbeing.org>
	* extras/lcd/lcdengine.cc, extras/lcd/lcd.h, extras/lcd/examples/lcd.asm:
	Fixed the LCD modules "E" logic.

2004-03-13 Robert Pearce
	* src/16f87x.cc, src/16f87x.h, src/pic-processor.cc, src/pic-processor.h:
	Added 16f871.

2004-03-09 Scott Dattalo  <scott@dattalo.com>
	* src/16bit-instructions.cc, src/trace.cc:
	Addresses displayed for the 18F devices are now displayed properly.

2004-03-09 Scott Dattalo  <scott@dattalo.com>
	* src/14bit-processor.cc:
	PCL (low byte of program counter) was one count too large.

2004-03-09 Scott Dattalo  <scott@dattalo.com>
	* src/processor.cc, src/processor.h, src/pic-processor.cc, src/pic-processor.h:
	Moved the implementations of the disasm() and list() methods from the
	pic_processor class to the processor class.

2004-03-09 Scott Dattalo  <scott@dattalo.com>
	* src/pic-instructions.h, src/12bit-instructions.h, src/stimuli.h,
	src/14bit-instructions.h, src/14bit-instructions.h, src/16bit-instructions.h,
	src/16bit-instructions.cc: changed references of pic-processor to Processor.

2004-03-08 Scott Dattalo  <scott@dattalo.com>
	* modules/push_button.cc, modules/push_button.h: new module
	from Carlos Ghirardelli.

2004-03-04 Scott Dattalo  <scott@dattalo.com>
	* src/register.h, src/pic-register.h, src/pic-processor.h,
	src/pic-processor.cc, src/14bit-registers.cc
	Removed the "file_register" class. Moved the sfr_register class to register.h.

2004-03-04 Scott Dattalo  <scott@dattalo.com>
	* src/processor.h, src/processor.cc, src/cod.cc:
	Added the new meber 'Find()' to the 'Files' class.

2004-03-03  Bert Driehuis <driehuis@playbeing.org>
	* /extras/rs232-gen/rs232.c:  Now compiles under BSD

2004-03-03 Scott Dattalo  <scott@dattalo.com>
	* gui/gui_profile.cc, gui/gui_src_asm.cc, src/cod.cc,
	src/icd.cc, src/pic-processor.cc, src/processor.cc, src/processor.h
	Removed references to "processor_id". Changed name of _Files to Files
	in the Processor class.

2004-03-01  Bert Driehuis <driehuis@playbeing.org>
	* regression/run_regression.sh, regression/simulate:
	Fixes to allow regression tests to run on BSD 4.9.

2004-03-01  Bert Driehuis <driehuis@playbeing.org>
	* extras/lcd/lcd.cc:
	Bring the LCD module up-to-date with recent gpsim changes

2004-03-01  Bert Driehuis <driehuis@playbeing.org>
	* acinclude.m4, cli/input.cc:
	Fix readline support for BSD 4.9

2004-03-02 Scott Dattalo  <scott@dattalo.com>
	* src/pic-processor.cc: fixed a memory allocation bug in the
	FileContext class; an array was one element too small.
	* examples/modules/led_test, examples/modules/led_test/led_mod.asm, examples/modules/led_test/led_mod.asm:
	Added the LED test code to CVS.
	* modules/gpsim_modules.cc, modules/led.cc:
	LED module now works.

2004-03-01  Bert Driehuis <driehuis@playbeing.org>
	* src/icd.cc: include time.h for BSD

2004-03-01 Scott Dattalo  <scott@dattalo.com>
	* modules/* -
	Updated the (internal) modules to comply with the new gpsim interface standard
	* dozens of files:
	  -- removed all references to 'pic_id'
	  -- changed pic_processor references to Processor references


2004-02-29  Borut Razem  <borut.razem@siol.net>
	* src/eeprom.cc: initialization of variable eestate in EECON2::EECON2(void)
	by calling ee_reset()

2004-02-28  Borut Razem  <borut.razem@siol.net>
	* config_win32.h.in : strtoll defined as _strtoi64, removed definition
	of atoll, version number updated to 0.21.2
	* gui/gui.h, gui/gui_stopwatch.cc: prevent calling Update() from Update().
	The problem manifested on GTK+ 2.x on Linux and WIN32.
	* gui/gui_breadboard.cc, gui/gui_regwin.cc, gui/gui_src_asm.cc,
	gui/gui_src_opcode.cc: GTK+ 2.x port - use pango font handling
	* examples/14bit/pulse_measure.asm: variable upper renamed to _upper;
	upper is an assembler instruction operand in gpasm and mpasm

2004-02-28 Scott Dattalo  <scott@dattalo.com>
	* gui/gui_main.cc, gui/gui_menu.cc, gui/gui_processor.cc:
	Inhibit the half-baked gui_scope.

2004-02-27 Scott Dattalo  <scott@dattalo.com>
	* src/pic-processor.cc, src/interface.cc, src/interface.h,
	src/init.cc, src/icd.cc, src/cod.cc, src/breakpoints.cc,
	gui/gui_main.cc, gpsim/main.cc, cli/input.h, cli/input.cc,
	cli/cmd_x.cc, cli/cmd_run.cc, cli/cmd_dump.h, cli/cmd_dump.cc:
	The gpsim library, which is the code comprised of everything
	in the src/ subdirectory, now has no dependencies on the gui
	or cli code base. This makes it possible to link against
	just libgpsim.

2004-02-25 Scott Dattalo  <scott@dattalo.com>
	* gui/gui_stopwatch.cc, extras/rs232-gen/rs232-gen.c:
	changed all references of atoll to strtoll. bug 820326

2004-02-25 Hans-Juergen Dorn <hans.dorn@apl-landau.de>
	* src/16bit-registers.cc: gpsim was pushing onto
	the stack before decrementing the stack pointer. Also,
	the gpsim internally formatted address was being pushed.

2004-02-17  Scott Dattalo  <scott@dattalo.com>
	* gui/gui_scope.cc: expose and resizing kind of work.

2004-02-17  Scott Dattalo  <scott@dattalo.com>
	* gui/gui_scope.cc: taking off the rough edges.

2004-02-16  Scott Dattalo  <scott@dattalo.com>
	* gui/gui_scope.cc: - new file that will support a simple waveform viewer.
	* gui/Makefile.am: add the gui_scope.cc to the list
	* gui/gui_regwin.cc: Check for null pointers
	* gui/gui_symbols.cc: Check for null pointers
	* src/pic-processor.cc, src/p16x5x.h, src/p12x.h, src/p12x.cc,
	src/14bit-registers.h, src/14bit-registers.cc, src/14bit-processors.cc,
	src/12bit-processors.h, src/12bit-processors.cc
	Added FSR_12 - a new class for the 12-bit core. I also redesigned the
	way FSR and INDF interact.
	* src/p18x.cc - the 18f252 package pins weren't defined.

2004-02-13  Scott Dattalo  <scott@dattalo.com>
	* src/processor.cc, src/processor.h, src/pic-processor.cc, src/cod.cc:
	Support for new file context
	* gui/gui_src_asm.cc, gui/gui_profile.cc:
	Use the new file context code.

2004-02-12  Scott Dattalo  <scott@dattalo.com>
	* src/interface.cc, src/interface.h:
	Finally, the C-style interface is gone (or nearly gone).
	* src/processor.cc, src/processor.h, src/cod.cc
	Redesigning the "file_context" object.
	* gui/gui_watch.cc, gui/gui_profile.cc:
	Removed final traces of the old C-style interface.

2004-02-11  Scott Dattalo  <scott@dattalo.com>
	* gui/gui_symbols.cc: - changed strndup to a strcpy (plus malloc...):

2004-02-11  Scott Dattalo  <scott@dattalo.com>
	* gui/* changed calls to gpsim_* to the C++ interface.
	* src/interface.cc - removed many of the gpsim_* functions
	* src/stimuli.cc, cli/cmd_set.cc - changed calls to gpsim_* to
	the C++ interface.

2004-02-10  Scott Dattalo  <scott@dattalo.com>
	* src/processor.cc, src/processor.h, src/pic-processor.cc, src/pic-processor.h:
	Added step, run, and finish members to the ProgramMemoryAccess class
	* src/interface.cc, gui/gui*
	removed more gpsim_* functions from interface.cc

2004-02-10  Scott Dattalo  <scott@dattalo.com>
	* gui/gui_symbol.cc, src/symbol.h, src/symbol.cc
	Cleaned up symbol api.

2004-02-09  Scott Dattalo  <scott@dattalo.com>
	* all files!
	'NULL' has been replaced with '0' throughout all of gpsim.
	The reason is two-fold: 1) MAC users were having trouble compiling
	2) Stroustrup says NULL shouldn't be used in C++ :).

2004-02-08  Scott Dattalo  <scott@dattalo.com>
	* src/processor.cc, src/processor.h, gui/gui_src.cc, gui/gui_src_asm.cc,
	gui/gui_break.cc: Fixed 'ProgramMemoryAccess' class for the 18f devices
	* src/16bit-processors, src/p18x.cc: Removed some debug stuff
	* extras/lcd/*: Changed the LCD module from version 0.2.0 to 0.2.1

2004-02-06  Scott Dattalo  <scott@dattalo.com>
	* tons of files changed...
	Removed 'break_point' member from the Register class
	Changed the mechanism for checking how a break point is set on
	a register.
	* gui/gui.h, gui/gui_watch.cc, gui/gui_regwin.cc: modified GUIRegister
	class to adopt to changes made in the break point stuff. Also
	add rma member for getting access to processor registers.

2004-02-05  Scott Dattalo  <scott@dattalo.com>
	* src/pic-processor.h
	Fixed a nasty, nasty bug. The "GP_Processor" pointer in the
	pic_processor class was conditionally compiled. However the
	condition (HAVE_GUI) occurs in the include file config.h. Now
	the bug is that config.h was not included in all cases. Some
	classes were derived from pic_processor with this definition
	while others weren't. Syntactically, everything was okay. But
	the compile had the conflicting information for the size of
	pic_processor class.
	* src/* - whole bunch of other files touched while looking for
	this bug.

2004-02-04  Scott Dattalo  <scott@dattalo.com>
	* src/processor.cc
	Experimenting with operator [] for the ProgramMemoryAccess class.

2004-02-02  Scott Dattalo  <scott@dattalo.com>
	* src/intcon.*, src/processor.*, src/16bit-processor.*
	Fixed the weird bug that was discussed in the 2004-01-30 entry. The
	problem was basically invalid type casting. In the processor class
	heirarchy, there are about 5 or 6 levels of inheritance. Most of
	the time gpsim accesses a processor's details through one of the
	base classes. Sometimes though, an object needs access to somthing
	specific to a processor. In these cases, gpsim would type cast
	a pointer to the specific processor. The bug is that you can't
	safely type cast a base class object into a derived class object
	in C++.

2004-01-30  Scott Dattalo  <scott@dattalo.com>
	* almost all source files - still trying to sort out include
	dependencies. There's a weird bug where gcc is adding an extra
	4-byte offset to pointers in some instances. I have no clue why...

2004-01-29  Scott Dattalo  <scott@dattalo.com>
	* almost all source files - trying to sort out include dependencies

2004-01-28  Scott Dattalo  <scott@dattalo.com>
	* src/pir.h moved all of the PIR*::put()'s to the PIR base class
	* src/intcon.h, src/intcon.cc moved inline functions that called
	bp and trace objects from the header file to the .cc file.
	* src/pir.cc new file - added so that inline functions that called
	bp and trace objects could be removed from the header file.
	* src/Makefile.am added pir.cc to the list of src files.

2004-01-26  Scott Dattalo  <scott@dattalo.com>
	* src/* gui/*
	  Replaced references to 'file_register' with 'Register'.
	  Removed many gpsim_*() calls.
	  Renamed the program_memory_access class to ProgramMemoryAccess.
	  Moved processor member functions associated with code breakpoints
	  into the ProgramMemoryAccess class.

2004-01-26  Scott Dattalo  <scott@dattalo.com>
	* src/register.h, src/register.cc, src/pic-register.h, src/pic-processor.h,
	  src/14bit-registers.cc
	cleaned up some include file dependencies.
	moved the program counter class.

2004-01-23  Scott Dattalo  <scott@dattalo.com>
	* src/trace.cc, src/trace.h: added boolean event logger
	* src/intcon.cc, src/16bit-*: Debugging an interrupt problem
	with the 16-bit core

2004-01-22  Scott Dattalo  <scott@dattalo.com>
	* gui/gui*.cc: converted the cross_reference_to_gui structure
	into the CrossReferenceToGUI class.
	* src/pir.h: fixed default names of the PIR registers
	* regression/p16f873/p16f873.asm: added

2004-01-20  Scott Dattalo  <scott@dattalo.com>
	* gui/gui_regwin.cc, gui/gui_src_asm.cc, gui_watch.cc:
	  Changed gpsim_* api calls to their direct counterparts
	* src/interface.cc, src/interface.h:
	  Removed obsolete API's
	* src/breakpoints.cc (clear_all_register): added
	* cli/input.cc: fixed memory leak.
	* doc/gpsim.lyx: updated documentation with recent CLI changes

2004-01-18  Borut Razem  <borut.razem@siol.net>
	* configure.in: added --enable-gtk2 configure command line option for
	  linking with GTK+ 2.x

2004-01-17  Borut Razem  <borut.razem@siol.net>
	Update to GTK+ 2.x:
	* config_win32.h.in: version 0.21.1, updated #defines
	* cli/cmd_load.cc, cli/input.cc, cli/input.h:
	  char * replaced with const char *,
	  removed unneeded #include <sys/errno.h>
	* gui/gui.h, gui/gui_breadboard.cc, gui/gui_break.cc,
	  gui/gui_dialog.cc, gui/gui_menu.cc,gui/gui_object.cc,
	  gui/gui_profile.cc, gui/gui_regwin.cc, gui\gui_src.cc,
	  gui/gui_src_asm.cc, gui/gui_src_opcode.cc, gui/gui_stack.cc,
	  gui/gui_statusbar.cc, gui/gui_stopwatch.cc, gui/gui_symbols.cc,
	  gui/gui_trace.cc, gui/gui_watch.cc:
	  char * replaced with const char *,
	  GdkFont replaced with PangoFontDescription,
	  GtkStyle replaced with GtkStyle *,
	  #define GTK_ENABLE_BROKEN,
	  #include <sys/errno.h> replaced with #include <errno.h>,
	  update for GTK+ 2.x
	* src/cod.cc, src/interface.cc, src/interface.h, src/modules.cc,
	  src/modules.h, src/p16x5x.cc, src/pic-processor.cc,
	  src/pic-processor.h, src/processor.h, src/stimuli.cc, src/stimuli.h,
	  src/symbol.cc, src/symbol.h, src/trace.cc, src/trace.h:
	  char * replaced with const char *,
	  __PRETTY_FUNCTION__ replaced with __FUNCTION__
	* modules/binary_indicator.cc, modules/binary_indicator.h,
	  modules/led.cc, modules/led.h, modules/logic.cc, modules/logic.h,
	  modules/paraface.cc, modules/paraface.h, modules/resistor.cc,
	  modules/resistor.h, modules/switch.cc, modules/switch.h,
	  modules/usart.cc, modules/usart.h, modules/video.cc, modules/video.h:
	  char * replaced with const char *,

2004-01-06  Scott Dattalo  <scott@dattalo.com>
	* gui/gui_regwin.cc -- valgrind memcheck bug fixes
	* src/cod.cc
	* src/registers.cc

2004-01-06  Scott Dattalo  <scott@dattalo.com>
	* src/p16x5x.cc - patch from Rob Pearce that fixes the 16C5X tris writes.

2004-01-05  Scott Dattalo  <scott@dattalo.com>
	* src/14bit-tmrs.cc - tmr2 bug. PWM period was getting ANDed with 0xff.

2004-01-03  Scott Dattalo  <scott@dattalo.com>
	* Applied patch from Borut Razem - adds new files to Visual Studio project files.

2004-01-03  Scott Dattalo  <scott@dattalo.com>
	* Applied patch from Bradley McLean mailto:bradlist@bradm.net that adds support
	for the 18f1320.
	* Applied patch from Mike Durian that fixes an 18f SUB instruction.

2003-12-31  Scott Dattalo  <scott@dattalo.com>
	* Applied patch from Mike Durian. He's added several files to more reasonably
	group together portions of the simulator. In addition, he's added eeprom support
	to the 18f devices
	* src/eeprom.cc - new file to consolidate eeprom related stuff
	* src/intcon.cc - new file to consolidate variations in intcon registers
	* src/pie.cc - new file for pie register
	* src/intcon.h
	* src/pir.h
	* src/pic-instructions - fixed bug in 18f banking
	* src/16x5x.h - 16c54 register memory size was wrong
	* gui/gui_stopwatch.cc - added a check to make sure there's a processor
	* gui/gui_src*.cc - removed reference to cpu->pc->get_value()

2003-12-28  Scott Dattalo  <scott@dattalo.com>
	* another patch from Borut Razem:
	* cli/input.cc:
	    - added function get_dir_delim(), which searches for both /
	      and \ delimiters on WIN32 systems.
	    - fixed bug in gpsim_read(): logic for deallocating input_buf
	      was moved out of 'if (chars_left > 0)' block.
	    - some code cleaning, some compiler warnings fixed
	* cli/input.h:
	    - added declarations of exit_gpsim() and get_dir_delim()
	* gpsim/main.cc:
	    - removed declaration of exit_gpsim(), now included in cli/input.h
	* src/14bit-registers.cc:
	    - deallocation of name_str1 is already done in ~Register().
	* cod.cc:
	    - included cli/input.h for declaration of get_dir_delim()
	    - substr() replaced with get_string(), which gets the string from .cod
	      file. strings in .cod file are represented as:
	      - first byte defines the string length
	      - the string starts at the second byte.
	    - read_src_files_from_cod(): conversion to DOS file name
	    - open_cod_file() opens .cod file in binary mode
	* src/pic-instructions.cc:
	    - initialize xref to NULL if HAVE_GUI not defined
	* src/processor.cc,
	* src/processor.h:
	    - static pointer to the processor_list

2003-12-27  Scott Dattalo  <scott@dattalo.com>
	* patch from Borut Razem for Visual Studio projects

2003-11-29  Scott Dattalo  <scott@dattalo.com>
	* src/pic-processor.cc - rewrote the way gpsim groups together all of
	the processors it supports. Now the ProcessorConstructor class will
	allow processors to be instantiated anywhere in the code (before, they
	were declared in one giant array.)

2003-11-29  Scott Dattalo  <scott@dattalo.com>
	* src/16bit-registers.cc - Access to PLUSWx are now signed.

2003-11-28  Scott Dattalo  <scott@dattalo.com>
	* gui/* - More C to C++ conversions
	* gui/gui_menu.cc - Patch from Alex Holden to enable compilation on a MAC
	* src/icd.cc
	* INSTALL - added instructions for MAC OS

2003-11-24  Scott Dattalo  <scott@dattalo.com>
	* gui/* First round of struct to class conversion is now completed

2003-11-20  Scott Dattalo  <scott@dattalo.com>
	* src/ioports.cc - PORT B pullups were not working
	* regression/* - Added some more regression tests

2003-11-16  Scott Dattalo  <scott@dattalo.com>
	* gui/* More conversions to C++

2003-11-15  Scott Dattalo  <scott@dattalo.com>
	* gui/* started converting gui struct's into C++ classes. Started with
	Register Window.

2003-10-26  Scott Dattalo  <scott@dattalo.com>
	* src/gpsim-time.cc linked-list bug fixes.

2003-10-26  Scott Dattalo  <scott@dattalo.com>
	* eXdbm/* applied patch from  Borut Razem mailto:borut.razem@siol.net to
	fix an uninitialized pointer bug.

2003-10-26  Scott Dattalo  <scott@dattalo.com>
	* modules/* removed all references to gui if not building with the gui

2003-09-24  Scott Dattalo  <scott@dattalo.com> (patches from Steve Tell)
	* modules/paraface.h - Solaris patch for bogus device
	* src/cod.cc - Endian bug
	* gui/gui_processor.cc - use memset instead of bzero.

2003-09-14  Scott Dattalo  <scott@dattalo.com>
	* src/gpsim_time.h - changed cycle counter break point from a Singly linked
	list to a doubly linked list. This is in preparation for separating module
	time from pic processor time so that when the PIC goes to sleep, time
	doesn't stop.

2003-09-07  Scott Dattalo  <scott@dattalo.com>
	* src/p16f62x.h - duplicate declaration of intcon register

2003-09-07  Scott Dattalo  <scott@dattalo.com>
	* src/breakpoints.cc - this time the 'Too many cycle counter breakpoints' was
	fixed. BTW the problem was that 'clear_break' was not putting the cleared
	breakpoint back into the 'inactive' list

2003-09-07  Scott Dattalo  <scott@dattalo.com>
	* src/pic_processor.cc -- Fixed the "Too many cycle counter breakpoints" bug
	* src/interface.cc        It turns out that the "realtime" stuff was
	* src/breakpoints.cc      1) duplicating a class declaration. 2) not clearing
	* src/breakpoints.h       cycle counter break points.
	* gpsim.sln - added for win32 port.

2003-08-30  Scott Dattalo  <scott@dattalo.com>
	* src/p12x.cc -- The 12c5xx will reset if an I/O is toggled and the processor
	is sleeping.

2003-08-27  Scott Dattalo  <scott@dattalo.com>
	* config_win32.h.in - added

2003-08-25  Scott Dattalo  <scott@dattalo.com>
	* src/ioports.cc - more 16f628 Port A fixes

2003-08-19  Scott Dattalo  <scott@dattalo.com>
	* eXdbm/parse.c - "char" is used to store result of fgetc, but
	  EOF doesn't fit in the default unsigned chars.
	* src/cod.cc - an endian issue which made symbol values come out wrong.
	  - note these fixes came from a patch attached to an anonymous  bug report

2003-08-18  Scott Dattalo  <scott@dattalo.com>
	* src/ioports.cc - Port A on the F62x devices was named "ioport"
	* src/p16f62x.cc - intcon was not declared at 0x8b (bug 566165)
	* regression/p16f628.asm  - Added a regression test for the f68
	* regression/p16f628.stc

2003-08-17  Scott Dattalo  <scott@dattalo.com>
	* regression/* started the regression test directory. Only two
	tests are performed: instruction validation for the midrange
	family and a simple node test.

2003-08-17  Scott Dattalo  <scott@dattalo.com>
	* Huge patch from Borut Razem mailto:borut.razem@siol.net that enables
	gpsim to be compiled with MS Visual C under Windows.


2003-06-19  Scott Dattalo  <scott@dattalo.com>

	* src/gpsim_time.h Multiple breaks at one Cycle were getting clobbered.
	* src/gpsim_time.cc
	* src/16bit-registers.cc Added support for TMR3
	* src/pic-processor.h add pll_scale for the 18f devices.

2003-05-25  Scott Dattalo  <scott@dattalo.com>

	* src/breakpoints.cc program memory break points were not working.
	* Started formatting the Changelog properly

gpsim - Gnu Pic Simulator, a simulator for Microchip's PIC microcontrollers.

T. Scott Dattalo


gpsim-0.21.0
	* Starting with 0.21.0, Changelog will be properly formatted
	* Added 18f454,18455
	* Added breakpoint capability on nodes
	* Added spi Module
	* Added attributes to external usart module
	* Ralf rewrote the Breadboard
	* gui is now in C++
	* Added 16f627,16f628 processors
	* log command has been added (Command Line)
	* Profiling has been added (gui)
	* Trace viewer has been added
	* Added parport - parallel port loadable module
	* Source level debugging of C files
	* Added 16c55,16c62,16c63,16c72,16c73 processors
	* Added 18c442,18c452 processor
	* Added module attibutes (attribute.cc)
	* breadboard updates when either a tris or port is changed in the register viewer
	* Enhanced module interface - now LCD module works with gpsim
	* Patch from Rudy Moore to fix TMR0 bug
	* Beautified the Single Step and Trace dump outputs
	* Added break on stack overflow and underflow
	* Added break mask to wv/rv type break points. Now you can specify
	  which bits are significant.
	* Added "abort_gpsim_now" command. This will unconditionally abort gpsim.
	* Added "--cli" command line option. Invokes gpsim in command line
	  mode even if it has been configured to use the gui.
	* Program viewer can now display ASCII encode text in "dt" tables
	* Symbolic setting of execution breaks was not working.
	* C++ bugs fixed
	* Fixed WDT during SLEEP bug reported by Tor Fredrik Aas mailto:tfa@abn.hibu.no
	* USART baud rates were generated incorrectly and have been fixed.
	* TXIF was handled improperly (reported by Wojciech Zabolotny <wzab@ise.pw.edu.pl>)
	* TMR1 was incrementing even when disabled (Reported by Wojciech)
	* Patch from JG for Suse 7.1.
	* Patch from Robert Pearce to add 16C55
	* Sleep now works for 12c5xx.
	* Config word now works for 12c5xx
	* GPIO can wake a sleeping 12c5xx
	* Added pullup/pulldown resistors to the gpsim modules (idea from SET)
	* Numerous patches from from (SET) Salvador mailto:salvador@inti.gov.ar
	* SET - added "frequency" command
	* SET - Added time field to the gui status bar.
	* Carlos Nieves Ónega - Massive patch for the 17cxx core
	* Carlos Nieves Ónega - Registers for 17cxx core
	* From Salvador Eduardo Tropea mailto:salvador@inti.gov.ar
	  * Modified: In gpsim/main.cc put a cast in poptGetContext call, but perhaps
	    is a fault in the version I use of popt, double check it.
	  * Added: gtk_window_set_wmclass calls to help Enlightenment to remmember the
	   positions of the windows.
	  * Added: In gui/gui_main.c a couple of #undef to avoid redefinitions in
	    eXdbm.h. Also check if that's OK for the eXdbm you are using.
	  * Modified: Moved the INTCON register from _14bit_18pins class to child
	    classes. That's because I needed to inherit from it and P16X6X_processor
	    and both defines INTCON. I also think things are more clear in this way.
	  * Fixed: A bug in the A/D routines. If you started a conversion at the same
	    time you were enabling the A/D this conversion was aborted. To fix it I
	    transfered new_value to value before calling start_conversion().
	  * Added: Partial support for 16C712 and 16C716 CPUs, they inherit from 14bits
	    18pins processors because they have 18 pins and also from 16x6x because
	    they have TMR1, TMR2 and Capture/Compare facilities like in 16C63. I could
	    check it deeply, just the A/D part. I also didn't implement the DATACCP and
	    TRISCCP registers, I don't know how they work, but I think they control the
	    use of some I/O pins (normal or CCP function).


28JUL00 gpsim-0.20.0
  o Modules - gpsim now supports dynamically loaded modules
    -- module command
  o gui - upgraded to latest versions of gtk & gtkextra
  o gui - Menu items now work
  o gui - button bar
  o gui - now refreshes while simulating
  o gui - Stack Window has been added
  o BSD is now supported
  o numerous bug fixes

05APR00 gpsim-0.19.0
 o Daniel Schudel joins gpsim development.
   -- Added support for the 16x5x family
 o Added 16f87x family
 o gui - Added Program Memory sheet
    --  Added support for program memory writes
 o gui - Added Breadboard window (graphical pinout)
 o Asynchronous mode of the usart fixed.
 o A/D converter enhanced
 o Analog Stimuli revisited.
 o Scripting was fixed.
 o cli - Once again, gpsim can be built without the gui.

03FEB00 gpsim-0.18.0
 o cli - added 'processor pins' command to display
	 the state of a pic's I/O pins
 o cli - added 'set' command for modifying gpsim behavior
	 flags. set options supported:
	 -- verbose - if set, diagnostic info will be displayed
	 -- radix - not supported yet
	 -- gui_update - controls the rate at which the gui is refreshed
 o cli - added 's' option to the dump command to display only the
	 special function registers (and not the rest of ram).
 o 18cxxx:
   -- TBLRD & TBLWT instructions are now supported
   -- MULLW & MULWF instructions are now supported
   -- configuration word support
   -- tmr0 interrupt
 o Cycle counter - 64 bits is now fully supported
 o config word bug fixed
 o gui - added Watch window
 o gui - added more color coding to register window
 o gui - removed stagnant menu selections
 o gui - window state is saved between gpsim sessions
   -- This requires a new package `eXdbm'.
 o getopt is now used to process invocation options (now you can
   have spaces between the options and file names).
 o support >64k object code in .cod files
 o gtksheet has been removed from the distribution
   -- This means that you'll have to install gtk+-extra, the
      package that supports gtk-sheet (see INSTALL)
 o .cod file format bug fixes (you'll need the latest gpasm)
 o __config word for 18cxxx family is now supported

16NOV99 gpsim-0.17.0
 o gui - Major overhaul of Register Window
 o gui - Symbol window added
 o 18Cxxx
   -- Interrupts are now supported
   -- TMR0 is implemented
   -- USART asynchronous mode is supported
 o automake is now used to create the makefiles
 o version numbering has changed so that 'minor releases' (which by definition
   are the only ones I've made) are now expressed in the middle revision instead
   of the last revision number.
 o numerous bug fixes
 o Cycle counter is now 64 bits.


gpsim-0.0.16
 o 18Cxxx core has been added
 o Ralf Forsberg has joined me in development. His major contributions
   have been in the gui code. Some of what he's done:
   - Wrote a new source browser with these features:
     -- Syntax highlighting (e.g. opcodes and comments are colored differently)
     -- Iconic indicators (e.g. bitmaps indicating breaks, current pc...)
     -- Multiple sources
   - Significant restructuring of the gpsim to gui interface


28JUL99 gpsim-0.0.15
 o gui - asm source browser
 o gui - program memory browser
 o gui - register viewer enhancements
 o gui - control menu
 o numerous bug fixes

30JUN99 gpsim-0.0.14
  o gui
  o numerous bug fixes

25APR99 gpsim-0.0.13
  o Split the command line interface from simulator
    - created a `src' directory for the simulator
    - created a `cli' directory for the command line interface
  o Re-wrote the cli to use bison and flex (whew - whatabitch)
  o Hi-Tech C-compiler .cod files can be loaded by gpsim now.
  o Fixed C++ errors that egcs abhored but gcc ignored.

08MAR99 gpsim-0.0.12
  o Added support for .cod files (mostly in cod.cc)
  o Added more symbolic debugging features
  o Added 'list' command for listing source files
  o Updated the 'load' command for loading .cod files
  o Repeat last command with carriage return
  o Added more documentation

10JAN99 gpsim-0.0.11
  o Added support for the PIC16C74
  o Fixed core dumps associated with the 12C50x (again, dammit)
  o Fundamentally changed the way registers are created.
  o Added a 'config' script

20DEC98 gpsim-0.0.10
  o Added support for the PIC16C71
  o Enhanced the asynchronous stimulus to support analog values
  o Added a triangle_wave stimulus (mainly for testing)
  o Changed the behavior of 'run' to ignore a breakpoint if there is one set
    at the current instruction (see below)
  o Added a few examples illustrating the use of analog stimuli

07DEC98 gpsim-0.0.9
  o Added support for the 12c508 and 12c509
  o Bug Fixes:
     - DC bit wasn't updated correctly in add's and sub's (if W was the destination)
     - stack was rolling over after 7 pushes
     - goto's and call's were limited to 10 bits
  o Added the command line option '-v' and the command version. Both echo
    gpsim's version.
  o Enhanced 'it.asm' and added 'it_12bit.asm' - two routines that exercise
    gpsim's ability to simulate the pic instructions.
  o Added a trace for skipped instructions (before you'd see skipped instructions
    the same as non skipped ones in the trace buffer).


16NOV98 gpsim-0.0.8
  o Fixed pcl related bugs (see the new pcl_test.asm for examples)
  o Implemented the TMR2 peripheral
  o Implemented the CCP1 and CCP2 peripherals
  o Implemented the TMR1 peripheral
  o added more support for the PIC16C64
  o began support for the PIC16C65
  o fixed the configuration word loading that got broke in the last release

21OCT98 gpsim-0.0.7
  o added new command 'processor'
  o added new command 'load'
    - Startup command files can now be loaded any time and can be nested.
  o added new command 'symbol'
  o added new command 'reset'
  o redesigned the pic processor base class
  o added new file p16x8x
  o added support for the PIC16CR83, PIC16CR84, PIC16F83, PIC16F84
  o added new file p16x6x
  o added support for the PIC16C61
  o began support for the PIC16C64
  o Changed the command line invocation: -p now selects a processor and not a core (e.g. -p14 used to be the way gp
sim liked to select a device within the midrange, 14-bit family; now you must specify the specific device you wish
to simulate: -pp16c61 .)
  o Generally overhauled everything in anticipation of supporting the 12-bit core


30SEP98 gpsim-0.0.6
  o <CNTRL C> now can asynchronously halt the execution.
  o Multiplexed I/O pins are now supported (better). It's possible to clock TMR0 from an external clock now
  o The c84 is now fully supported - though not thoroughly debugged
  o I fixed two nasty cycle breakpoint bugs, single-stepping during a pending interrupt, and a couple of other minor annoyances.
  o I've begun formal documentation, but it is not included with this release.


18SEP98 gpsim-0.0.5
  o added new command 'node'
  o added new command 'attach'
  o redesigned the stimulus infrastructure.
  o added 'name' option to stimuli
  o iopins are now considered stimuli


04SEP98 gpsim-0.0.4
  o added new command 'stimulus'
  o added new command 'echo'
  o redesigned the breakpoint mechanism for register breaks
  o added support for startup configuration files
  o began support for stimulus files
  o began support for symbols
  o interrupts are working

28AUG98 gpsim-0.0.3
  o added support for interrupts
  o TMR0 and WDT are now working
  o added new command 'x' for examining/modifying registers
  o added a 'break wdt' - break on wdt timeout
  o now you can step over a breakpoint

17AUG98 gpsim-0.0.2
  o added readline library and made the command line interface more robust
  o eeprom is now working


30JUL98 gpsim-0.0.1
  o initial release - basic stuff

$Revision: 2506 $
